Detection and removal of heavy metal ions: a review

Environmental Chemistry Letters - In aqueous systems, heavy metal ions, when present in excess than permissible limits, are dangerous for human beings and aquatic life. Heavy metals cannot be...     

A case study of spatial variation and enrichment of selected elements in ambient particulate matter around a large coal-fired power station in Central India

The dominant use of coal in power sectors has been associated with adverse environmental impacts. Ambient air monitoring for the two size fractions of particulate matter, respirable suspended particulate matter (RSPM) and non-respirable suspended particulate matter (NRSPM) in the downwind and upwind directions of a large coal-fired power station in central India, was carried out. Collected samples of ambient particulate matter were analysed atomic absorption spectrophotometrically for 15 elements. Spatial variability in elemental composition of RSPM and NRSPM and the degree of enrichment of these toxic metals in RSPM were investigated. A significant spatial variability for the elements in RSPM and NRSPM and higher degrees of enrichment of the elements were observed.     

Toxic metals status in human blood and breast milk samples in an integrated steel plant environment in Central India

Owing to its unique nutritional and immunological characteristics, human milk is the most important food source for infants. Breast milk can, however, also be a pathway of maternal excretion of toxic elements. Selected toxic elements (As, Pb, Mn,a Hg and Cd) were determined in human breast milk and blood samples obtained from 120 subjects related to an integrated steel plant environment located in central India. Samples of breast milk and blood from subjects living outside the steel plant environment were also analyzed for comparative study. Higher levels of these toxic elements were found in blood samples as compared to breast milk samples. Plant workers showed the higher presence of these metals in their breast milk and blood samples compared to the residents of the area and the subjects living outside the industrial environment, respectively. Mn, Pb and Hg have shown a higher tendency to associate with blood and breast milk than As and Cd. The order of occurrence of these metals in blood and milk samples thus found is Mn > Pb > Hg > As > Cd.     

Solubilisation effect of spent wash on oxide-ores of manganese and iron

Samples of iron ore (haematite) and manganese ore (pyrolusite) of known compositions were equilibrated with aliquots of analysed sample of spent wash. The concentrations of iron(II), iron(III), complexed iron, manganese(II) ions and complexed Mn-ions were determined after increasing durations. One litre of the spent wash was found to extract out 141 mg of total iron and 161 mg of total manganese. In case of iron, the predominance was of iron(II) (92%), whereas in case of manganese it was of the complexed form (95%).     

Rate evaluation of marble damage by SO2-acidity in the vicinity of stacks

A laboratory modelling for the assessment of damage to marble by the SO₂-acidity in the vicinity of stacks has been devised. The modelling is based on the role of metal oxide particulates (also emitted by smoke-stacks) which catalytically convert SO₂ to SO₃ forming H₂SO₄ (in presence of water), which has an excessively high selectivity, compared with HNO₃, for corroding marble. The requisites of the modelling are: (1) determination of composition of the marble, (2) immersion of samples of marble blocks (after measurement of surface areas) in H₂SO₄ solutions of known concentrations, maintaining pH and temperature at their initial values, (3) determination of concentrations of Ca and Mg (major components of marble) in the leachate, and thereby evaluating the mass loss of the marble, in terms of mg marble cm^–2 day^–1, for each level of H₂S0₄ concentration, (4) application of derived data for evaluation of duration (in years) for the decay of 1 cm thickness of marble block by the process of surface corrosion. From the modelling, it was found that the duration for the damage of 1 cm thickness of the marble sample used here by SO₂ acidities of 1, 5, 10, 50 and 100 ppm are 83.01, 69.02, 31.24, 8.19 and 4.31 years respectively.     

