Effects of WOx modification on the activity, adsorption and redox properties of CeO2 catalyst for NOx reduction with ammonia

A series of WO₃/CeO₂ (WOx/CeO₂) catalysts were synthesized by wet impregnation of ammonium metatungstate on a CeO₂ support. The resulting solid acid catalysts were characterized by X-ray diffraction (XRD), UV-Vis spectroscopy (UV-Vis), Raman spectroscopy (Raman), in-situ Fourier transform infrared spectroscopy (in-situ FT-IR) of ammonia adsorption, NH₃-TPD, H₂ temperature-programmed reduction (H₂-TPR), NH₃/NO oxidation and activity measurements for NOx reduction by NH₃ (NH₃-SCR). The results show that polytungstate (WOx) species are the main species of tungsten oxide on the surface of ceria. The addition of tungsten oxide enhances the Brönsted acidity of ceria catalysts remarkably and decreases the amount of surface oxygen on ceria, with strong interaction between CeO₂ and WOx. As a result, the N₂ selectivity of NH₃ oxidation and NH₃-SCR at high temperatures (> 300℃) is enhanced. Therefore, a wide working temperature window in which NOx conversion exceeds 80% (NOx conversion > 80%) from 200 to 450℃, is achieved over 10 wt.% WOx/CeO₂ catalyst. A tentative model of the NH₃-SCR reaction route on WOx/CeO₂ catalysts is presented.     

Effect of CeO2 and Al2O3 on the activity of Pd/Co_3O_4/cordierite catalyst in the three-way catalysis reactions (CO/NO/CnHm)

The present article studies the effect of CeO₂ and Al₂O₃ on the activity of Pd/Co₃O₄/cordierite catalyst in conversion of NO, CO, C_nH_m. The catalysts were characterized by temperature programmed reduction with hydrogen, X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy. It is shown that the effect of CeO₂ on the properties of Pd/Co₃O₄/cordierite catalyst depends on preparation method. The catalyst obtained by co-deposition of cerium and cobalt oxides has higher activity in CO oxidation (CO + O₂ and CO + NO) and total hexane oxidation (C₆H₁₄ + O₂). Such phenomenon is probably caused by more than stoichiometric amount of formed oxygen vacancies, an increase in both mobility of surface oxygen and dispersity of components in the catalytic composition. It is demonstrated that CeO₂ addition promotes the SO₂ resistance of Pd/Co₃O₄/cordierite. The second support decreases the activity of Pd/Co₃O₄/cordierite catalyst in the reactions of CO and C₆H₁₄ with oxygen because of CoAl₂O₄ formation.     

Aminobenzenesulfonamide functionalized SBA-15 nanoporous molecular sieve: A new and promising adsorbent for preconcentration of lead and copper ions

A rapid method for the extraction and monitoring of nanogram level of Pb²⁺ and Cu²⁺ ions using uniform silanized mesopor (SBA-15) functionalized with aminobenzenesulfonamide groups and flame atomic absorption spectrometry (FAAS) is presented. Aminobenzenesulfonamide functionalized SBA-15 was synthesized according to procedure in the literature and the presence of organic groups in the silica framework was demonstrated by FT-IR spectra. The functionalized product showed the BET surface area 110 m²/g and pore diameter 5.1 nm, based on adsorption-desorption of N₂ at 77 K. The effect of several variables such as (amount of adsorbent, stirring time, pH and presence of other ions in the medium) has been studied. Lead and copper were completely extracted at pH greater than 3 after stirring for 10 min. The maximum capacity of the adsorbent was found to be 191.3 ± 1.4 and 155.0 ± 1.0 μg of lead and copper ions/mg functionalized SBA-15, respectively. The preconcentration factor of the method was found to be 200. The detection limit of the technique was 3.4 and 0.4 ng/mL for Pb²⁺ and Cu²⁺, respectively. The applications of this methodology for real samples were examined by various water type, black tea and pepper samples.     

