膨润土-钢渣复合吸附剂对Fe2+的吸附性能

研究了膨润土-钢渣复合吸附剂对模拟酸性矿山废水中Fe²⁺的吸附去除效果、Fe²⁺在吸附剂表面的赋存形态及其吸附机理和规律。结果表明：复合吸附剂在处理含Fe²⁺模拟酸性矿山废水时,不仅能释放碱性物质中和酸,且发生了吸附-聚沉协同作用;Fe²⁺可与膨润土发生晶格置换,还可通过静电吸附作用形成硅酸盐类矿物相,还有一部分通过配合作用生成多金属氧化物,最后一类是通过化学沉淀作用生成的 Fe（OH）₂或Fe（OH）₃受热分解而形成Fe₂O₃;被吸附的Fe²⁺中98.62%以残渣态形式存在于复合吸附剂中;复合吸附剂对Fe²⁺的吸附行为符合BET等温吸附模型和准二级动力学模型。     

Alum split applications strengthened phosphorus fixation and phosphate sorption in high legacy phosphorus calcareous soil

High phosphorus (P) saturation arising from historic P inputs to protected vegetable fields (PVFs) drives high P mobilisation to waterbodies. Amendment of soils with alum has shown potential in terms of fixing labile P and protecting water quality. The present 15 month pot experiment investigated P stabilisation across single alum application (Alum-1 treatment, 20 g alum/kg soil incorporated into soil before the maize was sown), alum split applications (Alum-4 treatment, 5 g alum/kg soil incorporated into soil before each crop was sown i.e. 4 × 5 g/kg) and soil only treatment (Control). Results showed that the Alum-1 treatment caused the strongest stabilisation of soil labile P after maize plant removal, whereas the P stabilisation effect was gradually weakened due to the transformation of soil non-labile P to labile P and the reduced active Al³⁺ in soil solution. For the Alum-4 treatment, soil labile P decreased gradually with each crop planting and was lower than the Alum-1 treatment at the end of the final crop removal, without any impairment on plant growth. The better P stabilisation at the end of Alum-4 treatment was closely correlated with a progressive supply of Al³⁺ and a gradual decrease of pH, which resulted in higher contents of poorly-crystalline Al, Fe and exchangeable Ca. These aspects were conducive to increasing the soil P stabilisation and phosphate sorption. In terms of management, growers in continuous cropping systems could utilise split alum applications as a strategy to alleviate P losses in high-P enriched calcareous soil.     

Cadmium removal mechanistic comparison of three Fe-based nanomaterials: Water-chemistry and roles of Fe dissolution

● nZVI, S-nZVI, and nFeS were systematically compared for Cd(II) removal. ● Cd(II) removal by nZVI involved coprecipitation, complexation, and reduction. ● The predominant reaction for Cd(II) removal by S-nZVI and nFeS was replacement. ● A simple pseudo-second-order kinetic can adequately fit Fe(II) dissolution. Cadmium (Cd) is a common toxic heavy metal in the environment. Taking Cd(II) as a target contaminant, we systematically compared the performances of three Fe-based nanomaterials (nano zero valent iron, nZVI; sulfidated nZVI, S-nZVI; and nano FeS, nFeS) for Cd immobilization under anaerobic conditions. Effects of nanomaterials doses, initial pH, co-existing ions, and humic acid (HA) were examined. Under identical conditions, at varied doses or initial pH, Cd(II) removal by three materials followed the order of S-nZVI > nFeS > nZVI. At pH 6, the Cd(II) removal within 24 hours for S-nZVI, nFeS, and nZVI (dose of 20 mg/L) were 93.50%, 89.12% and 4.10%, respectively. The fast initial reaction rate of nZVI did not lead to a high removal capacity. The Cd removal was slightly impacted or even improved with co-existing ions (at 50 mg/L or 200 mg/L) or HA (at 2 mg/L or 20 mg/L). Characterization results revealed that nZVI immobilized Cd through coprecipitation, surface complexation, and reduction, whereas the mechanisms for sulfidated materials involved replacement, coprecipitation, and surface complexation, with replacement as the predominant reaction. A strong linear correlation between Cd(II) removal and Fe(II) dissolution was observed, and we proposed a novel pseudo-second-order kinetic model to simulate Fe(II) dissolution.     

Simplified creation of polyester fabric supported Fe-based MOFs by an industrialized dyeing process: Conditions optimization, photocatalytics activity and polyvinyl alcohol removal

MIL-53(Fe) was successfully prepared and deposited on the surface carboxylated polyester (PET) fiber by an optimized conventional solvothermal or industrialized high temperature pressure exhaustion (HTPE) process to develop a PET fiber supported MIL-53(Fe) photocatalyst ([email protected]) for the degradation of polyvinyl alcohol (PVA) in water under light emitting diode (LED) visible irradiation. On the basis of several characterizations, [email protected] was tested for the photocalytic ability and degradation mechanism. It was found that temperature elevation significantly enhanced the formation and deposition of MIL-53(Fe) with better photocatalytic activity. However, higher temperature than 130°C was not in favor of its photocatalytic activity. Increasing the number of surface carboxyl groups of the modified PET fiber could cause a liner improvement in MIL-53(Fe) loading content and photocatalytic ability. High visible irradiation intensity also dramatically increased photocatalytic ability and PVA degradation efficiency of [email protected] Na₂S₂O₈ was used to replace H₂O₂ as electron acceptor for further promoting PVA degradation in this system. [email protected] prepared by HTPE process showed higher MIL-53(Fe) loading content and slightly lower PVA degradation efficiency than that prepared by solvothermal process at the same conditions. These findings provided a practical strategy for the large-scale production of the supported MIL-53(Fe) as a photocatalyst in the future.