Debromination of decabromodiphenyl ether by organo-montmorillonite-supported nanoscale zero-valent iron：Preparation, characterization and influence factors

An organo-montmorillonite-supported nanoscale zero-valent iron material(M-NZVI) was synthesized to degrade decabromodiphenyl ether(BDE-209). The results showed that nanoscale zero-valent iron had good dispersion on organo-montmorillonite and was present as a core-shell structure with a particle size range of nanoscale iron between 30–90 nm, characterized by XRD, SEM, TEM, XRF, ICP-AES, and XPS. The results of the degradation of BDE-209 by M-NZVI showed that the efficiency of M-NZVI in removing BDE-209 was much higher than that of NZVI. The efficiency of M-NZVI in removing BDE-209 decreased as the pH and the initial dissolved oxygen content of the reaction solution increased, but increased as the proportion of water in the reaction solution increased.     

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium nanoparticles

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium （Pd） nanoparticles was studied for the first time. The effects of Pd loading, dye concentration and reuse repetitions of membranes were investigated. In reduction, the dye concentration decreased whereas the pH rose gradually. An optimal Pd loading was found. The catalytic membranes were able to be reused more than 3 times.     

纳米铁的合成、性质及其在环境修复领域的应用

由于纳米铁的特殊性质,它在环境修复领域中的应用日渐增加。本文主要介绍了纳米铁的合成、性质以及在环境修复领域的应用情况。文章归纳了目前常用的几种纳米铁合成的物理方法和化学方法;介绍了纳米铁微粒重要的理化性质;并总结了纳米铁用于修复含氯有机物污染、重金属污染和其他无机物污染场地的应用情况。     

Evaluating the effectiveness of marine actinobacterial extract and its mediated titanium dioxide nanoparticles in the degradation of azo dyes

Aim of the present study was to synthesize titanium dioxide nanoparticles （YiO2 NPs） from marine actinobacteria and to develop an eco-friendly azo-dye degradation method. A total of five actinobacterial isolates were isolated from Chennai marine sediments, Tamilnadu, India and analyzed for the synthesis of TiO2 NPs using titanium hydroxide. Among these, the isolate PSV 3 showed positive results for the synthesis of TiO2 NPs, which was confirmed by UV analysis. Further characterization of the synthesized TiO2 NPs was done using XRD, AFM and FI＇-IR analysis. Actinobacterial crude extract and synthesized TiO2 NPs was found efficient in degrading azo dye such as Acid Red 79 （AR-79） and Acid Red 80 （AR-80）. Degradation percentage was found to be 81% for AR-79, 83% for AR-80 using actinobacterial crude extract and 84% for AR-79, 85% for AR-80 using TiO2 NPs. Immobilized actinobacterial ceils showed 88% for AR-79 and 81% for AR- 80, dye degrading capacity. Degraded components were characterized by FT-IR and GC-MS analysis. The phytotoxicity test with 500 μg/mL of untreated dye showed remarkable phenotypic as well as cellular damage to Tagetes erecta plant. Comparatively no such damage was observed on plants by degraded dye components. In biotoxicity assay, treated dyes showed less toxic effect as compared to the untreated dyes.     

Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.     

Efficient dechlorination of chlorinated solvent pollutants under UV irradiation by using the synthesized TiO2 nano-sheets in aqueous phase

Titanium dioxide(TiO2), which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabutyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetrachloroethene(PCE), trichloroethene(TCE) and 1,1,1-trichloroethane(TCA). The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commercial P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene(NB) as a probe of hydroxyl radical(.OH), the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of.OH generated in UV/synthesized TiO2system. In addition,.OH concentration was confirmed by the strong peak displayed in EPR analysis over UV/synthesized TiO2system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 nm, side length of 50 nm and width of 33 nm and a surface 90.3 m2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.     

盐酸小檗碱纳米乳的抑藻性能研究

选用处方为表面活性剂吐温-80、助表面活性剂甘油、油相大豆油及水,制备盐酸小檗碱纳米乳,并在对该纳米乳质量评价的基础上研究其对铜绿微囊藻的抑制效应。结果表明:在四相质量比为36∶9∶5∶10情况下制备出的水包油型盐酸小檗碱纳米乳澄清透明,分散均匀,平均粒径约为(14.2±3.8)nm,载药量为3 980 mg/L。该纳米乳能大幅提高盐酸小檗碱的抑藻性能,2 mg/L盐酸小檗碱纳米乳抑藻性能与8 mg/L未纳米化盐酸小檗碱抑藻性能相当,同时结果表明盐酸小檗碱纳米乳对无毒微囊藻的抑制效应强于有毒微囊藻。该研究将纳米药物技术应用于有害藻类的防控并取得较好效果,为纳米药物技术在水产养殖业应用提供科学参考。     

