Status differences in collective action and forest benefits: evidence from joint forest management in India

Does status matter in community-based forest management? If so, are the high-status households more benefited than the low-status households? What drives status differences, if any, in the appropriation of forest resources? To address these questions, we draw on a theory of status and resource use that defines one’s status as one’s relative position in a group on the basis of power, prestige, honor and deference. Following this perspective, we surveyed the heads of 341 forest-based rural households in India from 2009 to 2010. We find that collective actions themselves are status-driven and the high-status households are more interested and involved in status-maintaining collective actions such as decision-making and implementation, while the low-status households perform general tasks like forest patrol. Moreover, the high-status households derive benefits from local forest significantly more than the low-status households. Further, decomposition analysis shows that a household’s prestige and honor measured by its access to social resources, problem faced and useful contacts explain about 56 % of the status gap in forest benefits, while socioeconomic characteristics explain only 16 % of the gap. Thus, due emphasis on household status from a broader socioeconomic perspective is required to reduce inequality in participation and the distribution of forest benefits in co-management.     

Mechanism of the intermittent motion of two-phase debris flows

A typical two-phase debris flow exhibits a high and steep flow head consisting of rolling boulders and cobbles with intermittent or fluctuating velocity. The relative motion between the solid phase and the liquid phase is obvious. The motion of a two-phase debris flow depends not only on the rheological properties of the flow, but also on the energy transmission between the solid and liquid phases. Several models have been developed to study two-phase debris flows. An essential shortcoming of most of these models is the omission of the interaction between the two phases and identification of the different roles of the different materials in two-phase debris flows. The tracer particles were used for the velocity of solid phase and the velocity of liquid phase was calculated by the water velocity on the surface of the debris flow in the experiments. This paper analyzed the intermittent feature of two-phase debris flows based on videos of debris flows in the field and flume experiments. The experiments showed that the height of the head of the two-phase debris flow increased gradually in the initiation stage and reached equilibrium at a certain distance from the start of the debris flow. The height growth and the velocity of the flow head showed fluctuating characteristics. Model equations were established and the analyses proved that the average velocity of the two-phase debris flow head was proportional to the flood discharge and inversely proportional to the volume of the debris flow head.     

Evaluation of existing equations for temporal scour depth around circular bridge piers

Scour is defined as the processes of removal of sediment particles from water stream bed by the erosive action of activated water, and also carries sediment away from the hydraulic structures. Scour is the main cause of pier failure. Numerous equations are available for estimating temporal and equilibrium scour depth. The present study describes the phenomenon of temporal scour depth variation at bridge piers and deals with the methods for its estimation. The accuracy of six temporal scour depth equations are also checked in this study. After graphical and statistical analysis, it was found that the relationship proposed by Oliveto and Hager (J Hydraul Eng (ASCE) 128(9):811–520, 2002) predicts temporal scour depth better than other equations. Three equations of equilibrium time of scour are also used for computing equilibrium time. Equilibrium time equation proposed by Choi and Choi (Water Environ J 30(1–2):14–21, 2016) gives better agreements with observed values.     

Modeling of Cr contamination in the agricultural lands of three villages near the leather industry in Kasur,Pakistan, using statistical and GIS techniques

Kasur is one of the hubs of leather industry in the Punjab, Pakistan, where chrome tanning method of leather processing is extensively being used. Chromium (Cr) accumulation levels in the irrigation water, soil, and seasonal vegetables were studied in three villages located in the vicinity of wastewater treatment plant and solid waste dumping site operated by the Kasur Tanneries Waste Management Agency (KTWMA). The data was interpreted using analysis of variance (ANOVA), clustering analysis (CA), and principal component analysis (PCA). Interpolated surface maps for Cr were generated using the actual data obtained for the 30 sampling sites in each of the three villages for irrigation water, soil, and seasonal vegetables. The level of contamination in the three villages was directly proportional to their distance from KTWMA wastewater treatment plant and the direction of water runoff. The highest level of Cr contamination in soil (mg kg^?1) was observed at Faqeeria Wala (37.67), intermediate at Dollay Wala (30.33), and the least in Maan (25.16). A gradational variation in Cr accumulation was observed in the three villages from contaminated wastewater having the least contamination level (2.02–4.40 mg L^?1), to soil (25.16–37.67 mg kg^?1), and ultimately in the seasonal vegetable crops (156.67–248.33 mg kg^?1) cultivated in the region, having the highest level of Cr contamination above the permissible limit. The model used not only predicted the current situation of Cr contamination in the three villages but also indicated the trend of magnification of Cr contamination from irrigation water to soil and to the base of the food chain. Among the multiple causes of Cr contamination of vegetables, soil irrigation with contaminated groundwater was observed to be the dominant one.     

