Metallic and bimetallic phosphides-based nanomaterials for photocatalytic hydrogen production and water detoxification: a review

Environmental Chemistry Letters - Providing sustainable energy and cleaning water pollution are actually major societal issues requiring new catalysts. In particular, transition...     

Performance evaluation of six different aerosol samplers in a particulate matter generation chamber

The present study was carried out with the aim of evaluating the performance of six different aerosol samplers in terms of mass concentration, particle size distribution, and mass fraction for the international size-sampling conventions. The international size-sampling criteria were defined as inhalable, thoracic, and respirable mass fractions with 50% cutoff at an aerodynamic equivalent diameter of 100 μm, 10 μm, and 4 μm, respectively. Two Andersen, four total suspended particulate (TSP), two RespiCon, four PM₁₀, two DustTrak, and two SidePak samplers were selected and tested to quantitatively estimate human exposure in a carefully controlled particulate matter (PM) test chamber. The overall results indicate that (1) Andersen samplers underestimate total suspended PM and overestimate thoracic and respirable PM due to particle bounce and carryover between stages, (2) TSP samplers provide total suspended PM as reference samplers, (3) TSP samplers quantified by a coulter counter multisizer provide no information below an equivalent spherical diameter of 2 μm and therefore underestimate respirable PM, (4) RespiCon samplers are free from particle bounce as inhalable samplers but underestimate total suspended PM, (5) PM₁₀ samplers overestimate thoracic PM, and (6) DustTrak and SidePak samplers provide relative PM concentrations instead of absolute PM concentrations.     

Combined sorptional–photocatalytic remediation of dyes by polyaniline Zr(IV) selenotungstophosphate nanocomposite

A polyaniline Zr(IV) selenotungstophosphate nanocomposite was prepared via sol-gel method and characterized by thermogravimetric analysis, scanning electron microscopy, energy dispersive X-ray spectroscopy, and transmission electron microscopy. The combined sorptional–photocatalytic activity of the nanocomposite for degradation of methylene blue and malachite green was investigated and was found to be more efficient than separate adsorption in the dark followed by photocatalysis. The dyes were degraded in 3 h by 96% and 89% by the combined process, as compared to 86% and 72% by the two-step process in 5 h. The nanocomposite material showed antimicrobial activity against Staphylococcus aureus and Escherichia coli.     

Effects of Instrument Precision and Spatial Variability on the Assessment of the Temporal Variation of Ambient Air Pollution in Atlanta,Georgia

Abstract

Data from the U.S. Environmental Protection Agency Air Quality System, the Southeastern Aerosol Research and Characterization database, and the Assessment of Spatial Aerosol Composition in Atlanta database for 1999 through 2002 have been used to characterize error associated with instrument precision and spatial variability on the assessment of the temporal variation of ambient air pollution in Atlanta, GA. These data are being used in time series epidemiologic studies in which associations of acute respiratory and cardiovascular health outcomes and daily ambient air pollutant levels are assessed. Modified semivariograms are used to quantify the effects of instrument precision and spatial variability on the assessment of daily metrics of ambient gaseous pollutants (SO₂, CO, NO_x, and O₃) and fine particulate matter ([PM_2.5] PM_2.5 mass, sulfate, nitrate, ammonium, elemental carbon [EC], and organic carbon [OC]). Variation because of instrument imprecision represented 7–40% of the temporal variation in the daily pollutant measures and was largest for the PM_2.5 EC and OC. Spatial variability was greatest for primary pollutants (SO₂, CO, NO_x, and EC). Population–weighted variation in daily ambient air pollutant levels because of both instrument imprecision and spatial variability ranged from 20% of the temporal variation for O₃ to 70% of the temporal variation for SO₂ and EC. Wind rose plots, corrected for diurnal and seasonal pattern effects, are used to demonstrate the impacts of local sources on monitoring station data. The results presented are being used to quantify the impacts of instrument precision and spatial variability on the assessment of health effects of ambient air pollution in Atlanta and are relevant to the interpretation of results from time series health studies that use data from fixed monitors.     

