Control strategy of shortcut nitrification

Shortcut nitrification for ammonium-rich wastewater is energy-saving and cost-effective procedure that has become one of the hotspots in the field of biological denitrogenation. An orthogonal experiment was performed to study the combined effects of operational parameters on the performance of internal-loop airlift bioreactor for shortcut nitrification. The optimum operational parameters for the shortcut nitrification were fotmd as temperature 35 ℃, pH 8.0, dissolved oxygen concentration 1.0 mg/L, ammonium concentration 4 mmol/L and HRT 16 h, which have different influence on the performance of shortcut nitrification reactor. The pH, temperature and dissolved oxygen concentration have significant bearing on the process. The results showed that the shortcut nitrification reactor could be successfully started up within 42 d, and the reactor performance is steady with minimum NO2-/NOx- of 85.2%, maximum 93.4% and average value of 91.4% in effluent. Based on the analysis of experimental data, a new control strategy named “priority ＋ combination” for shortcut nitrification was suggested. Through this strategy, the startup and operation of shortcut nitrification for ammonium-rich sludge digester liquids were optimized. The control strategy works well to keep the reactor operation in steady state and in achieving high-efficiency for shortcut nitrification.     

EQUIVALENCE BETWEEN TOPMODEL AND THE NRCS CURVE NUMBER METHOD IN PREDICTING VARIABLE RUNOFF SOURCE AREAS1

An equivalence is proposed between two rainfall‐runoff methods with a long history of use in the United States and Europe. In watersheds where variable source areas dominate runoff, the two methods can have comparable probability distribution functions of moisture deficit, and therefore predict similar saturated runoff source areas. A novel approach is introduced to determine the S parameter in the Natural Resources Conservation Service (NRCS) method. This approach constrains S by the physical soil and topography characteristics of the catchment and depth to water table. The NRCS curve number method is at the core of many rainfall‐runoff models in hydrology. As a simple lumped parameter method, it is often scrutinized because it is not obvious how to derive S from catchment hydromorphological characteristics. The novel approach provides a clear physical meaning for S, allowing better estimation of this parameter in humid shallow water table environments where the variable source area can be the dominant runoff mechanism.     

Health risk assessment and oxidative stress in workers exposed to welding fumes

The aim of this study was designed to determine the influence of welding fumes on oxidative stress in humans and the role of metals. A questionnaire was designed to collect information regarding personal characteristics, including age, weight, height, and medical history; life style such as smoking status and exercise habits; and occupational history such as working history, working environment, employment duration, and use of protective equipment. Body mass index (BMI) in kg/m² was then calculated for each participant. Blood samples were also drawn to determine malondialdehyde (MDA) levels and various metals in plasma. Significantly higher plasma MDA (4.08 µg/L) was observed as compared to controls (1.61 µg/L). Blood metal analysis also showed elevated level of metals in welders for cadmium, chromium, lead,and nickel. Data indicated that workers occupationally exposed to welding fumes for prolong periods possessed higher metal levels associated with increased oxidative stress as evidenced by elevated MDA levels.     

Alteration of body total antioxidant capacity and thiol molecules in human chronic exposure to aluminum

The physiological role of aluminum (Al) is not yet known. Exposure to Al may cause many human disorders. The aim of this study was to explore how occupational human exposure to Al might affect the body oxidative stress. The relation between Al toxicity and oxidative stress was studied in blood samples obtained from 45 primary Al production workers, with a minimum work history of three years in the age range of 29–52 years. They were evaluated for oxidative stress biomarkers including thiobarbituric acid reactive substances (TBARS) indicator of lipid peroxidation, ferric reducing ability of plasma (FRAP) indicator of total antioxidant capacity, total thiol molecules and Al level in blood. The results showed that workers have significantly higher blood Al levels and concomitant lower blood FRAP and total thiol molecules in comparison to controls. Smokers had lower total thiol molecules than non-smokers. The subjects who had a previous history of disease had lower FRAP levels. It is concluded that Al induces oxidative stress in primary Al production workers. Supplementation of workers with antioxidants may have beneficial effects.     

Heterogeneous photocatalysis for removal of microbes from water

Increasing water pollution by microbes has become a source of serious health concern across the globe. Production of potentially carcinogenic disinfection by-products has marred credibility of traditional water purification techniques like chlorination. Photocatalysis has emerged as a promising alternative technique for the disinfection of water with minimal risk of harmful by-products. The process involves a wide band gap semiconductor material which, upon irradiation of light, produces electrons and holes with high redox potential to degrade organic contaminants and microbes. In this review, we analyze the research trends in photocatalytic inactivation of water borne microorganisms. This report analyzes the major factors that affect the disinfection efficiency using this process. The discussion also includes plausible mechanisms of microbial degradation as well as a kinetic model of the inactivation process. Different approaches, like doping of semiconductors or energy band engineering or plasmon coupling, have been reported for the enhancement and utilization of ambient solar light. Photocatalysis could be a cost-effective and environmentally friendly water purification technique though further research is required to enhance its efficiency with the use of solar light.     