Ecological footprint: an indicator of environmental sustainability of a surface coal mine

Ecological footprint of mining can be used as an indicator to monitor and regulate mining operations and ensure long-term environmental sustainability. It can be viewed as a mining footprint, which is surrogate of the environmental impacts of mining. In this paper, a methodological framework is developed to demonstrate how ecological footprint can be used as an indicator of environmental degradation. Nine air quality and 26 soil quality samples are collected from the adjoining area of a mechanized coal mine, located in Raniganj coal mining belt of Burdwan district, West Bengal. Geographical information system is used for data interpolation and preparation of air and soil quality maps. The weights of different air and soil quality parameters are calculated by running principal component analysis. These derived weights are used for preparation of final composite air and soil quality maps. The composite maps show the mining footprints, expressed as land equivalent, around the active mine sites. The impact zones reveal the extent of degradation of the soil and air qualities in the areas near a mine. It is found that the impact zones, with respect to air and soil qualities, extend over areas which are 7.7 and 7.8 times the actual mining areas, that is, the area covered under mining operations, respectively. The results show the extent of degradation of air and soil qualities of the area. At different stages of mining, these footprints can be used as indicators to reveal the areas where soil and air qualities are adversely impacted.     

Sustainable cooking energy options for rural poor people in India: an empirical study

Currently, energy consumption for cooking in rural households of India is mostly based on fuelwood used in traditional stoves. This paper presents results of a study carried out in a forest fringe area of India on cooking energy use. The concept of calculating levelized cost as cost per unit of useful energy is applied on source–device combinations of cooking and validated in Bargaon Community Development Block of Sundergarh District in Odisha, India. About 92 % of the households in the study area use fuelwood as the only energy source for cooking; the total use of fuelwood for only cooking, in the Block is nearly 1.8 times the total sustainable wood supply showing an urgent need for promoting alternative cooking energy options. This paper also presents an assessment of different cooking options in terms of cost per unit of useful cooking energy. LPG, biogas and gasifier stoves are found to be far too expensive for the local people. Briquette-fired improved stoves appear to be a promising cooking energy option in the study area. Government support and intervention are recommended for promoting this option.     

Rural household vulnerability to climate risk in Uganda

Regional Environmental Change - Vulnerability assessment is fundamental for informing adaptation to climate change policy. The aim of this study is to evaluate the vulnerability of rural...     

Locating Spatial Variation in the Association Between Wildland Fire Risk and Social Vulnerability Across Six Southern States

Wildland fire in the South commands considerable attention, given the expanding wildland urban interface (WUI) across the region. Much of this growth is propelled by higher income retirees and others desiring natural amenity residential settings. However, population growth in the WUI increases the likelihood of wildfire fire ignition caused by people, as humans account for 93% of all wildfires fires in the South. Coexisting with newly arrived, affluent WUI populations are working class, poor or otherwise socially vulnerable populations. The latter groups typically experience greater losses from environmental disasters such as wildfire because lower income residents are less likely to have established mitigation programs in place to help absorb loss. We use geographically weighted regression to examine spatial variation in the association between social vulnerability (SOVUL) and wildfire risk. In doing so, we identify “hot spots” or geographical clusters where SOVUL varies positively with wildfire risk across six Southern states—Alabama, Arkansas, Florida, Georgia, Mississippi, and South Carolina. These clusters may or may not be located in the WUI. These hot spots are most prevalent in South Carolina and Florida. Identification of these population clusters can aid wildfire managers in deciding which communities to prioritize for mitigation programming.     

Impact of PAH on biological health parameters of soils of an Indian refinery and adjoining agricultural area—a case study

The present study is aimed at analysing and comparing different soil enzymes in soil samples of native contaminated sites of a Mathura refinery and adjoining agricultural land. Enzyme activities are considered as indicators of soil quality and changes in biogeochemical function due to management or perturbations. Soil samples were collected from the premises and nearby area of Mathura refinery, India. Biological health parameters (dehydrogenase, aryl esterase, aryl sulphatase, \upbeta \upbeta -glucosidase, alkaline phosphatase, acid phosphatase, lipase, laccase and catalase activity) were estimated in the soil samples. Among all the samples, sewage sludge soil showed maximum activity of enzymes, microbial biomass carbon and most probable number of polycyclic aromatic hydrocarbon (PAH) degraders in soils spiked with three- to four-ring PAHs at 50 ppm. Available phosphorus, potassium and nitrogen was also exceptionally high in this sample, indicating maximum microbial bioconversion due to presence of nutrients stimulating potent PAH-degrading microorganisms.