Heavy metals in water and in tissues of himri (Carasobarbus luteus) from Orontes (Asi) River, Turkey

Concentrations of heavy metals (Ag, Cd, Cr, Cu, Fe, Ni, Pb ve Zn) were measured in running water and in tissues (muscle, liver, gill, skin and gonads) of one commercially valuable fish species (Carasobarbus luteus) from the Orontes (Asi) River (Güzelburç region) in Hatay (Southeastern Turkey). Results for levels in water compared with national and international water quality guidelines were found at the highest concentrations in international criteria’s WHO, EC and EPA, but Cd, Cu, Ni and Pb were found to exceed permissible level of drinking water in national criteria TSE-266 whereas Fe, Zn and Cr concentrations were within the permissible levels for drinking. The present study showed a significant seasonal variation (p?p?>?0.05), which showed seasonal variation of only Zn (p?C. luteus were below the permissible limit for human consumption, level of Cu being very close to the permissible limit. Consequently, continuous monitoring of heavy metal concentration in edible freshwater fish will be needed in Orontes River.     

Heavy metal pollution in surface sediment and mussel samples in the Gulf of Gemlik

Different sources of pollution in Karasu Creek were investigated to obtain the water quality and ratio of contamination in this region. To achieve the main objectives of the present study, water samples were collected from Karasu Creek, starting from flow pattern at the upstream site of Akkaya Dam to the end of the dam, crossing the place where the Creek drains into. Dissolved oxygen, electrical conductivity, temperature and maximum/minimum pH were measured systematically for 12 months in the stations, where the water samples were collected. Chemical analyses of the water samples were carried out by using Cadas 50 S brand UV spectrometer to find out the Pb, Fe, Cu, Zn, Ni, Cr, Cd, S, F and Cn concentrations. These concentration were determined in μg/lt as 80–850; 180–4,920; 10–6,100; 440–25,530; 130–2,400; 120–280; 20–150; 214,250–1,113,580; 1,560–4,270 and 40–690, respectively. To determine metal levels of the water samples, multivariate analyses (element coefficient correlation, coefficient correlation dendrogram, hierarchical cluster analysis dendrogram, model summary and ANOVA) were used. The analyses yielded highly accurate results. There were positive correlations between some elements and their possible sources were the same. The stations which resembled each other along the creek were divided into three groups. The water quality of the creek was low and had toxic qualities. Eutrophication developed in Akkaya Dam along the creek. The source of pollution was thought to be industrial and residential wastes. Absolute (0–100 m), short distance (100–500 m) and medium distance (500–2,000 m) conservation areas should be determined in pollution areas along Karasu Creek and they should be improved.     

Analysing and mapping spatial and temporal dynamics of urban traffic noise pollution: a case study in Kahramanmaraş, Turkey

This study aimed at quantifying noise pollution from urban traffic in the city of Kahramanmara?, Turkey. A total of 114 measurements for the equivalent noise level (L _Aeq) were made at 38 urban locations classified as “residential areas”, “residential and commercial areas” and “industrial areas” according to the national regulations, during morning, mid-day and evening hours. Our findings tabulated and mapped revealed that mean noise level in “residential and commercial areas” was highest relative to the other land-use types. Minimum and maximum values of noise pollution were recorded during the mid-day and evening hours, regardless of the land-use types. Noise limit values were exceeded at two locations only out of 38 based on the national regulation criteria and at over half of the locations based on the international criteria.     

Genotoxic effects of water pollution on two fish species living in Karasu River,Erzurum, Turkey

Karasu River, which is the only river in the Erzurum plain, is the source of the Euphrates River (Eastern Anatolia of Turkey). The river is in a serious environmental situation as a result of pollution by agricultural and industrial sewage and domestic discharges. The present study aims to evaluate genotoxic effects of toxic metals in chub, Leuciscus cephalus, and transcaucasian barb, Capoeta capoeta, collected from contaminated site of the Karasu River, in comparison with fish from an unpolluted reference site. Heavy metal concentrations in surface water of the river were determined. The condition factor (CF) was taken as a general biomarker of the health of the fish, and genotoxicity assays such as micronucleus (MN) and other nuclear abnormalities (NA) were carried out on the fish species studied. MN and NA such as kidney-shaped nucleus, notched nucleus, binucleated, lobed nucleus, and blebbed nucleus were assessed in peripheral blood erythrocytes, gill epithelial cells, and liver cells of the fish. A significant decrease in CF values associated with a significant elevation in MN and NA frequencies was observed in fish collected from the polluted sites compared with those from the reference site. Results of the current study show the significance of integrating a set of biomarkers to identify the effects of anthropogenic pollution. High concentrations of heavy metals have a potential genotoxic effects, and the toxicity is possibly related to industrial, agricultural, and domestic activities.     

