Safety assessment of the film boiling chemical vapor infiltration (FB-CVI) process through a system-theoretic accident model and process (STAMP)

Film boiling chemical vapor infiltration (FB-CVI) is considered as one of the fastest process methodologies for manufacturing carbon-carbon (C–C) composite products and possesses various advantages compared to conventional methodologies. However, there are safety concerns associated with this process for large-scale manufacturing, mainly owing to the intrinsic nature of the precursor and the process conditions. Considering the multifunctional interactions of the various systems during the process, a system-theoretic process analysis (STPA)/system theoretic accident model and process (STAMP) model is used to perform a safety analysis of the hazardous states of the FB-CVI process at the system level. As a case study, the FB-CVI process equipment employed for the manufacturing of C–C composites is considered. The safety constraints present in the system are assessed for adequacy through a hazard analysis by STPA/STAMP. The analysis through STPA/STAMP demonstrated the capability to create proactive strategies for the design and realization of process equipment that can be employed to manufacture C–C composite products through the FB-CVI process.     

安全评价方法在危险废物处置环境风险评价中的应用探讨

对安全评价方法在危险废物处置建设项目环境风险评价中的运用进行初步探索。主要用"工艺过程风险因素分析表"对工艺过程潜在风险性识别;用蒙德法进行源项分析;用池火灾模型、蒸气云爆炸伤害模型对易燃、易爆物质的火灾、爆炸等重大事故后果进行计算,得出人员的伤亡半径和财产损失半径等参数,以便于判断风险的可接受水平。分析结果表明:采用安全评价方法对危险废物处置建设项目进行环境风险评价是适用的、可行的。     

北山地区大气降水中水化学及稳定同位素特征

为揭示甘肃北山地区大气降水的水化学及同位素特征,利用2012~2019年度采集的97件大气降水样品,采用相关性分析,富集因子,气团后向轨迹分析等多种方法对北山地区稳定同位素变化特征及其影响因素,降水中主要离子变化特征,不同离子来源及贡献,水汽来源进行了分析.结果表明,北山地区区域降水线的斜率与截距均高于张掖地区大气降水线;该区降水中稳定同位素比率明显受季节性,温度和高程效应的影响,在年尺度下,降雨量效应不明显;该区降水中氘盈余变化较大,雨季降水中氘盈余显著小于旱季降水中氘盈余值;北山地区大气降水的水化学型主要为HCO₃·SO₄-Ca和HCO₃-Ca型,降水中离子浓度具有明显的季节性变化,降雨量的增加对离子浓度具有一定的稀释作用;Na⁺受海源和陆源物质的双重影响;绝大部分的Ca²⁺,K⁺,HCO₃^-和部分Mg²⁺来源于陆源,SO₄^2-与NO₃^-的主要来自于人类活动输入;区内冬夏季水汽来源基本一致,来源于西北方向的季风源是北山地区最主要的水汽来源.研究成果可为我国高放废物地质处置库选址和性能评价以及未来地下处置库建设提供依据,也有助于丰富西北干旱区的水文循环过程研究.     

膜、柱串联固相萃取-高效液相色谱法测定水中多环芳烃(PAHs)的研究

建立了用膜-柱串联固相萃取(SPE)技术,甲醇和水作为流动相进行梯度洗脱,紫外和荧光检测器串联的高效液相色谱法(HPLC)分析水中EPA优先监控的16种PAHs的方法.     

Exposure Assessment to Mercury Vapor in Chloralkali Industry

The aim of the study was to develop a sampling method aimed at individual sampling of mercury vapor and subsequent individualexposure assessment of the worker. Hopcalite available fromInowrocawskie Zakady Chemiczne (in Poland) was founduseful for mercury vapor sampling in active and passive individual samplers. However the sampling rate determined forpassive sampler in steady-state laboratory chamber cannot be usedunder fluctuating conditions of mercury vapor concentration andair movement typical for field measurement. In order to check comparativeness of passive and active sampling methods, sampleswere taken in the same time and individual samplers fixed toworker's clothes were used. Mercury vapor concentration wasmeasured at two chloralkali industries in Poland and the resultswere presented. Excessive exposure in both industries wasconfirmed by finding elevated mercury concentration in urinesamples from the workers.     

用液相催化法和脱硫除尘器脱除烟气中SO_2

在由旋风水膜和两块旋流塔板组成的处理气量为７５０ｍ￣３／ｈ的二级脱硫除尘器中，进行了用含催化剂Ｍｎ￣（２＋）的水溶液吸收ＳＯ_２的扩大试验。结果表明，在确定的条件下，脱硫率达到７３％，板效率为０．２５～０．２８。在同一设备中同时完成除尘与脱硫过程，设备投资少；以水为吸收剂，运行费用低；中性条件下吸收，长期运转不结垢，可靠性高。     

利用多次回归拟合水的饱和蒸气压与温度的关系表达式

在使用于湿球测定锅炉烟气含湿量的过程中,需要查找水的饱和蒸气压,非常不方便.利用D-196和<化工原理>上册中取得部分数据,用多次线性回归的方法,拟合出水在0～200℃范围内的饱和蒸气压与温度的关系表达式;并对该表达式的误差进行了分析,误差均值为0.2‰,最大值也只有0.8‰,完全可以满足环境监测中数据处理的精度要求.     

液体化工罐区静电产生的原因及防范措施

对液体化工罐区静电产生的原因及可能产生的严重危害性做了详细的分析,并提出了防范措施.     

空气湿度对低浓度有机蒸气在活性炭上吸附平衡的影响

采用吸附柱穿透曲线法测定了30℃不同相对湿度（RH）下4种低浓度有机蒸气（VOC）在活性炭上的等温吸附量，结果表明，水蒸汽对VOC吸附平衡的抑制作用。随着RH的增大，VOC浓度的降低而增大，且随着VOC分子极性的增强则有所增大；VOC水蒸汽吸了平衡的抑制作用，随着VOC分子极性的增强是有所减弱，提出一个基于竞争吸附机理的olanyi-Dubi-min方程，解释空气湿度对低浓度VOC在活性炭吸附平衡的影响。     

自制快速移液器在溶解氧测定中的应用

本文介绍了一种用于溶解氧测定的自制快速移液器．大量实践证明，这种移液器的应用，可明显提高溶解氧测定结果的准确度和精密度，并可缩短样品分析时间．