地下水中常见离子对纳米零价铁除Se（Ⅳ）动力学的影响

采用间歇实验对纳米零价铁(nZVI)除四价硒(Se(Ⅳ))进行实验性研究,考察了地下水中共存离子对nZVI除Se(Ⅳ)动力学的影响.结果表明,在厌氧条件下,当nZVI投加量为0.1 g·L-1,Se(Ⅳ)浓度为100μmol·L-1,NaCl浓度为0.01 mol·L-1,pH=7.0,T=25℃±1℃时,投加CO2-3或SO2-4浓度为1 mmol·L-1、腐殖酸(humic acid,HA)为5 mg·L-1时,明显抑制了Se(Ⅳ)的去除.投加0.5 mmol·L-1Ca2+或Mg2+时,对除Se(Ⅳ)影响不大;而Ca2+(3 mmol·L-1)、Mg2+(3 mmol·L-1)时,Se(Ⅳ)的去除效率明显下降.未加共存离子时,Se(Ⅳ)在20 min时基本去除完,共存离子存在的情况下,nZVI对Se(Ⅳ)的去除率在30 min时达到100%.反应过程中二价铁(Fe2+)随着Se(Ⅳ)的去除趋于平稳.ORP在反应过程中快速从正值下降至负值,由此说明nZVI除Se(Ⅳ)的过程发生了还原反应.     

纳米Fe0粒子对产乙烯脱卤菌群脱氯性能和多样性影响研究

为探讨纳米Fe0粒子对产乙烯脱卤菌群脱氯性能和物种多样性的影响,采用纳米Fe0粒子与产乙烯脱卤菌群联合脱氯,并通过气相色谱、PCR-DGGE和TEM等技术手段进行相关表征.结果表明:当纳米Fe0粒子浓度为0~0.50 g·L-1时,体系的脱氯速率提高较小,低于40%,且菌种数量无明显变化;当其浓度为0.50~1.00 g·L-1时,体系的脱氯速率由0.31μmol·h-1提高到0.77μmol·h-1,体系的脱氯速率提高了60%,部分DGGE条带消失,多样性减少.TEM结果显示,产乙烯脱卤拟球菌在与纳米Fe0粒子接触部位有轻度破损,但细胞没有破裂.纳米Fe0粒子浓度较高时对产乙烯脱卤菌群的脱氯有明显的促进作用,但会使产乙烯脱卤菌群物种多样性减少.     

两种新型涂铁改性砂的过滤性能及反冲洗条件研究

以两种新型涂铁改性石英砂(纳米氧化铁改性砂,Nano-OCS;氧化铁改性砂,IOCS)及普通石英砂(RQS)为研究对象,考察了两种新型改性砂对沉后水腐殖酸及浊度的直接过滤效果,对其反冲洗条件进行优化研究,并对3种滤料的过滤效果进行了比较.结果表明,1滤层厚度为45 cm时,最佳滤速为6 m·h-1;3种滤料对腐殖酸和浊度的直接过滤效果依次为:Nano-OCSIOCSRQS,其中两种涂铁砂对腐殖酸的去除率分别为71.70%和61.61%;2Nano-OCS和IOCS滤柱的反冲洗流程分4步,对应的流程及最佳操作条件为:首先,用0.5 mol·L-1NaOH的溶液浸泡,气冲强度13 L·s-1·m-2,气冲时间6 min;然后,用0.075 mol·L-1的NaOH溶液与空气同时反冲洗,NaOH溶液冲洗强度为8 L·s-1·m-2,气冲强度13 L·s-1·m-2,冲洗时间3 min;接着用0.015 mol·L-1的FeCl3溶液与空气同时反冲洗,FeCl3溶液冲洗强度为8 L·s-1·m-2,气冲强度13L·s-1·m-2,冲洗时间2 min;最后,用清水冲洗,冲洗强度8 L·s-1·m-2,冲洗时间4 min.两种涂铁砂反冲洗前后表面形态结构更加复杂、粗糙度增加,对腐殖酸去除率进一步提高.3当滤层厚度由45 cm增加到80 cm时,Nano-OCS对腐殖酸直接过滤的最高去除率由74.6%提高至80.3%,平均去除率由57.9%提高至68.5%.