INCORPORATING NATURAL VARIABILITY,UNCERTAINTY, AND RISK INTO WATER QUALITY EVALUATIONS USING DURATION CURVES1

ABSTRACT: Quantifying natural variability, uncertainty, and risk with minimal data is one of the greatest challenges facing those engaged in water quality evaluations, such as development of total maximum daily loads (TMDL), because of regulatory, natural, and analytical constraints. Quantification of uncertainty and variability in natural systems is illustrated using duration curves (DCs), plots that illustrate the percent of time that a particular flow rate (FDC), concentration (CDC), or load rate (LDC; “TMDL”) is exceeded, and are constructed using simple derived distributions. Duration curves require different construction methods and interpretations, depending on whether there is a statistically significant correlation between concentration (C) and flow (Q), and on the sign of the C‐Q regression slope (positive or negative). Flow DCs computed from annual runoff data vary compared with an FDC developed using all data. Percent exceedance for DCs can correspond to risk; however, DCs are not composed of independent quantities. Confidence intervals of data about a regression line can be used to develop confidence limits for the CDC and LDC. An alternate expression to a fixed TMDL is suggested as the risk of a load rate being exceeded and lying between confidence limits. Averages over partial ranges of DCs are also suggested as an alternative expression of TMDLs. DCs can be used to quantify watershed response in terms of changes in exceedances, concentrations, and load rates after implementation of best management practices.     

Best Management Practices for Silvicultural Chemicals and the Science Behind Them

Silvicultural chemicals include fertilizers and pesticides applied for forest management. All states east of the Rockies have at least some form of silvicultural chemical best management practices (SCBMPs) and it is widely accepted that SCBMPs effect some protection of water quality. All SCBMPs recommend handling and application precautions and a minimum width streamside management zone (SMZ) on each side of streams for protection of water quality and aquatic ecosystems. Typically these zones increase in width as stream width increases. In areas where cold-water fish are present, additional widths are designated for their protection. Minimum SMZ widths range from 8 to 91 meters on each side of the stream bank for intermittent and perennial streams. Most SMZ recommendations do not cover ephemeral drainages, ditches or canals. SMZs are generally described as being site specific with width dependent on slope, soil type and other conditions as well as the stream's designation as perennial or intermittent. The science behind SCBMPs is often elusive. Spray drift can be controlled through proper selection and use of application technology while considering site specific conditions. SMZs greatly reduce the amount of herbicides reaching streams. Available toxicological data and research on aquatic ecosystem impacts from herbicide use suggest that additional protection from silvicultural chemicals may not be necessary. However, there is evidence to suggest that protection of ephemeral and intermittent channels can further reduce entry of silvicultural chemicals into streams and also reduce sedimentation. This may be the most fruitful area of research we can pursue in light of the knowledge gaps listed.     

BMP tests of source selected OFMSW to evaluate anaerobic codigestion with sewage sludge

The aim of this study is to characterize different types of source selected organic fraction of municipal solid waste (SS-OFMSW) in order to optimize the upgrade of a sewage sludge anaerobic digestion unit by codigestion. Various SS-OFMSW samples were collected from canteens, supermarkets, restaurants, households, fruit–vegetable markets and bakery shops. The substrates characterization was carried out getting traditional chemical–physical parameters, performing elemental analysis and measuring fundamental anaerobic digestion macromolecular compounds such as carbohydrates, proteins, lipids and volatile fatty acids. Biochemical methane potential (BMP) tests were conducted at mesophilic temperature both on single substrates and in codigestion regime with different substrates mixing ratios. The maximum methane yield was observed for restaurant (675 NmlCH₄/gVS) and canteens organic wastes (571 and 645 NmlCH₄/gVS). The best codigestion BMP test has highlighted an increase of 47% in methane production respect sewage sludge digestion.     