Oral administration of potassium bromate, a major water disinfection by-product, induces oxidative stress and impairs the antioxidant power of rat blood

Potassium bromate (KBrO₃) is a widely used food additive, a water disinfection by-product and a known nephrotoxic agent. The effect of KBrO₃ on rat blood, especially on the anti-oxidant defense system, was studied in this work. Animals were given a single oral dose of KBrO₃ (100 mg/kg body weight) and sacrificed 12, 24, 48, 96 and 168 h after this treatment. Blood was collected from the animals and separated into plasma and erythrocytes. KBrO₃ administration resulted in increased lipid peroxidation, protein oxidation, hydrogen peroxide levels and decreased the reduced glutathione content indicating the induction of oxidative stress in blood. Methemoglobin levels and methemoglobin reductase activity were significantly increased while the total anti-oxidant power was greatly reduced upon KBrO₃ treatment. Nitric oxide levels were enhanced while vitamin C concentration decreased in KBrO₃ treated animals. The activities of major anti-oxidant enzymes were also altered upon KBrO₃ treatment. The maximum changes in all these parameters were 48 h after the administration of KBrO₃ and then recovery took place. These results show for the first time that KBrO₃ induces oxidative stress in blood and impairs the anti-oxidant defense system. Thus impairment in the anti-oxidant power and alterations in the activities of major anti-oxidant enzymes may play an important role in mediating the toxic effects of KBrO₃ in the rat blood. The study of such biochemical events in blood will help elucidate the molecular mechanism of action of KBrO₃ and also for devising methods to overcome its toxic effects.     

Former DDT factory in Pakistan revisited for remediation: severe DDT concentrations in soils and plants from within the area

A factory in Amman Garh near Nowshera, Khyber Pakhtunkhwa, Pakistan, produced dichlorodiphenyltrichloroethane (DDT) from 1963–1994. Consequently, earlier papers reported a soil contamination in the per mille range inside the former factory wall (88 m?×?106 m) and up to 10 mg/kg of DDT in the surroundings in 2005–2007. The site within the factory wall was remonitored systematically in 2011 to complement the earlier data as a prerequisite for remediation, to put them in exposure context in a population developing area, and to suggest and evaluate the optimal remediation technique for the site. The contamination was drastically higher than the earlier published data, and the sum of DDT and its metabolites (ΣDDT) was up to 65 % in the soil. Grasses, shrubs, and trees growing in this severely contaminated site had 50–450 mg/kg_dw of ΣDDT. Thus, people living nearby and husbandry as well as wild animals are heavily exposed to DDT. The semiarid climate favors wind drift and deposition of the pollutant. Additionally, DDT from products of herbivore animals feeding on the contaminated plants will enter the food web. To overcome the exposure and distribution of the DDT, the site within the factory wall was capped with 1.5 m of soil. This remediation technique represents the easiest and least expensive solution. Nevertheless, DDT can still evaporate or leach, and groundwater can rise in this flood-prone area and thereby become contaminated, especially because a binding layer is missing.     

MODELING RUNOFF FROM VARIABLE SOURCE AREAS IN HUMID,SHALLOW WATER TABLE ENVIRONMENTS1

ABSTRACT: Variable Source Areas (VSAs) are zones with water saturated soils in forested wetlands fringing streams and creeks. Runoff from these areas is generated by saturation excess after a shallow water table rises and inundates the ground surface. In humid regions, like Florida and the Southeast, VSAs are believed to produce most of the runoff in shallow water table environments. Modeling the spatial extent and temporal fluctuation of a VSA is difficult because the formation of a VSA depends on a number of hydrological and morphological factors like rainfall intensity, soil texture, water table depth, and topographic attributes of the terrain. In this paper, we couple a digital elevation model with a two‐dimensional variable saturation model to illustrate the formation of a VSA at the hillside scale. The topography derived from the digital elevation model forms the upper domain geometry for the two‐dimensional finite element simulations of variable saturated flow. The objectives are: (1) to model the spatial and dynamic fluctuation of a VSA, and (2) to understand the roles of rainfall variability and terrain attributes on the formation of a VSA. Results show that hillsides with shallow water table depths, low saturated hydraulic conductivity, mild slopes, and concave slope curvature were more susceptible to runoff from a variable source. Runoff from a variable source showed little sensitivity to rainfall intensity. In general, landscapes with steep slopes generated a small VSA and a seepage face that vanished rapidly with time. In contrast, flat terrains are more amenable to VSA and retain ground surface inundation for longer periods of time.     

Comparison of mechanical pretreatment methods for the enhancement of anaerobic digestion of pulp and paper waste activated sludge

The conventional anaerobic digestion process, requiring long solids retention times (SRTs) to digest solids, is currently viewed as impractical for the pulp and paper industry because of high capital costs associated with the construction of new digesters. Recent developments in sludge solubilization technology could be promising in reducing digester size, which also allows for the potential use of decommissioned tanks, both of which can reduce the capital cost. Three pretreatment technologies for use with anaerobic digestion were tested on laboratory-scale to investigate their feasibility. The SRTs in all three digesters systematically decreased from 20 to 3 days. The reference digester was fed waste activated sludge (WAS) to serve as the control at the same SRTs. The other digesters were fed WAS that had been preconditioned using mechanical shearing, sonication, or high-pressure homogenization technology. Anaerobic digestion with high-pressure homogenization produced as much methane at 3-day mean SRT as that from the reference digester operated at 20-day SRT. Therefore, a new digester can theoretically be 85% smaller than a conventional digester. An added benefit of WAS to methane conversion is the recovery of nutrients nitrogen and phosphorus.