地质灾害海量监测数据处理方法研究

随着地质灾害信息化管理的快速发展以及云技术、物联网、移动互联网技术的广泛应用,极大地推动了地质灾害无线自动化监测技术的进步,随着这一技术的成熟,地质灾害监测数据量突飞猛涨、数据类型也越来越复杂。本文结合具体科研项目,在总结地质灾害无线自动化监测流程和监测数据特征的基础之上,针对地质灾害海量监测数据对存储、检索方面的新要求,在硬件、软件方面进行了相应的优化工作,并开发了地质灾害监测数据自动入库系统,解决了多源监测数据集成的难题,同时基于数据挖掘技术,构建了地质灾害监测数据调试系统,充分挖掘大数据的隐藏价值,最终开发了地质灾害监测数据展示平台。     

佛山高明河水环境多环芳烃的分布特征与通量研究

利用液液萃取法和气相色谱-质谱方法对佛山境内高明河水环境多环芳烃（PAHs）进行了测定,并对PAHs的分布特征与通量进行了初步研究.结果表明高明河水环境中16种优控PAHs的浓度范围在41.6～375.6 ng/l之间,从上游到下游总体呈递增的趋势,其下游浓度偏高可能与荷城街道较为密集的工业和人口分布有关.高明河水环境PAHs的总含量高于欧美一些低污染水域,但低于国内一些主要河流.高明河PAHs年通量约为333.8 kg.     

浅谈机房监控系统对数据机房节能减排的帮助

针对目前机房动环监控系统对配电系统、空调系统、通信设备、优化布局管理利于数据机房节能减排的技术与措施进行介绍分析。数据机房能耗指标是衡量数据机房能效的量化标准,它可以反映出数据机房运行过程中的电能利用情况,也作为数据机房设计和运维改进的重要依据,也为不同数据机房之间能效比较提供依据。     

环境监测数据质量探究

"数据是产品,质量是生命"如实的反映了数据质量对于整个环境监测工作的重要性。只有保证环境监测数据的准确性、代表性、可比性、完整性、精密性才能真正体现环境监测结果的客观真实,为环境保护、节能环保政策的制定提供决策依据。本文就环境监测数据"五性"的含义及其实现方法进行了简要论述。     

生态环境GIS数据监测的内涵及应用

环境问题作为当今事业的重点问题,引起了各个行业和部门的重视,GIS数据监测在环境监测中起到重要科学依据作用。随着生态破坏导致的各种自然灾害的不断的增加,人们逐渐的认识到了生态和环境保护同自身发展之间的重要关系。这种情况下,有关部门就应该做好生态环境的监测工作,以更好的为生产建设提供指导。     

《中国环境科学》被Ei收录

正根据Ei总部2013年颁布的期刊收录情况,《中国环境科学》已被Ei数据库作为源期刊收录,详见http://www.chinaeidata.com/periodical.htm     

高空气象和地形数据对ADMS模型预测结果的影响

以某钢铁厂烧结单元SO2评价因子为例,对比分析ADMS模型在高空气象、地形数据等不同取值条件下的预测结果。结果表明:高空气象数据和地形数据对区域网格点最大预测值均有一定影响,复杂地形对预测结果的影响很大,且影响大于高空气象的影响;高空气象数据和地形数据对敏感点预测结果均有一定影响,但变化规律不明显,敏感点预测值有增加和降低两种趋势。     

水稻种植对中亚热带红壤丘陵区小流域氮磷养分输出的影响

以湖南省长沙县的脱甲流域(高水稻种植面积比例)和涧山流域(低水稻种植面积比例)为研究对象,对比研究红壤丘陵地区典型农业流域水稻种植对河流水体氮磷浓度和输出强度的影响.连续16个月的监测结果表明,脱甲和涧山流域河流水体均存在比较严重的养分污染,尤其是氮污染;对比两个流域,脱甲流域河流水体的氮磷浓度水平和水质恶化程度均高于涧山流域.从养分组成来看,脱甲流域河流水体中氮以铵态氮为主(占总氮的58.5%),而涧山流域主要是硝态氮(占总氮的76.1%).脱甲流域中可溶性磷占总磷比例为47.1%,高于涧山流域的37.5%.从养分浓度变化的时间动态而言,两个流域河流中各形态氮素水平在1~2月和7月较高,而可溶性磷和总磷在5~6月和10~12月出现两个峰值.由于两个流域河道径流主要集中在水稻种植期间的4~10月,脱甲流域河流中较高的氮磷养分浓度意味着潜在的氮磷流失风险.脱甲流域月平均总氮输出通量为1.67 kg·(hm2·月)-1,总磷为0.06 kg·(hm2·月)-1,均高于涧山流域的0.44 kg·(hm2·月)-1和0.02kg·(hm2·月)-1.考虑到两个流域的气候、地形地貌、土壤类型、农田耕作方式相似而只是水稻种植面积比例不同,因此,在该地区传统的水稻栽培管理模式下,较高面积比例的水稻种植对流域河流水体环境存在潜在威胁.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Inhibitory effects of nisin-coated multi-walled carbon nanotube sheet on biofilm formation from Bacillus anthracis spores

Multi-walled carbon nanotube（MWCNT） sheet was fabricated from a drawable MWCNT forest and then deposited on poly（methyl methacrylate） film. The film was further coated with a natural antimicrobial peptide nisin. We studied the effects of nisin coating on the attachment of Bacillus anthracis spores, the germination of attached spores, and the subsequent biofilm formation from attached spores. It was found that the strong adsorptivity and the super hydrophobicity of MWCNTs provided an ideal platform for nisin coating. Nisin coating on MWCNT sheets decreased surface hydrophobicity, reduced spore attachment, and reduced the germination of attached spores by 3.5 fold, and further inhibited the subsequent biofilm formation by 94.6% compared to that on uncoated MWCNT sheet. Nisin also changed the morphology of vegetative cells in the formed biofilm.The results of this study demonstrated that the anti-adhesion and antimicrobial effect of nisin in combination with the physical properties of carbon nanotubes had the potential in producing effective anti-biofilm formation surfaces.