Sex ratio estimations of loggerhead sea turtle hatchlings by histological examination and nest temperatures at Fethiye beach, Turkey

Hatchling sex ratios in the loggerhead turtle (Caretta caretta) were estimated by placing electronic temperature recorders in 21 nests at Fethiye beach during 2000–2002. Over the seasons, the mean temperature in the middle third of the incubation period ranged from 26.7 to 32.1°C, and incubation periods ranged from 49 to 67 days. Based on the mean temperatures during the middle third of the incubation period, and on histologically sexed dead hatchlings, the sex ratios of hatchlings at Fethiye beach were roughly equal, i.e. 60–65% of the hatchlings were females. This contrasts with the highly female-skewed sex ratios in loggerhead turtles elsewhere; Fethiye has a relatively high proportion of male hatchlings. For endangered sea turtles, the knowledge of hatchling sex ratios at different beaches, coupled with appropriate conservation measures, can make an important contribution to their survival.     

Kinetic of carbonaceous substrate in an upflow anaerobic sludge sludge blanket (UASB) reactor treating 2,4 dichlorophenol (2,4 DCP)

The performance of an upflow anaerobic sludge blanket (UASB) reactor treating 2,4 dichlorophenol (2,4 DCP) was evaluated at different hydraulic retention times (HRTs) using synthetic wastewater in order to obtain the growth substrate (glucose-COD) and 2,4 DCP removal kinetics. Treatment efficiencies of the UASB reactor were investigated at different hydraulic retention times (2-20 h) corresponding to a food to mass (F/M) ratio of 1.2-1.92 g-COD g(-1) VSS day(-1). A total of 65-83% COD removal efficiencies were obtained at HRTs of 2-20 h. In all, 83% and 99% 2,4 DCP removals were achieved at the same HRTs in the UASB reactor. Conventional Monod, Grau Second-order and Modified Stover-Kincannon models were applied to determine the substrate removal kinetics of the UASB reactor. The experimental data obtained from the kinetic models showed that the Monod kinetic model is more appropriate for correlating the substrate removals compared to the other models for the UASB reactor. The maximum specific substrate utilization rate (k) (mg-COD mg(-1) SS day(-1)), half-velocity concentration (K(s)) (mg COD l(-1)), growth yield coefficient (Y) (mg mg(-1)) and bacterial decay coefficient (b) (day(-1)) were 0.954 mg-COD mg(-1) SS day(-1), 560.29 mg-COD l(-1), 0.78 mg-SS g(-1)-COD, 0.093 day(-1) in the Conventional Monod kinetic model. The second-order kinetic coefficient (k(2)) was calculated as 0.26 day(-1) in the Grau reaction kinetic model. The maximum COD removal rate constant (U(max)) and saturation value (K(B)) were calculated as 7.502 mg CODl(-1)day(-1) and 34.56 mg l(-1)day(-1) in the Modified Stover-Kincannon Model. The (k)(mg-2,4 DCP mg(-1) SS day(-1)), (K(s)) (mg 2,4 DCPl(-1)), (Y) (mg SS mg(-1) 2,4 DCP) and (k(d)) (day(-1)) were 0.0041 mg-2,4 DCP mg(-1) SS day(-1), 2.06 mg-COD l(-1), 0.0017 mg-SS mg(-1) 2,4 DCP and 3.1 x 10(-5) day(-1) in the Conventional Monod kinetic model for 2,4 DCP degradation. The second-order kinetic coefficient (k(2)) was calculated as 0.30 day(-1) in the Grau reaction kinetic model. The maximum 2,4 DCP removal rate constant (U(max)) and saturation value (K(B)) were calculated as 0.01 mg COD l(-1) day(-1) and 9.8 x 10(-3) mg l(-1) day(-1) in the Modified Stover-Kincannon model.     

