盘式曝气器的结构优化设计

盘式曝气器是目前城市污水处理厂主要采用的曝气设备之一。但目前盘式曝气器存在充氧能力低、阻力损失大、使用寿命短等技术问题，增加了城市污水处理厂运行成本，降低了运行效能。针对这些问题，对盘式曝气器进行了结构优化设计。通过结构优化，既改善了曝气器的抗撕裂性和自闭性，同时叉提高了充氧能力，降低了曝气阻力损失。     

石龙芮与酸模处理生活污水实验研究

运用无土栽培技术,通过石龙芮和酸模对生活污水的降解实验,对两种植物作为湿地植物处理生活污水的可行性进行了实验分析。实验表明两种植物对污水中的营养元素都具有较好的去除,N、P元素的最终去除率都能达到80％,石龙芮对COD的去除达到45％左右,而酸模对COD的去除可达50％。相对于单一植物系统来说,石龙芮一酸模复合植物系统可对生活污水中的P元素和COD的去除更高。研究表明石龙芮和酸模都可以作为人工湿地植物,用来处理生活污水,而两种植物都具有耐寒性,可以提高人工湿地在冬季的运行效率。     

Formation,antimicrobial activity,and biomedical performance of plant-based nanoparticles: a review

Environmental Chemistry Letters - Because many engineered nanoparticles are toxic, there is a need for methods to fabricate safe nanoparticles such as plant-based nanoparticles. Indeed, plant...     

北江河水中抗生素抗性基因污染初步研究（Preliminary Studies on the Pollution Levels of Antibiotic Resistance Genes in the Water of Beijiang River, South China）

环境中细菌的耐药性,尤其是对抗生素的耐药性已成为影响生态环境的重要因素.论文采用抗生素抗性平板法调查了北江河水中四环素、红霉素及磺胺类这3类抗生素耐药性细菌的存在,采用定性PCR及荧光定量PCR方法分别研究了该水域sul1和sul2这2种磺胺类抗生素抗性基因(ARGs)的存在和含量水平.结果表明,所采集北江水域的9个样品中有5个对四环素有耐药性,7个对红霉素有耐药性,8个对磺胺二甲嘧啶有耐药性;定性PCR实验并经基因测序结果证实,5个样品含有sul1,4个样品含有sul2.进一步的PCR定量分析结果显示,7个样品中均检出sul1和sul2磺胺抗性基因,它们与内对照基因16S-rRNA表达量比值分别在10-2.56~10-0.52及10-3.25~10-1.24范围内,该结果显著高于美国科罗拉多州北部河流的研究结果.此外,数据分析也发现,sul1和sul2磺胺抗性基因的含量水平与该区域水中磺胺含量分布具有一定的相关性,表明外源性抗生素对河流的污染是诱导抗性基因的重要因素.     

广东省应急响应对空气质量的影响特征

通过收集广东省21个地级市2016年1月1日～2020年12月31日的空气质量日数据,选择PM2.5、PM10、NO2和O3为空气质量代表指标,采用固定效应计量模型,分析广东省突发公共卫生事件应急响应对空气质量的影响特征.结果发现,与无应急响应等级时期相比,各应急响应等级下PM2.5、PM10和NO2浓度下降幅度范围分...     

石化厂污水反渗透浓水的催化臭氧氧化处理

针对某炼油厂二沉池出水回用过程中产生的反渗透浓水高盐、高硬、低COD和可生化性差的特点,采用催化臭氧氧化工艺处理,出水达标排放.实验确定了对臭氧氧化催化效果最好的催化剂,合适的反应条件为:反应时间大于30 min,臭氧质量浓度15-30 mg/L.经催化臭氧氧化处理后,反渗透浓水的COD降低至60 mg/L以下,满足排放要求,同时反渗透浓水可生化性提高.     

出水水头对自生生物动态膜过滤性能的影响

增加出水水头不利于自生生物动态膜(SFDM)的恢复.随着恢复期出水水头的增加,SFDM的稳定出水通量逐渐达到一个极限通量,约为35L·(m²·h)^-1.继续增大出水水头,稳定出水通量甚至有降低的趋势在相同的出水通量下,动态膜的稳定运行时间随着恢复期出水水头的增加而显著降低.当恢复期出水水头为0.5cm时,稳定运行的时间＞10d,当恢复期出水水头为10cm时,稳定运行时间＜5h.研究了产生上述现象的原因,并提出使每个过滤周期从出水水头为0处开始的操作策略.     

端烯丙基苯并15-冠-5接枝壳聚糖对金属离子的吸附性能

将３’－端烯丙基苯并１５－冠－５和４’－端烯丙基苯并１５－冠－５接枝到壳糖或交联壳聚糖上,合成了４种新新型的壳聚糖冠醚,并研究了这４种壳聚糖冠醚对Ｐｄ＾２＋、Ｃｕ＾２＋、Ｈｇ＾２＋的静态吸附性能。结果表明,这４种吸附剂对Ｐｄ＾２＋具有良好的吸附性能,并能在Ｃｕ＾２＋和Ｈｇ＾２＋共存的条件下选择吸附Ｐｄ＾２＋。     

Prediction of high-density polyethylene pyrolysis using kinetic parameters based on thermogravimetric and artificial neural networks

● Reducting the sampling frequency can enhance the modelling process. ● The pyrolysis of HDPE was investigated at three different heating rates. ● The average E_a and k₀ were calculated by Friedman, KAS, FWO, and CR methods. ● ANN was employed to predict the HDPE weight loss with the optimal MSE and R². Pyrolysis is considered an attractive option and a promising way to dispose waste plastics. The thermogravimetric experiments of high-density polyethylene (HDPE) were conducted from 105 °C to 900 °C at different heating rates (10 °C/min, 20 °C/min, and 30 °C/min) to investigate their thermal pyrolysis behavior. We investigated four methods including three model-free methods and one model-fitting method to estimate dynamic parameters. Additionally, an artificial neural network model was developed by providing the heating rates and temperatures to predict the weight loss (wt.%) of HDPE, and optimized via assessing mean squared error and determination coefficient on the test set. The optimal MSE (2.6297 × 10⁻²) and R² value (R² > 0.999) were obtained. Activation energy and pre-exponential factor obtained from four different models achieves the acceptable value between experimental and predicted results. The relative error of the model increased from 2.4 % to 6.8 % when the sampling frequency changed from 50 s to 60 s, but showed no significant difference when the sampling frequency was below 50 s. This result provides a promising approach to simplify the further modelling work and to reduce the required data storage space. This study revealed the possibility of simulating the HDPE pyrolysis process via machine learning with no significant accuracy loss of the kinetic parameters. It is hoped that this work could potentially benefit to the development of pyrolysis process modelling of HDPE and the other plastics.     

压力溶气气浮工艺中溶气效率测定方法述评

气浮工艺中溶气效率高低直接影响到回流水量的大小 ,即决定着运行费用的高低。对气浮工艺设计者和运营者来讲 ,达到并维持较高溶气效率是优先考虑的问题 ,而对新型气浮设备研发者而言 ,了解并确定其在不同工况下的溶气效率也是至关重要的。就已有溶气效率的测定方法进行了分类介绍与评价。