排序方式: 共有3条查询结果,搜索用时 109 毫秒
1
1.
电增强活性炭纤维吸附有机污染物的动力学研究 总被引:2,自引:0,他引:2
研究了在电极化条件下,几种具有代表性污染物质在活性炭纤维上的电吸附动力学特性.结果表明,各种污染物的电吸附动力学比较好地符合Lagergren一级吸附动力学,其平衡吸附量在电极化下的增加量各不相同.在400mV的极化电位下,苯酚钠的吸附量从开路时的0.008 3mmol·g-1增加到0.18 mmol·g-1,增加了17倍;而对硝基苯酚的吸附量从开路时的2.93mmol·g-1降到2.65 mmol·g-1.在-400mV的极化电位下,苯胺的吸附量从开路时的3.60 mmol·g-1增加到3.88 mmol·g-1;而十二烷基苯磺酸钠的吸附量从开路时的2.20 mmol·g-1降到1.59 mmol·g-1.说明不同取代基的苯衍生物,电吸附改变量不相同,供电子基团的单取代苯,正极化都能明显增强其吸附量;但是吸电子基团的单取代,正负极化对吸附量的影响都很小;供体-共轭桥键-受体型结构的苯衍生物,正负极化都使其吸附减弱但吸附速率加快.静电作用在离子型污染物的电吸附中表现明显. 相似文献
2.
Studies on the suitability of various chemically prepared activated carbons (CPACs) like straw carbon (SC), sawdust carbon (SDC), dates nut carbon (DNC) and commercial activated carbon (CAC) for the removal of copper(II) ions by adsorption from simulated wastewater have been carried out under batch mode at 30?±?1°C and the results are compared. The percentage removal of Cu(II) ions increased with a decrease in initial concentration, particle size and added electrolytes (ionic strength) and increased with an increase in contact time, dose of adsorbent and initial pH of the solution. The adsorption data were fitted with the Langmuir isotherm. The applicability of the first order kinetic equation viz. Lagergren equation was tested by correlation analysis. The adsorption process is concluded to be a spontaneous, first order reaction, occurring with increased randomness at the solid–liquid interface. Studies on the desorption of Cu2+-loaded activated carbons (ACs) were carried out with nitric acid (0.2–1?N). The possibility of reuse of the regenerated ACs in cycle (in cue-one after another) was tested. SC was found to be a suitable adsorbent alternative to CAC among CPACs for the removal of metal ions, in general, and Cu2+ ions, in particular. 相似文献
3.
Kinetics of enhanced adsorption by polarization for organic pollutants on activated carbon fiber 总被引:1,自引:0,他引:1
Han Yanhe Quan Xie Zhao Huimin Chen Shuo Zhao Yazhi 《Frontiers of Environmental Science & Engineering in China》2007,1(1):83-88
The adsorption kinetics for model pollutants on activated carbon fiber (ACF) by polarization was investigated in this work.
Kinetics data obtained for the adsorption of these model pollutants at open-circuit, 400 mV, and −400 mV polarization were
applied to the Lagergren equation, and adsorption rate constants (K
a) were determined. With the anodic polarization of 400 mV, the capacity of sodium phenoxide was increased from 0.0083 mmol/g
at open-circuit to 0.18 mmol/g, and a 17-fold enhancement was achieved; however, the capacity of p-nitrophenol was decreased from 2.93 mmol/g at open-circuit to 2.65 mmol/g. With the cathodal polarization of −400 mV, the
capacity of aniline was improved from 3.60 mmol/g at open-circuit to 3.88 mmol/g; however, the capacity of sodium dodecylbenzene
sulfonate was reduced from 2.20 mmol/g at open-circuit to 1.59 mmol/g. The enhancement for electrosorption changed with different
groups substituting. Anodic polarization enhances the adsorption of benzene with the electron-donating group. But whether
anodic or not, cathodal polarization had less effect on the adsorption of electron-accepting aromatic compounds, and decreased
the adsorption capacity of benzene-bearing donor-conjugate bridge-acceptor, while increasing its adsorption rate. Electrostatic
interaction played a very important role in the electrosorption of ion-pollutants.
Translated from Environmental Science, 2006, 27(6): 1111–1116 [译自: 环境科学] 相似文献
1