三维场量的等值线生成算法

提出了一种八节点六面体单元的三维场量等值线生成方法。经实例验证 ,该三维场量等值线生成方法是合理、有效的     

矿井水中微量油测试的几个问题探讨

矿井水中的油由于含量较低且水质特殊，一般较难测准。本文提出了在测试矿井水中微量油时存在的一些问题，如分析方法的选择、标准油、空白水样及水中悬浮物对测试结果的影响等，并提出了解决这些问题的措施。     

理论COD与重铬酸钾法实测COD的关系

本文探讨有机化合物理论化学需氧量的涵义，有机物各组成元素氧化达到最高氧化值应是ＴｈＯＤ的计算基础。重铬酸钾法实测化学需氧量，对结构较简单的有机物接近ＴｈＯＤ，对结构复杂的有机物，ＣＯＤｃｒ只达到ＴｈＯＤ的９０％或更低一些。     

三维有限元模拟中的网格重划

详细论述了网格重划技术的判断准则、新旧网格之间场量传递等 ,提出了两种进行包含测试的新方法交点判断法和矢量判断法 ,并成功地应用于新旧网格之间三维场量的传递。实例应用验证了该方法的正确性和有效性。     

水源水中摇蚊幼虫的孳生与生态控制

摇蚊幼虫（红虫）在城市供水系统中的出现，成为困扰水厂正常生产运行的又一水处理难题。首先对其生理特性与环境因子之间的关系进行了论述，然后从生态学角度出发，利用生态群落中的食物链关系，分析了富营养化水体中摇蚊幼虫大量孳生的原因。在此基础上提出了利用合理的生物操纵技术，通过鱼类与水生生物间的“下行效应”，以达到恢复生态平衡并控制摇蚊幼虫孳生为目的的生态治理方案。     

毒死蜱、二嗪磷等6种农药对鸟类的环境风险评估

应用现有的评估方法,对毒死蜱、二嗪磷、乐果、吡虫啉、抗蚜威和灭多威6种农药对鸟类的风险进行评估,评估结果表明,经食途径,乐果、毒死蜱和二嗪磷对鸟类的初级急性、短期和长期风险均不可接受;吡虫啉对鸟类的初级急性和长期风险不可接受;抗蚜威和灭多威对鸟类的初级急性风险不可接受,对鸟类的初级短期和长期风险可接受.通过饮水途径,只有毒死蜱对鸟类的急性风险无需关注,其他农药品种对鸟类的急、慢性风险均需关注.吡虫啉、毒死蜱、二嗪磷和灭多威4种农药通过喷雾液滴吸入途径对鸟类产生的风险需要引起关注,乐果和抗蚜威通过喷雾液滴吸入途径对鸟类产生的风险无需关注;6种农药通过挥发相吸入途径对鸟类产生的风险均无需关注.评估结果可为6种农药的安全使用和的环境安全管理提供科学参考,同时对我国现有评估指南的完善提出了建议.     

Comparison of fatty acid profile in the chicken meat after feeding with narasin,nicarbazin and salinomycin sodium and phyto-additive substances

The purpose of this study was an experimental investigation and a statistical evaluation of the influence of various additives in feed mixtures of broiler chickens on fatty acids content and their ratio in breast and thigh muscles. First feed additive consisted of narasin, nicarbasin and salinomycin sodium, and other five additives were of phytogenic origin. In vivo experiment was realized on the poultry experimental station with deep litter breeding system. A total of 300 one-day-old hybrid chickens Cobb 500 divided into six groups were used for the experiment. The experimental period was divided into four phases, i.e. Starter, Grower 1, Grower 2 and Final, according to the application of commercial feed mixture of soy cereal type. Additive substances used in feed mixtures were different for each group. Basic feed mixtures were equal for all groups. Fatty acid profile of breast and thigh muscles was measured by the method of FT IR Nicolet 6700. Investigated additive substances in the feed mixtures did not have statistically significant effect on fatty acid content and omega-6/omega-3 polyunsaturated fatty acid (PUFA) ratio in breast and thigh muscles. Strong statistically significant relation between omega-6 PUFAs and total PUFAs were proved by experiment. A relation between omega-3 PUFAs and total PUFAs was found only in the group with Biocitro additive.     

Carbon dioxide mineralization process design and evaluation: concepts,case studies,and considerations

Numerous carbon dioxide mineralization (CM) processes have been proposed to overcome the slow rate of natural weathering of silicate minerals. Ten of these proposals are mentioned in this article. The proposals are described in terms of the four major areas relating to CM process design: pre-treatment, purification, carbonation, and reagent recycling operations. Any known specifics based on probable or representative operating and reaction conditions are listed, and basic analysis of the strengths and shortcomings associated with the individual process designs are given in this article. The processes typically employ physical or chemical pseudo-catalytic methods to enhance the rate of carbon dioxide mineralization; however, both methods have its own associated advantages and problems. To examine the feasibility of a CM process, three key aspects should be included in the evaluation criteria: energy use, operational considerations as well as product value and economics. Recommendations regarding the optimal level of emphasis and implementation of measures to control these aspects are given, and these will depend very much on the desired process objectives. Ultimately, a mix-and-match approach to process design might be required to provide viable and economic proposals for CM processes.     

Biodegradable Polymers from 5-Hydroxylevulinic Acid: 1. Synthesis and Characterization of Poly(5-hydroxylevulinic acid)

As an attempt to synthesize new biodegradable polymers from renewable cellulose resources, melt polycondensation of 5-hydroxylevulinic acid (5-HLA) was reported for the first time. The resulting product, poly(5-hydroxylevulinic acid) (PHLA), was synthesized and characterized with GPC, FTIR, ¹H NMR and DSC. The in vitro degradation behaviors in phosphate-buffered saline (PBS) and in deionized water (DW) were also examined. The molecular weight of PHLA is not high (several 1,000s), but it possesses unordinary high glass transition temperature (as high as 120 °C). This is very different from existing aliphatic polyesters that usually have T _gs lower than 60 °C. The high T _g is attributed to the formation of inter- and/or intramolecular hydrogen bonds due to a characteristic keto–enol tautomerism equilibrium in the polymer structure. PHLA readily degraded hydrolytically in aqueous media.     

杭州市暴雨洪涝灾害风险区划

暴雨洪涝灾害是一个多因素耦合的复杂系统,在自然灾害系统理论基础上,根据杭州市1959～2009年的降水资料、自然环境以及社会经济要素,综合致灾因子、孕灾环境、承灾体以及防灾减灾能力,构建区域暴雨洪涝灾害风险评价模型。考虑到降水、地形、水系以及GDP和耕地等因子,通过ArcGIS空间分析技术结合模糊综合评价法,编制以100m×100m栅格为基本评价单元的杭州市暴雨洪涝灾害风险区划图。区划结果表明杭州暴雨洪涝风险东北部高于西南部。杭州暴雨洪涝风险高值区主要在杭州市区、余杭区、临安市、富阳市和桐庐县的富春江流域、淳安千岛湖西南部地区。暴雨洪涝风险高值区主要集中在山谷、河边、江边、人口密集地区等区域。