沸石负载介孔TiO_2的制备及其可见光催化性能研究

以人工沸石为载体,采用溶胶-凝胶法,制备出了沸石负载介孔改性TiO2光催化剂。以亚甲基蓝为目标污染物,研究了不同掺杂金属及介孔薄膜制备方法对纳米TiO2可见光催化性能的影响。用扫描电镜(SEM)、紫外-可见吸收光谱(UV-vis)等手段研究了掺杂改性前后TiO2的变化。研究发现,N-Fe掺杂可使催化剂的光吸收谱带红移。当掺杂Fe的比为0.2%,焙烧温度为500℃时制备的TiO2效果最好,在可见光照射2 h后,亚甲基蓝的去除率可达90%。研究表明经十六烷基三甲基溴化铵(CTAB)作为模板剂修饰后的TiO2催化效果有明显提高,通过将经过萃取去除模板剂的共掺TiO2和直接高温焙烧的TiO2对比后发现,前者比后者降解亚甲基蓝的效果要好,原因在于,高温直接焙烧去除模板剂很容易使模板剂形成的骨架塌陷,减小了比表面积,从而影响了其光催化性能。     

改性甘蔗渣对Pb~(2+)、Cd~(2+)的吸附行为研究

为提高废弃甘蔗渣对重金属离子Cd2+和Pb2+的吸附能力,文章采用简单的方法制备了乙二胺四乙酸二酐(EDTAD)修饰的甘蔗渣。经FTIR分析,有大量的羰基修饰在了甘蔗渣的表面,为其吸附重金属离子提供了更多的活性位点。实验结果表明:经过修饰后的甘蔗渣对Cd2+和Pb2+的吸附量分别为46.46 mg/g、119.36 mg/g,是未修饰的3.69和12.31倍,且均能在20 min内达到最大吸附量并保持平衡,其吸附符合Langmuir等温吸附模型,且吸附过程遵循二级动力学模型。在pH 4~7范围内,修饰SCB对Cd2+和Pb2+具有较高的吸附能力。除此之外,在Cd2+、Pb2+、Cu2+和Zn2+共存的情况下,修饰SCB对Pb2+仍能保持较高的吸附量。修饰后的甘蔗渣对Cd2+和Pb2+的吸附能力有了显著提高,且具有一定的抗干扰能力,有望应用于实际工业废水处理。     

近期已实施及将实施的部分国家环境标准

<正>HJ 618—2011《环境空气PM10和PM2.5的测定重量法》、HJ 620—2011《水质挥发性卤代烃的测定顶空气相色谱法》、HJ 621—2011《水质氯苯类化合物的测定气相色谱法》、HJ 629—2011《固定污染源废气二氧化硫的测定非分散红外吸收法》、HJ 630—2011《环境监测质量管理技术导则》已于2011年11月1日起实施。GB 27631-2011《发酵酒精和白酒工业水污染物排放标准》、GB 27632-2011《橡胶制品工业污染     

铝钛改性MCM-41材料对污水中铅镉的吸附研究

研究了改性MCM-41材料对污水中重金属铅、镉离子的吸附行为。在MCM-41材料中加入Al、Ti两种诱因金属离子来合成新的Al-Ti-MCM-41及Ti-Al-MCM-41改性材料,通过氮气吸附-脱附等温线对Al-Ti-MCM-41(Al/Ti=1∶1)及Al-Ti-MCM-41(Al/Ti=2∶1)样品进行了表征,并采用改性后的MCM-41材料为吸附剂对含有二价铅、镉离子的溶液进行吸附实验,考察了吸附剂投加量,Pb2+、Cd2+初始质量浓度和吸附温度对吸附的影响。结果表明:改性Al-Ti-MCM-41(Al/Ti=1∶1)材料的最可几孔径和比孔容分别为16.68 nm和0.046 cm3/g,由BJH计算得到的平均孔径为17.02 nm;Al-Ti-MCM-41(Al/Ti=2∶1)的最可几孔径和比孔容分别为16.88 nm和0.083 cm3/g,由BJH计算得到的平均孔径为17.08 nm。Al-Ti-MCM-41(Al/Ti=1∶1)对Cd2+的吸附率为99.8%;Al-Ti-MCM-41(Al/Ti=2∶1)对Pb2+的吸附率为99.96%;Pb2+和Cd2+的吸附容量随吸附剂投加量的增加而降低,随离子初始浓度的增大而增加;温度越高越有利于吸附。该研究重点考察改性MCM-41材料在重金属铅镉离子污染治理中的性能,从而为解决重金属铅镉的污染,加强环境保护提供理论支撑和技术支持,具有明确的现实意义。     

