利用SPAMS研究华北乡村站点(曲周)夏季大气单颗粒物老化与混合状态

利用单颗粒气溶胶飞行时间质谱(SPAMS)于2013年6月30日~7月8日对华北地区乡村站点曲周大气单颗粒粒径及其化学组成进行了在线测量,共采集到同时含有正负离子谱图的颗粒230 152个,其粒径主要集中在0.2~2.0μm.结果表明,该地区的大气颗粒物主要分为8类:元素碳(EC,55.5%)、有机碳(OC,10.7%)、钠,钾等碱金属颗粒(alkalis,17.4%)、其他金属颗粒(other metals,1.7%)、富铁颗粒(Fe-rich,6.3%)、富铅颗粒物(Pb-rich,3.1%)、沙尘颗粒(dust,4.8%),other颗粒(0.8%),观测得到的8类气溶胶颗粒中绝大部分包含46NO-2、62NO-3、80SO-3、96SO-4、97HSO-4等二次组分离子,说明这些颗粒都经历了不同的老化过程或与二次组分进行了不同程度的混合.从气溶胶类型的谱分布看,各类型颗粒数浓度峰值基本出现在700~800 nm之间,dust、Fe颗粒主要集中在粗粒径段,EC颗粒子类研究表明随着表面不断吸附NH+4、NO-3、SO2-4等二次组分,EC颗粒逐步演化成老化程度较低的NO-3吸附型EC(ECN)和严重老化的SO2-4吸附型EC(ECS)混合态,两者日变化呈现明显的负相关性,也可能随着二次有机物在EC表面吸附,形成OC/EC混合态.     

废旧锌锰电池生物淋滤-水热法制备纳米锰锌铁氧体

以氧化硫硫杆菌(A.thiooxidans)和氧化亚铁钩端螺旋菌(L.ferrooxidans)为混合淋滤菌株对废旧锌锰电池进行了生物浸提,并以获取的淋滤液为前驱体,采用水热法制备出系列锰锌铁氧体软磁材料(Mn_(1-x)Zn_xFe_2O_4,x=0.2~0.8);结合X射线衍射(XRD)、扫描电镜-能谱(SEMEDX)、振动样品磁强计(VSM)、透射电镜(TEM)、红外光谱(FT-IR)、热重-差热分析(TG-DTA)等表征手段对制备材料的结构、形貌、磁学性能和稳定性进行分析.结果表明,在5%固液比(质量体积比,5 g/100 mL,以下均表述为"5%固液比")下,经过5 d的外源酸调控生物浸提,分别获得了84.5%、63.2%的Zn、Mn浸出效率;当Zn∶Mn∶Fe=0.4∶0.6∶2.0(物质的量比,即x=0.4)时,制备的纳米级Mn_(0.6)Zn_(0.4)Fe_2O_4性能最优,属纯相的立方尖晶石结构,颗粒分布均匀,饱和磁化强度(M_s)、剩余磁化强度(M_r)和矫顽力(H_c)分别为68.9 emu·g~(-1)、4.7 emu·g~(-1)和53.6 Oe,具有热稳定性和耐酸碱性,有望成为一种新型的水处理磁性材料.     

反渗透膜面细菌胞外多聚物提取方法研究

城市污水脱盐系统的反渗透(RO)膜面生物污堵问题严重影响了该技术的稳定运行,解析生物污堵机理的关键因素是微生物胞外多聚物(EPS)特征分析,然而目前细菌EPS提取方法多样,无统一标准,制约了EPS分析的可靠性和可对比性.基于此,本文以再生水厂RO膜面污堵物中分离的细菌为对象,采用水浴、超声、离子树脂、碱液4种方法提取EPS,以DOC和DNA含量表征提取的EPS总量和提取过程细胞破裂程度.结果表明,45℃水浴法不造成细胞破裂,提取总量多,是一种有效的提取方法.进一步对比不同提取时间条件下EPS溶液中多糖和蛋白含量变化,以及分子量、荧光特征等,综合认为提取1 h时,提取的EPS中多糖与蛋白相对含量稳定,不同分子量化合物均溶于水中,能客观地反映EPS特征.研究表明,45℃水浴1 h可以作为细菌EPS提取的适用方法应用.     

下翼缘摩擦式自定心钢框架梁柱节点抗震性能的数值模拟

介绍了一种新型的钢框架梁柱节点形式,其中预应力钢绞线提供了结构在地震作用下的复位功能(自定心),设置在梁端下翼缘的摩擦件则为结构提供了耗能能力;介绍了下翼缘摩擦式自定心钢框架梁柱节点的构造和工作原理,以节点的低周反复加载试验结果为依据,利用面向对象的开放式计算程序OpenSees建立了节点的数值模型,并侧重于模拟节点在...     