Increasing exfiltration from pervious concrete and temperature monitoring

Pervious concrete typically has an infiltration rate far exceeding any expectation of precipitation rate. The limiting factor of a retention based pervious concrete system is often defined by how quickly the underlying soil subgrade will infiltrate the water temporarily stored within the concrete and/or aggregate base. This issue is of particular importance when placing a pervious concrete system on compacted fine textured soils. This research describes the exfiltration from twelve pervious concrete plots constructed on a compacted clay soil in eastern Tennessee, USA. Several types of treatments were applied to the clay soil prior to placement of the stone aggregate base and pervious concrete in an attempt to increase the exfiltration rate, including: 1) control – no treatment; 2) trenched – soil trenched and backfilled with stone aggregate; 3) ripped – soil ripped with a subsoiler; and 4) boreholes – placement of shallow boreholes backfilled with sand. The average exfiltration rates were 0.8 cm d⁻¹ (control), 4.6 cm d⁻¹ (borehole), 10.0 cm d⁻¹ (ripped), and 25.8 cm d⁻¹ (trenched). The trenched treatment exfiltrated fastest, followed by the ripped and then the borehole treatments, although the ripped and borehole treatments were not different from one another at the 5% level of significance. The internal temperature of the pervious concrete and aggregate base was monitored throughout the winter of 2006–2007. Although the temperature of the pervious concrete dropped below freezing 24 times, freezing concrete temperatures never coincided with free water being present in the large pervious concrete pores. The coldest recorded air temperature was −9.9 °C, and the corresponding coldest recorded pervious concrete temperature was −7.1 °C. The temperature of the pervious concrete lagged diurnal air temperature changes and was generally buffered in amplitude, particularly when free water was present since the addition of water increases the thermal capacity of the pervious concrete greatly. The temperature of the aggregate base was further buffered to diurnal changes, and no freezing temperatures were recorded.     

A WATER QUALITY‐BASED APPROACH FOR WATERSHED WIDE BMP STRATEGIES1

ABSTRACT: Watershed management strategies generally involve controlling nonpoint source pollution by implementing various best management practices (BMPs). Currently, stormwater management programs in most states use a performance‐based approach to implement onsite BMPs. This approach fails to link the onsite BMP performance directly to receiving water quality benefits, and it does not take into account the combined treatment effects of all the stormwater management practices within a watershed. To address these issues, this paper proposes a water quality‐based BMP planning approach for effective nonpoint source pollution control at a watershed scale. A coupled modeling system consisting of a watershed model (HSPF) and a receiving water quality model (CE‐QUAL‐W2) was developed to establish the linkage between BMP performance and receiving water quality targets. A Monte Carlo simulation approach was utilized to develop alternative BMP strategies at a watershed level. The developed methodology was applied to the Swift Creek Reservoir watershed in Virginia, and the results show that the proposed approach allows for the development of BMP strategies that lead to full compliance with water quality requirements.     

EFFECTS OF WATERSHED BEST MANAGEMENT PRACTICES ON HABITAT AND FISH IN WISCONSIN STREAMS1

ABSTRACT: We evaluated the effectiveness of watershed‐scale implementations of best‐management practices (BMPs) for improving habitat and fish attributes in two coldwater stream systems in Wisconsin. We sampled physical habitat, water temperature, and fish communities in multiple paired treatment and reference streams before and after upland (barnyard runoff controls, manure storage, contour plowing, reduced tillage) and riparian (stream bank fencing, sloping, limited rip‐rapping) BMP installation in the treatment subwatersheds. In Spring Creek, BMPs significantly improved overall stream habitat quality, bank stability, instream cover for fish, abundance of cool‐ and coldwater fishes, and abundance of all fishes. Improvements were most pronounced at sites with riparian BMPs. Water temperatures were consistently cold enough to support coldwater fishes such as trout (Salmonidae) and sculpins (Cottidae) even before BMP installation. We observed the first‐time occurrence of naturally reproduced brown trout (Salmo trutta) in Spring Creek, indicating that the stream condition had been improved to be able to partially sustain a trout population. In Eagle Creek and its tributary Joos Creek, limited riparian BMPs led to localized gains in overall habitat quality, bank stability, and water depth. However, because few upland BMPs were installed in the subwatershed there were no improvements in water temperature or the quality of the fish community. Temperatures remained marginal for coldwater fish throughout the study. Our results demonstrate that riparian BMPs can improve habitat conditions in Wisconsin streams, but cannot restore coldwater fish communities if there is insufficient upland BMP implementation. Our approach of studying multiple paired treatment and reference streams before and after BMP implementation proved effective in detecting the response of stream ecosystems to watershed management activities.     

