Effect of pH values on the solubility of some elements in different soil samples

The purpose of this study is to know the concentrations of some heavy-metal elements (Zn, Pb and Cd) in different types of soil and the effect of pH values on their solubility. Two types of soil were selected from area adjacent to the sewage treatment plant, as well as from an agricultural area in the city of Al-Rass, Qassim, KSA for this purpose. The results showed high concentrations of elements in the acidic medium at pH 2, while concentrations decreased as the pH increased to reach the neutral medium. The decrease in concentrations was very clear in the alkaline medium and reached the lowest values at pH10. On the other hand, the highest concentrations were detected in soil adjacent to the sewage treatment specially for Pb and Cd in comparison with agricultural soil. The previous results show the urgent need for wastewater treatment and checking for pH values at standard limits before use in irrigation or discharge it on soil surface, as well as soil analysis prior to the planting and selection of appropriate plants by specialists for the health of citizens, where each plant characterise by its absorption for specific elements.     

Levels of heavy metals in tissues of shingi fish (Heteropneustes fossilis) from Buriganga River, Bangladesh

Heavy metal pollution was reported in commercially valuable freshwater edible fish in the Buriganga River, Bangladesh. The concentrations of As, Pb, Cd, Cr, Zn, and Cu were investigated in the muscle, gill, stomach, intestine, and liver of Heteropneustes fossilis caught at three stations to assess the degree of fish pollution by heavy metals. Significant differences in concentrations of analyzed elements were observed among different tissues, but not among the stations. The ranges of the measured concentrations (μg/g dry weight) in the tissues of H. fossilis were as follows: arsenic concentration was (0.2–0.4), (0.82–0.90), (3.29–3.99), (2.20–2.80), and (2.41–2.90), that of lead was (1.79–2.20), (4.95–6.55), (10.36–13.38), (5.74–9.70), and (18.20–18.79), that of cadmium was (0.3–0.4), (2.87–4.27), (1.03–1.63), (1.55–4.59), and (2.25–5.50), that of chromium was (1.40–1.70), (3.52–3.72), (2.28–5.29), (2.77–3.79), and (4.25–8.65), that of zinc was (24.47–28.82), (16.82–18.80), (20.22–22.20), (22.86–26.68), and (60.82–67.80), and that of copper was (7.80–8.50), (6.22–6.81), (38.21–44.25), (17.07–21.03), and (43.24–47.30) in the muscle, gill, stomach, intestine, and liver, respectively. This research showed that the liver appeared to be the main heavy metal storage tissue, while the muscle had the lowest levels of analyzed metals. The concentrations of metal in the muscles not exceeded the acceptable levels for a food source for human consumption.     

Continuous adsorptive removal of glimepiride using multi-walled carbon nanotubes in fixed-bed column

Environmental Science and Pollution Research - Water pollution by emerging pollutants such as pharmaceutical and personal care products is one of today’s biggest challenges. The presence of...     

Pesticide risk assessment: A study on inhalation and dermal exposure to 2,4-D and paraquat among Malaysian paddy farmers

A cross-section analytical study was conducted to evaluate the risk of pesticide exposure to those applying the Class II pesticides 2,4-D and paraquat in the paddy-growing areas of Kerian, Perak, Malaysia. It investigated the influence of weather on exposure as well as documented health problems commonly related to pesticide exposure. Potential inhalation and dermal exposure for 140 paddy farmers (handlers of pesticides) were assessed. Results showed that while temperature and humidity affected exposure, windspeed had the strongest impact on pesticide exposure via inhalation. However, the degree of exposure to both herbicides via inhalation was below the permissible exposure limits set by United States National Institute of Occupational Safety and Health (NIOSH). Dermal Exposure Assessment Method (DREAM) readings showed that dermal exposure with manual spraying ranged from moderate to high. With motorized sprayers, however, the level of dermal exposure ranged from low to moderate. Dermal exposure was significantly negatively correlated with the usage of protective clothing. Various types of deleterious health effects were detected among users of manual knapsack sprayers. Long-term spraying activities were positively correlated with increasing levels of the gamma-glutamyl transpeptidase (GGT) liver enzyme. The type of spraying equipment, usage of proper protective clothing and adherence to correct spraying practices were found to be the most important factors influencing the degree of pesticide exposure among those applying pesticides.     

Application of chemometrics in understanding the spatial distribution of human pharmaceuticals in surface water

The growing interest in the environmental occurrence of veterinary and human pharmaceuticals is essentially due to their possible health implications to humans and ecosystem. This study assesses the occurrence of human pharmaceuticals in a Malaysian tropical aquatic environment taking a chemometric approach using cluster analysis, discriminant analysis and principal component analysis. Water samples were collected from seven sampling stations along the heavily populated Langat River basin on the west coast of peninsular Malaysia and its main tributaries. Water samples were extracted using solid-phase extraction and analyzed using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) for 18 pharmaceuticals and one metabolite, which cover a range of six therapeutic classes widely consumed in Malaysia. Cluster analysis was applied to group both pharmaceutical pollutants and sampling stations. Cluster analysis successfully clustered sampling stations and pollutants into three major clusters. Discriminant analysis was applied to identify those pollutants which had a significant impact in the definition of clusters. Finally, principal component analysis using a three-component model determined the constitution and data variance explained by each of the three main principal components.     

