Modeling of Cr contamination in the agricultural lands of three villages near the leather industry in Kasur,Pakistan, using statistical and GIS techniques

Kasur is one of the hubs of leather industry in the Punjab, Pakistan, where chrome tanning method of leather processing is extensively being used. Chromium (Cr) accumulation levels in the irrigation water, soil, and seasonal vegetables were studied in three villages located in the vicinity of wastewater treatment plant and solid waste dumping site operated by the Kasur Tanneries Waste Management Agency (KTWMA). The data was interpreted using analysis of variance (ANOVA), clustering analysis (CA), and principal component analysis (PCA). Interpolated surface maps for Cr were generated using the actual data obtained for the 30 sampling sites in each of the three villages for irrigation water, soil, and seasonal vegetables. The level of contamination in the three villages was directly proportional to their distance from KTWMA wastewater treatment plant and the direction of water runoff. The highest level of Cr contamination in soil (mg kg^?1) was observed at Faqeeria Wala (37.67), intermediate at Dollay Wala (30.33), and the least in Maan (25.16). A gradational variation in Cr accumulation was observed in the three villages from contaminated wastewater having the least contamination level (2.02–4.40 mg L^?1), to soil (25.16–37.67 mg kg^?1), and ultimately in the seasonal vegetable crops (156.67–248.33 mg kg^?1) cultivated in the region, having the highest level of Cr contamination above the permissible limit. The model used not only predicted the current situation of Cr contamination in the three villages but also indicated the trend of magnification of Cr contamination from irrigation water to soil and to the base of the food chain. Among the multiple causes of Cr contamination of vegetables, soil irrigation with contaminated groundwater was observed to be the dominant one.     

Ecological footprint: an indicator of environmental sustainability of a surface coal mine

Ecological footprint of mining can be used as an indicator to monitor and regulate mining operations and ensure long-term environmental sustainability. It can be viewed as a mining footprint, which is surrogate of the environmental impacts of mining. In this paper, a methodological framework is developed to demonstrate how ecological footprint can be used as an indicator of environmental degradation. Nine air quality and 26 soil quality samples are collected from the adjoining area of a mechanized coal mine, located in Raniganj coal mining belt of Burdwan district, West Bengal. Geographical information system is used for data interpolation and preparation of air and soil quality maps. The weights of different air and soil quality parameters are calculated by running principal component analysis. These derived weights are used for preparation of final composite air and soil quality maps. The composite maps show the mining footprints, expressed as land equivalent, around the active mine sites. The impact zones reveal the extent of degradation of the soil and air qualities in the areas near a mine. It is found that the impact zones, with respect to air and soil qualities, extend over areas which are 7.7 and 7.8 times the actual mining areas, that is, the area covered under mining operations, respectively. The results show the extent of degradation of air and soil qualities of the area. At different stages of mining, these footprints can be used as indicators to reveal the areas where soil and air qualities are adversely impacted.     

Sustainable cooking energy options for rural poor people in India: an empirical study

Currently, energy consumption for cooking in rural households of India is mostly based on fuelwood used in traditional stoves. This paper presents results of a study carried out in a forest fringe area of India on cooking energy use. The concept of calculating levelized cost as cost per unit of useful energy is applied on source–device combinations of cooking and validated in Bargaon Community Development Block of Sundergarh District in Odisha, India. About 92 % of the households in the study area use fuelwood as the only energy source for cooking; the total use of fuelwood for only cooking, in the Block is nearly 1.8 times the total sustainable wood supply showing an urgent need for promoting alternative cooking energy options. This paper also presents an assessment of different cooking options in terms of cost per unit of useful cooking energy. LPG, biogas and gasifier stoves are found to be far too expensive for the local people. Briquette-fired improved stoves appear to be a promising cooking energy option in the study area. Government support and intervention are recommended for promoting this option.     