Evaluation of Trickle Bed Air Biofilter Performance as a Function of Inlet VOC Concentration and Loading,and Biomass Control

ABSTRACT

The 1990 Amendments to the Clean Air Act have stimulated strong interest in the use of biofiltration for the economical, engineered control of volatile organic compounds (VOCs) in effluent air streams. Trickle bed air biofilters (TBABs) are especially applicable for treating VOCs at high loadings. For long-term, stable operation of highly loaded TBABs, removal of excess accumulated bio-mass is essential. Our previous research demonstrated that suitable biomass control for TBABs was achievable by periodic backwashing of the biofilter medium. Backwashing was performed by fluidizing the pelletized biological attachment medium with warm water to about a 40% bed expansion. This paper presents an evaluation of the impact of backwashing on the performance of four such TBABs highly loaded with toluene. The inlet VOC concentrations studied were 250 and 500 ppmv toluene, and the loadings were 4.1 and 6.2 kg COD/m³ day (55 and 83 g toluene/m³ hr). Loading is defined as kg of chemical oxygen demand per cubic meter of medium per day. Performance deterioration at the higher loading was apparently due to a reduction of the specific surface of the attached biofilm resulting from the accumulation of excess biomass. For a toluene loading of 4.1 kg COD/m³ day, it was demonstrated that the long-term performance of biofilters with either inlet concentration could be maintained at over 99.9% VOC removal by employing a backwashing strategy consisting of a frequency of every other day and a duration of 1 hr.     

Ambient air quality during wheat and rice crop stubble burning episodes in Patiala

Open crop stubble burning events were observed in and around Patiala city, India. A ground level study was deliberated to analyze the contribution of wheat (Triticum aestivum) and rice (Oriza sativa) crop stubble burning practices on concentration levels of aerosol, SO₂ and NO₂ in ambient air at five different sites in and around Patiala city covering agricultural, commercial and residential areas. Aerosols were collected on GMF/A and QMF/A (Whatman) sheets for a 24 h period throughout the year in 2007. Simultaneously, sampling of SO₂ and NO₂ was conducted and results obtained during stubble burning periods were compared to the non-stubble burning periods. Results clearly pointed out a distinct increase in aerosol, SO₂ and NO₂ levels during the crop stubble burning periods.     

Development,Malaria and Adaptation to Climate Change: A Case Study from India

India has reasons to be concerned about climate change. Over 650 million people depend on climate-sensitive sectors, such as rain-fed agriculture and forestry, for livelihood and over 973 million people are exposed to vector borne malarial parasites. Projection of climatic factors indicates a wider exposure to malaria for the Indian population in the future. If precautionary measures are not taken and development processes are not managed properly some developmental activities, such as hydro-electric dams and irrigation canal systems, may also exacerbate breeding grounds for malaria. This article integrates climate change and developmental variables in articulating a framework for integrated impact assessment and adaptation responses, with malaria incidence in India as a case study. The climate change variables include temperature, rainfall, humidity, extreme events, and other secondary variables. Development variables are income levels, institutional mechanisms to implement preventive measures, infrastructure development that could promote malarial breeding grounds, and other policies. The case study indicates that sustainable development variables may sometimes reduce the adverse impacts on the system due to climate change alone, while it may sometimes also exacerbate these impacts if the development variables are not managed well and therefore they produce a negative impact on the system. The study concludes that well crafted and well managed developmental policies could result in enhanced resilience of communities and systems, and lower health impacts due to climate change.     

Assessment of vehicular pollution in Kolkata, India, using CALINE 4 model

Michigan water quality standards for public bathing beaches require local health departments to collect and analyze a minimum of three water samples for Escherichia coli during each sampling event. The geometric mean number of E. coli colonies is then compared to the 300 colonies per 100 ml standard to determine compliance. This article compares the results of the currently mandated procedure to a composite sampling method, whereby the three samples are mixed in equal volumes and analyzed once. This effectively replaces the geometric mean of the individual sample results with an arithmetic mean. Although arithmetic means are more affected by outliers, this sensitivity to high concentrations is more health conservative than the geometric mean. During the 2007 sampling season, nine bathing beaches were monitored once each week. Three individual point samples and a composite sample were analyzed for each sampling event. No statistically significant differences in bacteria concentrations were found between composite sample analysis and the arithmetic mean of individual point sample analyses. No violations were detected in the 2007 sampling season, so using historical data, a retrospective analysis was performed on samples gathered at nine bathing beaches in Kalamazoo County, Michigan during the years 2001–2007. The arithmetic mean of the three samples taken at each site served as a surrogate composite sample. The benefits of compositing the three samples were investigated assuming a 2/3 reduction in analytical costs. In the traditional sampling method, three individual samples were obtained and analyzed once in every 3-week period during the summer season, whereas compositing was simulated by taking the arithmetic mean of each week’s results. The results of this retrospective cost analysis indicates that ten to 14 violations would have been missed using the less frequent traditional sampling and analysis methodology. Composite sampling is a cost-saving alternative to traditional sampling techniques that can be more protective of public health, particularly when the savings are applied to increased numbers of samples in time or space.     