Study of contaminant transport at an open-tipping waste disposal site

Field and laboratory studies were conducted to estimate concentration of potential contaminants from landfill in the underlying groundwater, leachate, and surface water. Samples collected in the vicinity of the landfill were analyzed for physiochemical parameters, organic contaminants, and toxic heavy metals. Water quality results obtained were compared from published data and reports. The results indicate serious groundwater and surface water contamination in and around the waste disposal site. Analysis of the organic samples revealed that the site contains polychlorinated biphenyls and other organo-chlorine chemicals, principally chloro-benzenes. Although the amount of PCB concentration discovered was not extreme, their presence indicates a potentially serious environmental threat. Elevated concentrations of lead, copper, nickel, manganese, cadmium, and cobalt at the downgradient indicate that the contamination plume migrated further from the site, and the distribution of metals and metals containing wastes in the site is nonhomogeneous. These results clearly indicate that materials are poorly contained and are at risk of entering the environment. Therefore, full characterization of the dump contents and the integrity of the site are necessary to evaluate the scope of the problem and to identify suitable remediation options.     

Long-range potential source contributions of episodic aerosol events to PM10 profile of a megacity

This paper evaluates possible long-range source contributions to the PM₁₀ profile of Istanbul, Turkey. A novel method for classifying PM₁₀ episodic events resulting from long-range transport, as opposed to local ones, was implemented. Hourly PM₁₀ mass concentrations from ten stations distributed throughout Istanbul during the year 2008 were used for this purpose. Hourly backward trajectories for the arrival of air masses to the center of Istanbul for the year 2008 were calculated using the HYSPLIT (Hybrid Single-Particle Lagrangian Integrated Trajectory) model. Significant episodes from these backward trajectories were selected and employed in Potential Source Contribution Function (PSCF) analysis to estimate the possible contribution of long-range PM₁₀ transport (LRPMT) to observed PM₁₀ concentrations. The PSCF results showed significant seasonal variations. Based on the results obtained, PM₁₀ concentrations observed in Istanbul during summer and autumn are not heavily affected by LRPMT. Mediterranean countries, especially those of the central part of northern Africa (northern Algeria and Libya) are the most significant potential PM₁₀ contributors to Istanbul's atmosphere during springtime. During winter, Balkan countries, including the Aegean part of Turkey, Greece, Bulgaria, Serbia, and Croatia, as well as northern Italy, eastern France, southern Germany, Austria and the eastern part of Russia, were the most important LRPMT source regions for high PSCF values.     

Separation of dissolved iron from the aqueous system with excess ligand

A new technique for the separation and pre-concentration of dissolved Fe(III) from the ligand-rich aqueous system is proposed. A solid phase extraction (SPE) system with an immobilized macrocyclic material, commonly known as molecular recognition technology (MRT) gel and available commercially, was used. Synthetic Fe(III) solution in aqueous matrices spiked with a 100-fold concentration of EDTA was used. Dissolved iron that was ‘captured’ by the MRT gel was eluted using hydrochloric acid and subsequently determined by graphite furnace atomic absorption spectrometry. The effect of different variables, such as pH, reagent concentration, flow rate and interfering ions, on the recovery of analyte was investigated. Quantitative maximum separation (∼100%) of the dissolved Fe(III) from synthetic aqueous solutions at a natural pH range was observed at a flow rate of 0.2 mL min^-1. The extraction efficiency of the MRT gel is largely unaltered by the coexisting ions commonly found in natural water. When compared with different SPE materials, the separation performance of MRT gel is also much higher.     

Analysis of heavy metal concentrations in sediments of selected estuaries of Malaysia—a statistical assessment

Statistical analysis of heavy metal concentrations in sediment was studied to understand the interrelationship between different parameters and also to identify probable source component in order to explain the pollution status of selected estuaries. Concentrations of heavy metals (Cu, Zn, Cd, Fe, Pb, Cr, Hg and Mn) were analyzed in sediments from Juru and Jejawi Estuaries in Malaysia with ten sampling points of each estuary. The results of multivariate statistical techniques showed that the two regions have different characteristics in terms of heavy metals selected and indicates that each region receives pollution from different sources. The results also showed that Fe, Mn, Cd, Hg, and Cu are responsible for large spatial variations explaining 51.15% of the total variance, whilst Zn and Pb explain only 18.93 of the total variance. This study illustrates the usefulness of multivariate statistical techniques for evaluation and interpretation of large complex data sets to get better information about the heavy metal concentrations and design of monitoring network.