短程硝化颗粒污泥的快速培养与硝化特性研究

以城市污水处理厂剩余污泥为种泥,以2 min沉淀时间为选择压,在序批式反应器(SBR)中快速培养出好氧颗粒污泥。经过60个周期(20 d),反应器内出现砂粒状颗粒,并持续稳定运行120 d。成熟的颗粒污泥平均粒径856.56μm,具有良好的硝化性能。SBR反应器以固定曝气时间方式运行,亚硝酸盐积累率达80%以上,实现了稳定短程硝化。试验结果表明:絮体污泥(即接种污泥)与颗粒污泥的硝化过程相似但略有差异。二者差别在于,氨氮氧化结束后,继续曝气120 min,絮体污泥将亚硝酸盐完全转化为硝酸盐,而颗粒污泥仅将部分亚硝酸盐转化且过程比较缓慢。     

不同曝气强度下SBR系统污染物去除及N_2O排放研究

为考察曝气强度对SBR(A/O)系统N2O产生量的影响,试验采用人工合成废水长期驯化2个月后的污泥,分别考察了在0.2,0.4,0.6L/min三个曝气强度下对污染物的去除情况及N2O的产生情况。结果表明:在三种曝气强度下磷酸盐的平均去除率均可达95%⁹8%,低曝气强度下N2O释放量明显高于中等曝气强度,高曝气强度下N2O释放量最大,0.4L/min曝气强度下污染物去除率最好N2O释放量低,因此确定为最佳曝气强度。     

活性炭吸附法处理冶金废水的工程设计模型

以博哈特(Bohart)和亚当斯(Adams)方程为推导依据,结合连续进水活性炭模型实验,证明了活性炭吸附法处理冶金废水的可行性,且得出了活性炭吸附高度、工作周期、污染物去除率等重要设计参数之间的关系,为活性炭的工程设计提出了一套有效的参考计算方法和设计程序。     

Biodegradation of 2-methylquinoline by Enterobacter aerogenes TJ-D isolated from activated sludge

Bacterial strain Enterobacter aerogenes TJ-D capable of utilizing 2-methylquinoline as the sole carbon and energy source was isolated from acclimated activated sludge under denitrifying conditions. The ability to degrade 2-methylquinoline by E. aerogenes TJ-D was investigated under denitrifying conditions. Under optimal conditions of temperature (35℃) and initial pH 7, 2-methylquinoline of 100 mg/L was degraded within 176 hr. The degradation of 2-methylquinoline by E. aerogenes TJ-D could be well described by the Haldane model (R² > 0.91). During the degradation period of 2-methylquinoline (initial concentration 100 mg/L), nitrate was almost completely consumed (the removal efficiency was 98.5%), while nitrite remained at low concentration (< 0.62 mg/L) during the whole denitrification period. 1,2,3,4-Tetrahydro-2-methylquinoline, 4-ethyl-benzenamine, N-butyl-benzenamine, N-ethyl-benzenamine and 2,6-diethyl-benzenamine were metabolites produced during the degradation. The degradation pathway of 2-methylquinoline by E. aerogenes TJ-D was proposed. 2-Methylquinoline is initially hydroxylated at C-4 to form 2-methyl-4-hydroxy-quinoline, and then forms 2-methyl-4-quinolinol as a result of tautomerism. Hydrogenation of the heterocyclic ring at positions 2 and 3 produces 2,3-dihydro-2-methyl-4-quinolinol. The carbon-carbon bond at position 2 and 3 in the heterocyclic ring may cleave and form 2-ethyl-N-ethyl-benzenamine. Tautomerism may result in the formation of 2,6-diethyl-benzenamine and N-butyl-benzenamine. 4-Ethyl-benzenamine and N-ethyl-benzenamine were produced as a result of losing one ethyl group from the above molecules.     

Photocatalytic activity of TiO2 containing anatase nanoparticles and rutile nanoflower structure consisting of nanorods

A series of TiO2 with different crystal phases and morphologies was synthesized via a facile hydrothermal process using titanium nbutoxide and concentrated hydrochloric acid as raw materials. The photocatalytic activity of the samples was evaluated by degradation of Methyl Orange in aqueous solution under UV-Visible light irradiation. On the basis of detailed analysis of the characterizing results of high-resolution transmission electron microscopy, X-ray powder diffraction measurements, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller measurement, it was concluded that the photo-activity of the catalyst is related directly to the 3D morphology and the crystal phase composition. An excellent catalyst should have both a futile 3D flower-like structure and anatase granulous particles. The 3D flower-like structure could enhance light harvesting, as well as the transfer of reactant molecules from bulk solution to the reactive sites on TiO2. In addition, the optimum anatase/rutile phase ratio was found to be 80：20, which is beneficial to the effective separation of the photogenerated electron-hole pairs.     

Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

基于阳离子树脂的Fenton非均相催化剂制备及性能测试

采用阳离子交换树脂颗粒为催化剂载体采用浸渍法负载二价铁离子,制备出非均相Fenton反应催化剂,并用该非均相Fenton催化剂氧化脱色亚甲基蓝溶液,考察其催化性能。实验结果表明:制备催化剂时最佳FeSO4浓度为16.67 mmol/L,pH=3.0,H2O2初始浓度为46.6 mmol/L,反应时间为30 min的条件下,亚甲基蓝溶液初始浓度为0.028 mmol/L时,亚甲基蓝溶液在非均相Fenton催化氧化过程中,其脱色率可达92.9%。采用序批形式反应使用5次后,该非均相催化剂仍有良好的催化效果,反应30 min后亚甲基蓝溶液脱色率仍可达85.2%,拓宽了Fenton技术的使用范围。     

γ-Fe_2O_3/膨胀石墨复合材料吸附废水中六价铬的应用研究

介绍了采用溶胶凝胶法合成新型的复合材料-磁性的γ-Fe_2O_3膨胀石墨(MEG)复合材料。通过采用X-射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)以及X-光电子能谱仪(XPS)对该复合材料MEG进行了表征,结果表明MEG中γ一Fe_2O_3的粒径约为50nm,而且其中γ一Fe_2O_3和膨胀石墨通过C=O相互作用。复合材料MEG作为新型的六价铬吸附剂,通过吸附时间、初始溶液的pH值以及再生性对该吸附过程进行了考察。结果表明:在40 min内MEG吸附六价铬的过程基本达到平衡;在初始溶液的pH为3.5时,MEG对六价铬的最大吸附量可以达到16.4mg/g;而且该复合材料MEG重复使用3次后吸附效果基本没有下降。因此,复合材料MEG对于废水中六价铬的处理有选择性吸附作用,而且初始溶液的pH值对其吸附过程起着重要作用。     

基于LandsatTM数据的济宁市水体识别方法研究

文章基于济宁市2009年LANDSAT TM影像,根据影像各波段间的相关性和地物在各影像上的灰度差异,分别采用单波段阈值法、多波段谱间关系法、改进的水体指数法(MNDWI)及HIS空间水体提取模型法对济宁市水体信息进行识别提取。在此基础上,结合归一化指数法和HIS空间水体提取模型,提出了一种综合性的水体信息提取方法,并对各方法提取结果进行了精度评价。结果表明,已有方法对济宁市水体识别存在一定的缺陷,而综合法集成了归一化指数法和HIS空间水体模型的优点,很好地弥补了已有方法的不足,对济宁市水体信息进行了较好的提取,尤其是细小水体,同时也很好地消除了建筑物、阴影、水生植被等的影响,提高了济宁市水体信息识别的精度,为更好地定量评价济宁市地表水体时空演变规律等提供帮助。     

渭南市大气环境容量计算及控制对策研究

以修正A值法估算渭南市大气环境容量,为渭南市大气总量控制提供科学依据。以箱模型为基本模型,利用陕西省气象台整编的1961-2008年气象资料,推导出宏观总量控制修正A值法,除韩城市、潼关县、浦城县、白水县和富平县A值大于国标A值,其余渭南各市县A值小于国标A值。在新空气质量标准标准的要求下,渭南市SO2、NOx、PM10环境容量分别为19.55×104t/a、10.50×104t/a和18.97×104t/a。为了保证各分区的环境质量,中架点源排放量与低源排放量之和应小于各分区容量,韩城市应注意改善中、低源NO x排放,其它区县NO x剩余容量有限,在严格的新空气质量标准的要求下,应加强对各区县中架点源与低架源的NO x控制,重点控制水泥行业、炼焦业和机动车的NO x排放。从整个城市考虑,从整个渭南市污染源排放来看,SO2总体排放量超过环境容量12.917×104t/a,NO x总体排放量超过环境容量8.016×104t/a,为了减少其对周边城市的影响,应提高火电厂脱硫效率,重点加快电厂脱硝设施建设。