Locating Spatial Variation in the Association Between Wildland Fire Risk and Social Vulnerability Across Six Southern States

Wildland fire in the South commands considerable attention, given the expanding wildland urban interface (WUI) across the region. Much of this growth is propelled by higher income retirees and others desiring natural amenity residential settings. However, population growth in the WUI increases the likelihood of wildfire fire ignition caused by people, as humans account for 93% of all wildfires fires in the South. Coexisting with newly arrived, affluent WUI populations are working class, poor or otherwise socially vulnerable populations. The latter groups typically experience greater losses from environmental disasters such as wildfire because lower income residents are less likely to have established mitigation programs in place to help absorb loss. We use geographically weighted regression to examine spatial variation in the association between social vulnerability (SOVUL) and wildfire risk. In doing so, we identify “hot spots” or geographical clusters where SOVUL varies positively with wildfire risk across six Southern states—Alabama, Arkansas, Florida, Georgia, Mississippi, and South Carolina. These clusters may or may not be located in the WUI. These hot spots are most prevalent in South Carolina and Florida. Identification of these population clusters can aid wildfire managers in deciding which communities to prioritize for mitigation programming.     

Impact of PAH on biological health parameters of soils of an Indian refinery and adjoining agricultural area—a case study

The present study is aimed at analysing and comparing different soil enzymes in soil samples of native contaminated sites of a Mathura refinery and adjoining agricultural land. Enzyme activities are considered as indicators of soil quality and changes in biogeochemical function due to management or perturbations. Soil samples were collected from the premises and nearby area of Mathura refinery, India. Biological health parameters (dehydrogenase, aryl esterase, aryl sulphatase, \upbeta \upbeta -glucosidase, alkaline phosphatase, acid phosphatase, lipase, laccase and catalase activity) were estimated in the soil samples. Among all the samples, sewage sludge soil showed maximum activity of enzymes, microbial biomass carbon and most probable number of polycyclic aromatic hydrocarbon (PAH) degraders in soils spiked with three- to four-ring PAHs at 50 ppm. Available phosphorus, potassium and nitrogen was also exceptionally high in this sample, indicating maximum microbial bioconversion due to presence of nutrients stimulating potent PAH-degrading microorganisms.     

The Effect of CTBN Concentrations on the Kinetic Parameters of Decomposition of Blends of Epoxy Resins Modified with Carboxyl-Terminated Liquid Copolymer

Diglycidyl ether of bisphenol—A (DGEBA)—based epoxy resin was blended in the ratio of 3:1 (weight basis) with cycloaliphatic epoxy (CAE) resin. The prepared blend sample was further blended with different weight percentages of carboxyl-terminated butadiene acrylonitrile copolymer (CTBN) ranging between 0 and 25 wt% with an interval of 5 wt% and cured with stiochiometric amounts of 4, 4’- diamino diphenyl sulphone (DDS) cure agent. Structural changes during blending were studied by Fourier-transform infra-red (FTIR) spectroscopic analysis. The kinetic parameters, viz., order of decomposition reaction (n), activation energy (E), pre-exponential factor (Z) and rate decomposition constant (k), for the decomposition of the samples were calculated by applying Coats-Redfern equation over thermogravimetric (TG) data. The degradation of each sample followed second-order degradation kinetics, which was calculated by Coats-Redfern equation using best-fit analysis. This was further confirmed by linear regression analysis. The validity of data was checked by t-test statistical analysis. Further, the blend sample had higher initial degradation temperature and activation energy than its respective pure epoxy resin indicating that the CTBN acted as thermal stabilizer for epoxy resin which improved the thermal stability.     

Simultaneous removal of emerging contaminants and disinfection for municipal wastewater treatment plant effluent quality improvement: a systemic analysis of the literature

Environmental Science and Pollution Research - This work presents a bibliographic review of the literature regarding the simultaneous removal of contaminants of emerging concern (CECs) and...     