Treatment of Basic Red 29 dye solution using iron-aluminum electrode pairs by electrocoagulation and electro-Fenton methods

The aim of this study is the treatment of Basic Red 29 (BR29) dye solution using hybrid iron-aluminum electrodes by electrocoagulation and electro-Fenton methods. The effect of current density, initial pH, supporting electrolyte, H₂O₂, and initial dye concentration on dye removal efficiency was investigated, and the best experimental conditions were obtained. Time-coarse variation of UV-Vis spectra and toxicity and chemical oxygen demand (COD) removal were also examined at the best experimental conditions. Both systems were found very successful for the removal of BR29 dye. The removal efficiency of >95 % for BR29 dye solution was reached easily in a short time. At the best experimental conditions, for the initial BR29 concentration of 100 mg/L, >95 % BR29 dye and 71.43 % COD removal were obtained after 20 and 40 min of electrolysis, respectively. Additionally, toxicity results for electro-Fenton treatment of 100 mg/L BR29 were also very promising. According to the results obtained, although electro-Fenton is more effective, both systems can be used successfully to treat textile wastewater including dyes.     

Spatial and temporal dynamics of land use pattern in Eastern Turkey: a case study in Gümüşhane

Recognition and understanding of landscape dynamics as a historical legacy of disturbances are necessary for sustainable management of forest ecosystems. This study analyzed spatial and temporal changes in land use and land cover patterns in a typical mountain watershed in the Gumushane district along the Northeastern part of Turkey. The area is investigated by comparing LANDSAT images from 1987 to 2000 and evaluated the temporal changes of spatial structure of forest conditions through spatial analysis of forest cover type maps from 1971 and 1987 using GIS and FRAGSTATS™. The results show a general decreasing trend in area of natural land cover types including broadleaf and conifer forests as well as coppice between 1971 and 1987 (0.54%, respectively). In contrast, between 1987 and 2000 this natural land cover types show increasing trend (1.6%). In parallel with forest dynamics, the area of managed land including lowland and upland agricultural areas, rangelands and grasslands increased during the first period and decreased during second period. In terms of spatial configuration, Gümüşhane forests aren’t generally fragmented by intensive forest utilization in the latter periods. This is partially due to out-migration of rural population in Gümüşhane. Nevertheless, land use pattern significantly changed over time depending on a few factors such as unregulated management actions, social pressure and demographic movements. The study revealed that demographic movements have a major effect on landscape dynamics.     

Accumulation of Tobacco mosaic virus (TMV) at different depths clay and loamy sand textural soils due to tobacco waste application

The effects of tobacco waste (TW) application to the soil surface on the accumulation of Tobacco mosaic virus (TMV) in clay and loamy sand textural soils at various depths were investigated in two different fields. The tobacco waste had been found to be infected with TMV. Eighteen months after TW application to the soil surface, soils were sampled at 20 cm intervals through to 80 cm depth. The DAS-ELISA method was performed to determine infection of soil with TMV. The viruses persisted in clay soil for a long period compared with loamy sand soil. There was no accumulation of TMV at any depth of loamy sand soil in Experimental Field 2. TMV adsorption to soil particles in 0-60 cm depth of clay soil was determined in all TW treatments in Experimental Field 1. The highest ELISA Absorbance (A405) values in all treatments were determined in the 20-40 cm soil depth that had the highest clay content. ELISA A405 values of TMV at different depths of clay soil gave significant correlations with clay content (r = 0.793**), EC values (r = 0.421**) and soil pH (r = -0.405**). Adsorption of TMV to net negatively charged clay particle surfaces increased with increasing EC values of soil solution. Decreasing soil pH and infiltration rate increased adsorption of TMV to clay particles. Higher infiltration rate and lower clay content in loamy sand soil caused leaching of TMV from the soil profile.     