Uptake and translocation of metals in Spinacia oleracea L. grown on tannery sludge-amended and contaminated soils: effect on lipid peroxidation, morpho-anatomical changes and antioxidants

The plants of Spinacia oleracea L. grown on contaminated soil (CS) and different amendments of tannery sludge (TS) have shown high accumulation of metals in its edible part. The accumulation of toxic metal (Cr) in the leaves of the plants grown on CS was recorded as 40.67 microgg(-1)dw. However, the leaves of the plants grown on 100% TS have accumulated about two times (70.80 microgg(-1)dw) higher Cr than the 10% TS (31.21 microgg(-1)dw). Among growth parameters, the root length was more affected at 90 d than the shoot length, number of leaves and leaf area. The study of scanning electron micrographs showed 29.31% increase in stomatal length in the leaves of the plants grown on CS as compared to garden soil (GS), which served as control, however it decreased in the plants grown on higher amendments of TS. The decrease in MDA content at initial period of exposure and lower amendment was recorded in the leaves, whereas, significant increase (>10% TS onward) was observed with increase in tannery sludge ratio at 90 d as compared to GS. A coordinated increase in all the studied antioxidants (cysteine, non-protein thiol, ascorbic acid, carotenoid contents) was found up to 75 d of growth. At 90 d, most of the antioxidant decreased as compared to 75 d causing oxidative stress as evidenced by increased level of lipid peroxidation and decreased chlorophyll and protein contents. Maximum increase of 181.43% in MDA content and maximum decrease of 53.69% in total chlorophyll content was recorded in the leaves of the plants grown on 100% TS after 90 d of growth. The plants grown on CS have shown an increase in shoot length, number of leaves, leaf area, photosynthetic pigments and protein contents and in all the studied antioxidants. Thus, these plants are able to combat stress involving defense mechanism, resulting in healthy growth of the plants. The results are well coordinated as there is no change in the MDA content as compared to the plants grown on GS. In view of high Cr accumulation in edible part of S. oleracea grown on CS after irrigation with tap water, it is not advisable to use these plants for edible purposes. Summing up, it is recommended that the level of metals in the edible part should be checked instead of healthy growth as deciding parameter for consumption. It is demonstrated through this study that metal enriched plants have detoxification mechanism and grow well on organic matter enriched contaminated soil.     

Body Mass Index (BMI) as a first-line screening criterion for detection of excessive daytime sleepiness among professional drivers

OBJECTIVES: Obstructive sleep apnea (OSA) is the main predisposing factor of excessive daytime sleepiness (EDS), and, therefore, increases the risk of road crashes. However, it is difficult to rely on medical intake for OSA or fatigue since drivers' symptoms reports are not reliable. On the other hand, direct measurement of EDS among large numbers of drivers carries serious practical drawbacks. Obstructive sleep apnea, in turn, is strongly related to obesity, and elevated body mass index (BMI) is considered one of the major risk factors for OSA. Thus, it could be postulated that BMI may carry predictive value for EDS proneness. METHODS: The present study examined the interrelation between BMI, degree of OSA, as measured with Respiratory Distress Index (RDI), and the degree of EDS, as measured with the mean sleep onset latency in the Multiple Sleep Latency Test (MSLT) among obese (BMI = 32) professional drivers. The drivers went through polysomnography followed by the five sessions of MSLT in the next day. RESULTS: In accordance with prior studies, we have found strong correlation between BMI and the degree of OSA on the one hand, and between the degree of OSA and EDS on the other hand. OSA was detected among 77.7% of the drivers, 47.1% were sleepy, 19% had severe sleepiness [mean sleep latency [MSL < or = 5 min.], 28.1% had moderate sleepiness [MSL < or = 10 min.]. None of the drivers complained about any sleep problem, including snoring, and all reported that they do not experience excessive daytime sleepiness. Thus, there was no correlation between their subjective report and objective findings. CONCLUSIONS: Obese drivers with BMI above 32 are highly prone to be sleepy during the day. Their subjective reports of OSA or fatigue symptoms are not reliable. Therefore it is highly recommended to screen them easily by weight and height measure for further sleep study and decision about their driving abilities.