凹凸棒石基复合材料处理印染废水的研究

以凹凸棒石为载体,钛酸四丁酯为原料,通过溶胶-凝胶法,制成TiO2/凹凸棒石基复合材料(TiO2/ATT),并对所制得的复合材料进行了XRD和BET表征。在波长为254 nm的16 W紫外灯光照下,以活性黑KN-B印染废水为脱色对象,分别探讨了TiO2/凹凸棒石复合材料的煅烧温度、投加量、活性黑KN-B染料的初始浓度、溶液的pH值和反应温度等因素对印染废水脱色率的影响。实验结果表明:用煅烧温度500℃的TiO2/凹凸棒石基复合材料处理活性黑KN-B印染废水,催化剂的投加量为15 g/L、活性黑KN-B的初始浓度为10 mg/L、pH小于7、反应温度为20℃时,光催化反应4 h内即能达到较高的去除率,对活性黑KN-B的脱色率可达95%以上。     

铋-镧复合氧化物的制备与光催化活性

以同时含La(Ⅲ)和B(iⅢ)的双金属配合物BiLa(dtpa)(NO3).3.5H2O为前驱体,通过500℃的热分解制得铋-镧复合氧化物Bi0.775La0.225O1.5,并利用XRD、SEM和UV-Vis漫反射等分析手段研究灼烧时间对样品的结构及光吸收特性的影响。以甲基橙模拟废水的光催化降解为模型,研究不同灼烧时间对铋-镧复合氧化物光催化活性的影响。结果表明,热分解所得铋-镧复合氧化物样品呈疏松多孔结构,对光具有较宽的吸收范围,在紫外光区具有较好的光催化活性,灼烧时间影响样品的粒径和形貌以及光催化效果,在20 mg/L甲基橙溶液中添加灼烧1 h和4 h所得的催化剂样品1 g/L,光照4 h后甲基橙褪色率分别达95%和91%。     

Enhanced photocatalytic activity of quantum-dot-sensitized one-dimensionally-ordered ZnO nanorod photocatalyst

An efficient photocatalyst was fabricated by assembling quantum dots （QDs） onto one-dimensionally-ordered ZnO nanorods, and the photocatalytic properties for Methyl Orange degradation were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-Vis-NIR absorption spectroscopy and photoluminescence. The results indicate that the catalyst with assembled QDs is more favorable for the degradation than the pristine ZnO nanorods. The QDs with core-shell structure lower the photocatalytic ability due to the higher carder transport barrier of the ZnS shell layer. Besides its degradation efficiency, the photocatalyst has several advantages given that the one-dimensionally-ordered ZnO nanorods have been grown directly on indium tin oxide substrates. The article provides a new method to design an effective and easily recyclable photocatalyst.     

Photocatalytic activity of TiO2 containing anatase nanoparticles and rutile nanoflower structure consisting of nanorods

A series of TiO2 with different crystal phases and morphologies was synthesized via a facile hydrothermal process using titanium nbutoxide and concentrated hydrochloric acid as raw materials. The photocatalytic activity of the samples was evaluated by degradation of Methyl Orange in aqueous solution under UV-Visible light irradiation. On the basis of detailed analysis of the characterizing results of high-resolution transmission electron microscopy, X-ray powder diffraction measurements, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller measurement, it was concluded that the photo-activity of the catalyst is related directly to the 3D morphology and the crystal phase composition. An excellent catalyst should have both a futile 3D flower-like structure and anatase granulous particles. The 3D flower-like structure could enhance light harvesting, as well as the transfer of reactant molecules from bulk solution to the reactive sites on TiO2. In addition, the optimum anatase/rutile phase ratio was found to be 80：20, which is beneficial to the effective separation of the photogenerated electron-hole pairs.     