Cholinesterase characterization and effects of the environmental contaminants chlorpyrifos and carbofuran on two species of marine crabs,Carcinus maenas and Pachygrapsus marmoratus

Among the most frequent targets for toxic effects of modern pesticides, namely organophosphates and carbamates, one may find cholinesterases (ChEs). ChEs exist in a wide variety of animals and have been used actively to discriminate among the environmental effects of different pollutant groups, including the aforementioned pesticides. This study had three purposes, namely (i) identifying the ChE forms present in tissues (eyes and walking legs muscle) of two crab species, Carcinus maenas and Pachygrapsus marmoratus; to (ii) determine the in vitro toxicological effects, and (iii) compare the sensitivity of such enzymatic forms towards commonly used anti-ChE pesticides, namely the organophosphate chlorpyrifos and the carbamate carbofuran. Our results showed that there was not a clear preference for any of the tested substrates in any of the tissues from both species. Furthermore, the ChE activity was almost completely suppressed following incubation with eserine and with the specific inhibitor BW284C51 in all tissues from both species. In vitro exposure to chlorpyrifos promoted a significant decrease in ChE activity in both species. Furthermore, the ChE activity was completely suppressed following incubation with carbofuran and chlorpyrifos. These results suggest that the major ChE forms present in tissues of both crab species show intermediate structural properties and activity patterns, halfway between classic acetylcholinesterase and pseudocholinesterases. However, the sensitivity of the found forms towards ChE inhibitors was established, and the responsiveness of such forms towards common anti-ChE chemicals was established. Both tested species seem to be promising test organisms to be used in marine and coastal scenarios of putative contaminations by anti-ChE chemicals, considering the here reported patterns of response.

     

Contribution of precursor compounds to the release of per- and polyfluoroalkyl substances (PFASs) from waste water treatment plants (WWTPs)

Per-and polyfluoroalkyl substances(PFASs) are ubiquitous in sludge and water from waste water treatment plants, as a result of their incorporation in everyday products and industrial processes. In this study, we measured several classes of persistent PFASs,precursors, transformation intermediates, and newly identified PFASs in influent and effluent sewage water and sludge from three municipal waste water treatment plants in Sweden, sampled in 2015. For sludge, samples from 2012 and 2014 were analyzed as well.Levels of precursors in sludge exceeded those of perfluoroalkyl acids and sulfonic acids(PFCAs and PFSAs), in 2015 the sum of polyfluoroalkyl phosphoric acid esters(PAPs) were 15–20 ng/g dry weight, the sum of fluorotelomer sulfonic acids(FTSAs) was 0.8–1.3 ng/g,and the sum of perfluorooctane sulfonamides and ethanols ranged from non-detected to 3.2 ng/g. Persistent PFSAs and PFCAs were detected at 1.9–3.9 ng/g and 2.4–7.3 ng/g dry weight, respectively. The influence of precursor compounds was further demonstrated by an observed substantial increase for a majority of the persistent PFCAs and PFSAs in water after waste water treatment. Perfluorohexanoic acid(PFHxA), perfluorooctanoic acid(PFOA), perfluorohexane sulfonic acid(PFHxS), and perfluorooctane sulfonic acid(PFOS)had a net mass increase in all WWTPs, with mean values of 83%, 28%, 37% and 58%,respectively. The load of precursors and intermediates in influent water and sludge combined with net mass increase support the hypothesis that degradation of precursor compounds is a significant contributor to PFAS contamination in the environment.     

Detection of Viruses in Coastal Seawater Using <Emphasis Type="Italic">Mytilus Galloprovincialis</Emphasis> as an Accumulation Matrix

The purpose of this study was to demonstrate that shellfish can be used to detect enteric viruses in marine waters where they are present at very low concentrations. Aqua-cultured mussels were placed in the sea just off the mouth of a drainage channel affected by human and animal faecal contamination. Samples were taken from the channel, the sea and the mussels at intervals over two 4-week periods. The samples were tested to verify the presence of both rotaviruses and E. coli. Rotaviruses were detected by Real Time-PCR, typed by multiplex PCR and subsequently sequenced. E. coli was enumerated in water matrices by a filtering method and in mussels by the MPN method. The presence of E. coli in the examined matrices demonstrates contamination of faecal origin throughout the studied environments. Rotaviruses were recorded in channel waters, but not in sea water. In both experiments, rotaviruses were detected in mussels 21 and 28 days after being placed in the sea water off the channel mouth. The use of mussels thus enabled the detection of rotaviruses in waters where the high dilution rendered direct investigation impossible. This study indicates that mussels can be used in marine virological surveillance programs.