Source apportionment of personal exposure of fine particulates among school communities in India

Source contribution estimates (SCE) of school community personal Respirable Particulate Matter (RPM) have been investigated. Reported relationships of personal RPM with Ambient-outdoors and indoor RPM levels have given the concept of defining the sources of personal exposure. Ambient-outdoors, indoors, soils and local road- traffic dusts were identified as main routes and principal sources of fine particulates at personal exposure levels. Fifteen subjects (05 from each of three schools) were selected from previous conducted study of interrelationships among classified atmospheric receptors in theses schools located in Bhilai-Durg, District Durg, India. Samples of RPM collected from identified receptors and sources were analyzed for selected chemical constituents and the chemical data has been utilized in preparation of source-receptor profiles. Chemical mass balance (CMB8) model has been used for source apportionment study. Major dominating source is ambient-outdoors in case of school located near to steel plant downwind. Indoors and road-traffic dusts have also played dominating role in case of school located near to National Highways. Indoor ventilation properties have played an important role in source contribution estimates.     

Temporal and spatial variations of PM2.5 organic and elemental carbon in Central India

Environmental Geochemistry and Health - This study describes spatiotemporal patterns from October 2015 to September 2016 for PM2.5 mass and carbon measurements in rural (Kosmarra), urban (Raipur),...     

Antimony (Sb) – pollution and removal techniques – critical assessment of technologies

In view of increasing emissions of antimony (Sb) into the environment due to industrialization and consequent carcinogenicity, it is essential to remove this metal from the ecosystem. Antimony and arsenic (As) are analogs. Although numerous studies examined arsenic removal, few reports are available on Sb removal. In this review, various Sb removal techniques are described to understand how this process occurs and what research gaps are needed to improve efficiency. At present, surface adsorption technique is the most widely used for Sb removal. Biological treatment namely phytoremediation is also a promising method and more investigations are required in this regard. The selection of a suitable technique for a given area depends on the conditions including economic, environmental, and social conditions.     

A case study of spatial variation and enrichment of selected elements in ambient particulate matter around a large coal-fired power station in Central India

The dominant use of coal in power sectors has been associated with adverse environmental impacts. Ambient air monitoring for the two size fractions of particulate matter, respirable suspended particulate matter (RSPM) and non-respirable suspended particulate matter (NRSPM) in the downwind and upwind directions of a large coal-fired power station in central India, was carried out. Collected samples of ambient particulate matter were analysed atomic absorption spectrophotometrically for 15 elements. Spatial variability in elemental composition of RSPM and NRSPM and the degree of enrichment of these toxic metals in RSPM were investigated. A significant spatial variability for the elements in RSPM and NRSPM and higher degrees of enrichment of the elements were observed.     

Residues of endosulfan in cotton growing area of Vehari,Pakistan: an assessment of knowledge and awareness of pesticide use and health risks

This study is based on self-reported information collected from selected farmers of Vehari District, Punjab, Pakistan, to determine their technical knowledge and awareness about pesticide use and associated environmental and health risks. Moreover, soil contamination by routinely used persistent organochlorine pesticide, endosulfan, was also evaluated. Survey data revealed very low literacy rate (on an average 9th grade education) and technical knowledge (almost missing) of the farmers in Vehari District. The farmers are unable to fully read and understand the instructions about the use of pesticide marked on the containers. They are not fully aware of pesticide persistence and toxicity (73%), unable to identify cotton pests and diseases (86%), and do not know which crop to grow in cotton adjacent fields (100%). Data also revealed that the farmers (100%) do not follow safety measure during pesticide application and are unaware of pesticide toxicity symptoms in human as well as the basic first-aid practices (89%).

Poor literacy rate and lack of technical knowledge of farmers in Vehari regarding pesticide use and handling are posing serious environmental and health risks among the local inhabitants, particularly among farmers. Soil analysis results showed that concentration of α- and β-endosulfan ranged from 0–14 to 0–14.64 μg/mg, respectively. Principal component analysis showed that soil organic matter is the key soil parameter controlling the occurrence and fate of endosulfan under sandy loam soil conditions of Vehari District. There is a serious need of improving technical and environmental knowledge of farmer about pesticide risks on human health in the studied area, in particular, and the entire country in general. Findings are of great use for policymaking in Pakistan to minimize pesticide risks in Pakistan.