TiO2/PS/Fe3O4 光催化剂的低温制备及其光催化和磁回收性能

以聚苯乙烯(PS)包覆油酸修饰过的纳米Fe3O4为磁核,在低温(90℃)、中性(pH=7左右)条件下,制备了以PS为惰性隔离层的磁载TiO2光催化剂.用X射线衍射仪(XRD)、透射电子显微镜(TEM)、傅里叶红外分光光度计(FT-IR)、振动样品磁强计(VSM)对催化剂的物相组成、形貌、表面性质、磁学性质进行了表征.以苯酚为模拟污染物,考察了其光催化活性,以自制的磁回收装置,考察其回收特性.结果表明,低温制备的TiO2为锐钛矿结构,平均粒径为2～5 nm,催化剂TiO2/PS/Fe3O4[其中物质的量比为n(TiO2)∶n(St)∶n(Fe3O4)=60∶2.5∶1]具有结构完整的壳/壳/核结构,TiO2在PS/Fe3O4表面负载牢固;光催化降解苯酚遵循一级反应动力学方程,TiO2/PS/Fe3O4[n(TiO2)∶n(St)∶n(Fe3O4)=60∶2.5∶1]的反应速率常数K=0.025 8,与纯TiO2的活性接近(K=0.026 2);循环使用5次后,反应速率常数仅降低0.003 4.所制催化剂具有较强的磁感应强度,平均回收率可达到92%以上.该低温水解法制备的磁载TiO2光催化剂具有良好的应用前景.     

不同终点检测5种双酚A类化合物对MCF-7的细胞毒性

双酚A(BPA)及其类似物作为聚碳酸酯的主要合成原料,一直是环境污染的重要问题.其雌激素效应是当今科学研究的重点,而毒性效应研究甚少.为评估环境中BPA类物质的毒性效应,实验采用四唑盐(MTS)比色法检测5种双酚A类化合物对人雌激素受体缺失乳腺癌细胞MCF-7(ER-)增殖活性的影响,2,4-二硝基苯肼法检测细胞乳酸脱氢酶(LDH)露出率,单细胞凝胶电泳(SCGE)检测DNA损伤.用非线性最小二乘法对MTS实验结果拟合剂量-效应曲线,表明所有的剂量-效应曲线(DRC)均能用Weibull或者Logit函数有效表征.以模型估算的半数效应浓度负对数值(pEC50)评估5种化合物的毒性大小依次为:BPB>BPC>TDP>BPE>BPA.LDH检测以及SCGE检测受试化合物对MCF-7(ER-)的损伤作用表明,在效应浓度EC20下,细胞核DNA轻微损伤,细胞增殖受轻微抑制;在效应浓度EC40下,细胞核DNA损伤严重,细胞增殖受到显著抑制,从而导致细胞膜通透性显著改变,使LDH大量露出.     

铁锰复合氧化物吸附活性黑染料的性能研究

采用高锰酸钾和硫酸亚铁反应制备铁锰复合氧化物,考察其吸附活性黑染料过程中的影响因素,并比较原位生成的和提前制备的铁锰复合氧化物的吸附性能。结果表明:铁锰复合氧化物对活性黑有较强的吸附能力,吸附过滤之后的去除率较高;染料废水中的硫酸根离子会降低去除率,而氯离子则无明显影响;染料废水的pH值对去除效果的影响较小;原位生成的铁锰复合氧化物的吸附容量大于预制的铁锰复合氧化物固体。通过傅里叶—红外光谱(FTIR)表征分析,推测出铁锰复合氧化物中丰富的表面羟基(Mn-OH、FeOOH官能团等)在吸附过程中起到了重要作用。     

关键参数对MBBR工艺生物膜活性的影响研究

对MBBR工艺处理工业园区废水的参数进行优化比较,重点测试了不同曝气量和水力停留时间下MBBR载体生物膜降解速率,测试并分析了生物膜活性的变化规律。结果表明,当曝气强度为350L/h,水力停留时间为12h,系统出水较优,COD去除率约为70.8%,NH3-N去除率约为91.7%,TN去除率约为38.3%。MBBR工艺表现出优异的氨氮去除效率,具备较高的同时硝化反硝化能力。生物膜活性影响分析表明,曝气量增大有利于生物膜耗氧活性和硝化活性提高,但其对反硝化活性有抑制作用;水力停留时间过大或过小均不利于生物膜保持高活性;综合分析表明,气水比约为50∶1,水力停留时间为12h时,系统生物膜耗氧活性和硝化反硝化活性较高。     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.