THE RELATIONSHIP BETWEEN BEST MANAGEMENT PRACTICES AND RECEIVING-WATER STANDARDS1

ABSTRACT: An important enforcement question is, “What should be the relationship between ‘Best Management Practices’ (BMP) and receiving-water standards?” Nonpoint pollution dischargers are concerned about implementing a BMP program, only to find themselves in violation because receiving-water standards still have not been met. They are also concerned about the procedures a regulatory agency will utilize to determine the relative success of a BMP program. Successful management of nonpoint pollution requires that these concerns be addressed. Three alternative relationships have been developed. The recommended alternative is to implement the BMP program and use standards as a measure of the effectiveness of the program. Failure to achieve the standards would lead to a reevaluation of the BMP program. Enforcement activities against nonpoint dischargers would be restricted to the failure on their part to implement the previously agreed upon BMP program. Recommendations are also made as to measures regulatory agencies should take if their procedures to judge the relative success of a BMP program are to be technically and politically effective.     

Spatial distribution of pollution in an urban stormwater infiltration basin

Infiltration basins are frequently used for stormwater drainage. Because stormwater is polluted in highly toxic compounds, assessment of pollution retention by infiltration basins is necessary. Indeed, if basins are not effective in trapping pollution, deep soil and groundwater may be contaminated. This study's objective is to investigate soil pollution in infiltration basins: spatial distribution of soil pollution, optimisation of the number of soil samples and a contamination indicator are presented. It is part of a global project on long-term impact of stormwater infiltration on groundwater. Soil sampling was done on a basin in suburban Lyon (France). Samples were collected at different depths and analysed for nutrients, heavy metals, hydrocarbons and grain size. Pollutant concentrations decrease rapidly with depth while pH, mineralisation and grain size increase. Sustainable metal concentrations are reached at a 30-cm depth, even after 14 years of operation; hydrocarbon pollution is deeper. Principal component analysis shows how pollutants affect each level. The topsoil is different from other levels. Three specifically located points are enough to estimate the mass of pollution trapped by the basin with a 26% error. The proposed contamination indicator is calculated using either average level concentrations or maximum level concentrations. In both cases, the topsoil layer appears polluted but evaluation of lower levels is dependent on the choice of input concentrations.     

好氧预处理农业草类废物的BMP分析和动力学研究

农业草类废物既是一种废弃物，也是一种资源，由于其富含有机质，可通过厌氧生物降解产生沼气。本文研究了农业草类废物的好氧预处理对其固含量成分，生物沼气产生潜力（ＢＭＰ），甲烷浓度，产气速率的影响进行了研究；并计算了作为一级反应的反应速率常数，其结果表明模型与实验值一致性较好。     

Road Erosion and Delivery Index (READI): A Model for Evaluating Unpaved Road Erosion and Stream Sediment Delivery

The Road Erosion and Delivery Index (READI) is a new geographic information system–based model to assess erosion and delivery of water and sediment from unpaved road networks to streams. READI quantifies the effectiveness of existing road surfacing and drain placements in reducing road sediment delivery and guides upgrades to optimize future reductions. Roads are draped on a digital elevation model and parsed into hydrologically distinct segments. Segments are further divided by engineered drainage structures. For each segment, a kinematic wave approximation generates runoff hydrographs for specified storms, with discharge directly to streams at road–stream crossings and onto overland‐flow plumes at other discharge points. Plumes are attenuated by soil infiltration, which limits their length, with delivery occurring if plumes intersect streams. Sediment production and sediment delivery can be calculated as a relative dimensionless index. READI predicts only a small proportion of new drains and new surfacing results in the majority of sediment delivery reductions. The model illustrates how the spatial relationships between road and stream networks, controlled by topography and network geometries, influence patterns of road–stream connectivity. READI was applied in seven northern California basins. The model was also applied in a recent burn area to examine how reduced hillslope infiltration can result in increased hydrologic connectivity and sediment delivery.