A comparative study for the sorption of Cd(II) by K-feldspar and sepiolite as soil components, and the recovery of Cd(II) using rhamnolipid biosurfactant

This study investigated the sorption characteristics and recovery of selected heavy metal Cd(II) from K-feldspar and sepiolite, representative soil components, using rhamnolipid biosurfactant. Although the proposed technique was classified as a soil bioremediation process, it can also be applied to treatment of waste waters containing Cd(II) ions with minor modifications. The effect of initial Cd(II) concentration on sorption capacity was characterized by determining the sorption isotherms. Of the four models examined, the Freundlich model showed the best fit for the sorption of Cd(II) on K-feldspar, whereas the Langmuir-model was used successfully to characterize the sorption of Cd(II) on sepiolite. Although a high Cd(II) uptake of 7.49 mmol/kg by K-feldspar was obtained, sepiolite was a superior Cd(II) accumulater, with a maximum Cd(II) uptake of 24.66 mmol Cd(II)/kg. The presence of Cd(II) in the sepiolite or K-feldspar prior to addition of the rhamnolipid generally resulted in less rhamnolipid sorption to sepiolite or K-feldspar. The maximum Cd(II) desorption efficiency by rhamnolipid from K-feldspar was substantially higher than that of sepiolite and determined to be 96% of the sorbed Cd(II), whereas only 10.1% of the sorbed Cd(II) from sepiolite was recovered by rhamnolipid solution.     

Assessment of heavy metal levels in sediment samples of Kapulukaya Dam Lake (Kirikkale) and lower catchment area

In this study, the concentrations of 13 elements (Al, Fe, Mn, Cr, Ni, Zn, Co, As, Pb, Cu, Mo, Hg, and Cd) were determined in the sediments of three different sites in the Kapulukaya Dam Lake between May 2007 and November 2008. They ranged from 1.47 to 4.64 for Al, 0.92 to 3.48 for Fe (in percent), 326.60 to 1053.00 for Mn, 98.00 to 1,116.00 for Cr, 24.70 to 127.10 for Ni, 14.80 to 124.20 for Zn, 11.0 to 43.20 for Co, 5.00 to 29.30 for Cu, 9.10 to 69.70 for As, 8.60 to 34.00 for Pb, 2.50 to 5.20 for Mo, 1.00 to 1.60 for Hg, and 0.50 to1.80 for Cd in microgram per gram dry weight sediment. The contamination degree of the sediment was assessed on the basis of enrichment factor and corresponding sediment quality guideline. The calculated enrichment factors (EF, measured metal vs. background concentrations) indicated that the effect of man-made activities on the occurrence of concentrations could be accounted for the majority of heavy metals namely Mn, As, Ni, Cu, Zn, Cr, Co, Mo, and Cd, whereas such affect was not detected for Hg and Pb. The maximum values of the EF were represented by As, minimum values by Hg at all sites. Mean EF values were 36.60 and 0.70 for As and Hg, respectively. This study has clearly assessed a certain level of heavy metal pollution in the region, based particularly on the findings from sediment.     

安钢推行清洁生产的几点措施

在指出转变观念的基础上,介绍了安钢“九五”以来发展过程中推行清洁生产的主要举措;并通过“九五”末和2002年能耗与环保指标对比,说明清洁生产的经济性、科学性。进而提出大力推行清洁生产是企业生存发展的必然选择。     

基于自回归GA-BP神经网络的AQI预测

基于徐州市2013年12月—2018年11月的空气质量指数日均值,建立了时间序列自回归输入的GA-BP神经网络模型用于空气质量指数预测。结果表明,所建立的网络模型能够准确预测徐州市空气质量指数的变化趋势,其中夏季预测相对误差18. 23%,仿真均方根误差(RMSE)为14. 59;冬季预测相对误差9. 14%,仿真RMSE为11. 47。     

楔块锁紧冲头压铆模的设计

通过对组件锁柱的工艺分析,确定了冲床压铆的可行性;介绍了斜楔锁紧冲头压铆模的工作过程和特点.