粗MnSO4溶液中MnS2O6的去除条件研究

用软锰矿吸收SO2生成MnSO4时会伴随有副产物MnS2O6生成。产品中MnS2O6的存在会降低硫酸锰产品质量,同时会缓慢释放出SO2气体污染环境。本文用单因素实验方法研究了粗MnSO4溶液中MnS2O6的最优去除条件。研究结果显示,软锰矿用量为12.2 g,硫酸加入量为20 mL、反应温度100℃、反应时间3 h、搅拌速度500 r/min,MnS2O6的去除率可达91%以上。其最终产品能达到GB1622-1986一级品标准。     

Plasticity in metamorphic traits of <Emphasis Type="Italic">Rana kukunoris</Emphasis> tadpoles: The interactive effects of food level and rearing temperature

Larval amphibians are particularly likely to encounter variation in rearing temperature and resource availability due to variation in aquatic breeding habitats. In this study, plasticity in growth rates, larval mass, larval period, and size at metamorphosis were examined in Rana kukunoris Nikolskii, 1918 under different combinations of temperature and food level. Larval period and larval body mass was sensitive to food level, and varied with temperature. Tadpoles metamorphosed at an older age at low temperature than those reared at warm temperature. Food level was a significant affect on larval period at low temperature, but not at warm temperature. Mass was heavier for tadpoles reared at low temperatures than those reared at warm temperatures. The effect of food level depended on temperature, because larvae reared at low temperature that were offered a high food level achieved a larger size than larvae offered a low food level, but this did not occur at warm temperature. Therefore, we suggest that high food availability at low temperature prolonged developmental periods, thus larvae are larger as metamorphs than those reared at warm temperatures.     

Some technical issues in managing PCBs

Polychlorinated biphenyls (PCBs) were important industrial chemicals featuring high thermal and chemical stability and low flammability. They were widely used as dielectric and thermal fluid in closed electro-technical applications (transformers, capacitors…) and also in numerous dispersive uses, ranking from auto-copying paper to sealant or coatings. During the 1960s, severe environmental consequences started becoming apparent. The stability of PCBs contributed to their persistence in the environment, their lipophilic character to bio-magnification. Fish-eating species seemed threatened in their existence. In Japan and in Taiwan, thousands of people consumed PCB-contaminated oil. The production of PCBs stopped completely during the 1980s. Usage could continue in closed applications only. In this paper, particular attention is given to two issues: the cleaning of PCB electric transformers and the potential impact of PCB-containing building materials. Other contributions will cover the management and treatment of PCB-contaminated soil, sludge or fly ash. The complete survey is being prepared by request of the Knowledge Center for Engineers and Professionals.     

Pollution characteristics of ambient volatile organic compounds (VOCs) in the southeast coastal cities of China

With the rapid urbanization, the southeast coastal cities of China are facing increasing air pollution in the past decades. Large emissions of VOCs from vehicles and petrochemical factories have contributed greatly to the local air quality deterioration. Investigating the pollution characteristics of VOCs is of great significance to the environmental risk assessment and air quality improvement. Ambient VOC samples were collected simultaneously from nine coastal cities of southeast China using the Tedlar bags, and were subsequently preprocessed and analyzed using a cryogenic preconcentrator and a gas chromatography–mass spectrometry system, respectively. VOC compositions, spatial distributions, seasonal variations and ozone formation potentials (OPFs) were discussed. Results showed that methylene chloride, toluene, isopropyl alcohol and n-hexane were most abundant species, and oxygenated compounds, aromatics and halogenated hydrocarbons were most abundant chemical classes (62.5–95.6 % of TVOCs). Both industrial and vehicular exhausts might contribute greatly to the VOC emissions. The VOC levels in the southeast coastal cities of China were sufficiently high (e.g., 6.5 μg?m^?3 for benzene) to pose a health risk to local people. A more serious pollution state was found in the southern cities of the study region, while higher VOC levels were usually observed in winter. The B/T ratio (0.26?±?0.09) was lower than the typical ratio (ca. 0.6) for roadside samples, while the B/E (1.6–7.6) and T/E (7.2–26.8) ratios were higher than other cities around the world, which indicated a unique emission profile in the study region. Besides, analysis on ozone formation potentials (OFPs) indicated that toluene was the most important species in ozone production with the accountabilities for total OFPs of 22.6 to 59.6 %.     

某钢厂烧结烟气脱硫系统滤袋失效原因分析

分析了聚苯硫醚自身特性,从而了解目前烧结烟气脱硫系统袋式除尘器中选择其作为滤料的原因。并就目前某钢厂烧结烟气脱硫系统实际发生的滤袋失效问题,通过扫描电镜、EDS能谱分析及烧失量实验对滤袋进行分析,发现材料中混入的玻璃纤维是造成其失效的主要原因,为今后实际工程中滤袋的选择提供依据,从而尽量减少不必要的损失,确保烟气脱硫项目的正常运行。     

脉冲电解法预处理酸性染料废水

研究了脉冲电解法预处理酸性偶氮类染料废水的处理效果,考察了不同工艺条件对废水COD去除率、脱色率和可生化性的影响。结果表明,脉冲电源峰值电压12 V,频率600 Hz,占空比50%的条件下电解40 min后,COD去除率可达59%,废水脱色率达91.4%,BOD5/COD由0.09提高至0.34。在相同条件下,脉冲电解法的电流效率是直流电解法的2倍左右。与现行常用的铁/碳反应床相比,脉冲电解法在成本上也具有一定的优势,应用前景较好。