Effects of life‐history requirements on the distribution of a threatened reptile

Survival and reproduction are the two primary life‐history traits essential for species’ persistence; however, the environmental conditions that support each of these traits may not be the same. Despite this, reproductive requirements are seldom considered when estimating species’ potential distributions. We sought to examine potentially limiting environmental factors influencing the distribution of an oviparous reptile of conservation concern with respect to the species’ survival and reproduction and to assess the implications of the species’ predicted climatic constraints on current conservation practices. We used ecological niche modeling to predict the probability of environmental suitability for the alligator snapping turtle (Macrochelys temminckii). We built an annual climate model to examine survival and a nesting climate model to examine reproduction. We combined incubation temperature requirements, products of modeled soil temperature data, and our estimated distributions to determine whether embryonic development constrained the northern distribution of the species. Low annual precipitation constrained the western distribution of alligator snapping turtles, whereas the northern distribution was constrained by thermal requirements during embryonic development. Only a portion of the geographic range predicted to have a high probability of suitability for alligator snapping turtle survival was estimated to be capable of supporting successful embryonic development. Historic occurrence records suggest adult alligator snapping turtles can survive in regions with colder climes than those associated with consistent and successful production of offspring. Estimated egg‐incubation requirements indicated that current reintroductions at the northern edge of the species’ range are within reproductively viable environmental conditions. Our results highlight the importance of considering survival and reproduction when estimating species’ ecological niches, implicating conservation plans, and benefits of incorporating physiological data when evaluating species’ distributions.     

Influence of different processing techniques on the mechanical properties of used tires in embankment construction

Use of the processed used tires in embankment construction is becoming an accepted way of beneficially recycling scrap tires due to shortages of natural mineral resources and increasing waste disposal costs. Using these used tires in construction requires an awareness of the properties and the limitations associated with their use. The main objective of this paper is to assess the different processing techniques on the mechanical properties of used tires–sand mixtures to improve the engineering properties of the available soil. In the first part, a literature study on the mechanical properties of the processed used tires such as tire shreds, tire chips, tire buffings and their mixtures with sand are summarized. In the second part, large-scale direct shear tests are performed to evaluate shear strength of tire crumb–sand mixtures where information is not readily available in the literature. The test results with tire crumb were compared with the other processed used tire–sand mixtures. Sand–used tire mixtures have higher shear strength than that of the sand alone and the shear strength parameters depend on the processing conditions of used tires. Three factors are found to significantly affect the mechanical properties: normal stress, processing techniques, and the used tire content.     

Nitrogen concentrations in mosses indicate the spatial distribution of atmospheric nitrogen deposition in Europe

In 2005/6, nearly 3000 moss samples from (semi-)natural location across 16 European countries were collected for nitrogen analysis. The lowest total nitrogen concentrations in mosses (<0.8%) were observed in northern Finland and northern UK. The highest concentrations (≥1.6%) were found in parts of Belgium, France, Germany, Slovakia, Slovenia and Bulgaria. The asymptotic relationship between the nitrogen concentrations in mosses and EMEP modelled nitrogen deposition (averaged per 50 km × 50 km grid) across Europe showed less scatter when there were at least five moss sampling sites per grid. Factors potentially contributing to the scatter are discussed. In Switzerland, a strong (r² = 0.91) linear relationship was found between the total nitrogen concentration in mosses and measured site-specific bulk nitrogen deposition rates. The total nitrogen concentrations in mosses complement deposition measurements, helping to identify areas in Europe at risk from high nitrogen deposition at a high spatial resolution.