纳米TiO_2纤维的制备及其光催化降解甲醛研究

以胶原纤维为模板制备纳米TiO2纤维用于光助催化降解甲醛气体,用扫描电镜(SEM)、X射线衍射(XRD)和N2吸附-脱附技术对纳米TiO2纤维进行了表征。结果表明,纳米TiO2纤维的比表面积为11.33 m2/g,晶型为锐钛矿型。在相同催化反应条件下纳米TiO2纤维对甲醛气体的催化降解率与商品纳米TiO(2Degussa P25)催化剂相当。纳米TiO2纤维的用量、甲醛气体初始浓度是影响催化效果的两个因素。当甲醛气体初始浓度为0.270 mg/m3,相对湿度为38%,气体流速0.1 L/min,纳米TiO2纤维用量为1.0 g时,甲醛的降解率达到96%。因此,纳米TiO2纤维可用于室内甲醛气体的催化降解。     

有机粘土疏水性吸附过程的分子模拟:烷基碳原子数和有机物logK_(ow)的影响

基于从分子尺度上解析改性剂烷基碳原子数和有机物疏水性对有机粘土吸附能力的影响机制,以从头算的量子化学计算方法(MP2/6-31g(d))模拟了有机粘土在水溶液中的吸附过程.通过计算吸附前后几何构型、能量、化学键和电荷分布等参数的变化,分析了影响有机粘土疏水性吸附的关键因素,并对疏水性吸附作用力的化学本质进行了初步探讨.计算结果表明,烷基碳原子数增加对提高有机物吸附能的作用并不显著,长链烷基提高有机粘土吸附容量的真正原因在于其可提供更多的有机物吸附位.有机物的疏水性(以正辛醇-水分配系数logKow表征)是影响疏水性吸附过程的关键因子,水分子的引力作用对疏水性吸附具有决定性影响,理论上解释了普遍存在的有机物吸附量与logKow呈正相关的实验现象.疏水性吸附力的作用前提是有机物为疏水性,即当水分子的引力作用较弱时疏水性作用力才可以表现出来;而对于亲水性有机物,疏水性吸附力会被水分子的引力所抵消,吸附强度减弱.模拟红外光谱和电荷分布结果表明,吸附前后无化学键断裂和电子得失的发生,只有原子电荷密度的微小变化,据此推测疏水性吸附力以分子间弱相互作用力——London色散力为主.     

Absorption characteristics of new solvent based on a blend of AMP and 1,8-diamino-p-menthane for CO2 absorption

Aqueous 1,8-diamino-p-menthane (KIER-C3) and commercially available amine solutions were tested for CO₂ absorption. A 2-amino- 2-methyl-1-propanol (AMP) solution with an addition of KIER-C3 showed 9.3% and 31.6% higher absorption rate for CO₂ than the AMP solution with an addition of monoethanolamine (MEA) and ammonia (NH₃), respectively. The reaction rate constant for CO₂ absorption by the AMP/KIER-C3 solution was determined by the following equation: k_2,AMP/C3 = 7.702×10⁶ exp (-2248.03/T). A CO₂ loading ratio of the AMP/KIER-C3 solution was also 2 and 3.4-times higher than that of the AMP/NH3 solution and the AMP/MEA solution, respectively. Based on the experimental results, KIER-C3 may be used as an excellent additive to increase CO₂ absorption capability of AMP.