Ca(OH)2解吸并固定混合吸收液中CO2的实验研究

CO₂化学吸收法分离纯度高,技术成熟,但能耗过高及成本是困扰该技术发展的瓶颈.在常压条件下对利用Ca（OH）₂直接矿物碳酸化固定MDEA/PZ混合吸收富液中CO₂进行了一系列实验研究,考察了吸收液负荷、Ca（OH）₂投加量、pH、温度及搅拌速率等因素对解吸率的影响,并利用动态吸收-解吸循环实验研究了其CO₂吸收性能和循环使用稳定性,最后对碳酸化反应产物进行了XRD、TEM分析.结果表明,在常压条件下,Ca（OH）₂可以通过液相直接矿物碳酸化对CO₂进行直接固定,并实现吸收富液的再生;随着负荷的升高及Ca（OH）₂投加量、pH、搅拌速率的增大,解吸率随之增加;随着溶液温度升高,解吸率下降;经过5次动态吸收-解吸循环实验后CO₂吸收量可以达到并保持在0.57 mol·L^-1,显示出了良好的循环稳定性.     

Iron and lead ion adsorption by microbial flocculants in synthetic wastewater and their related carbonate formation

Although microbial treatments of heavy metal ions in wastewater have been studied, the removal of these metals through incorporation into carbonate minerals has rarely been reported. To investigate the removal of Fe^3＋ and Pb^2＋, two representative metals in wastewater, through the precipitation of carbonate minerals by a microbial flocculant （MBF） produced by Bacillus mucilaginosus. MBF was added to synthetic wastewater containing different Fe^3＋ and Pb^2＋ concentrations, and the extent of flocculation was analyzed. CO2 was bubbled into the mixture of MBF and Fe^3＋/Pb^2＋ to initiate the reaction. The solid substrates were analyzed via X-ray diffraction, transmission electron microscopy and energy dispersive spectroscopy. The results showed that the removal efficiency decreased and the MBF adsorption capacity for metals increased with increasing heavy metal concentration. In the system containing MBF, metals （Fe^3＋ and Pb^2＋）, and CO2, the concentrated metals adsorbed onto the MBF combined with the dissolved CO2, resulting in oversaturation of metal carbonate minerals to form iron carbonate and lead carbonates. These results may be used in designing a method in which microbes can be utilized to combine CO2 with wastewater heavy metals to form carbonates, with the aim of mitigating environmental problems.     

航空光学器件的损伤破裂机理和加速寿命试验方法 研究

目的研究航空光学器件的损伤破裂机理和加速寿命试验方法。方法从理论上对航空光学器件的损伤破裂机理进行研究,对不同机理产生的原因、表现及预防措施进行分析。分析大气摩擦和太阳辐射因素对航空光学器件表面温度的影响,在Arrhenius模型理论基础上,以加速寿命试验方法计算航空光学器件的寿命。结果推导出了航空光学器件寿命的计算公式。结论航空光学器件的损伤破裂主要归因于脆性断裂失效和疲劳断裂失效。     

Biological control experiment of excess propagation of Cyclops for drinking water security

Cyclops of zooplankton propagated excessively in eutrophic water body and could not be effectively inactivated by the conventional disinfections process like chlorination due to its stronger resistance to oxidation. In this study, an ecological project was put forward for the excess propagation control of Cyclops by stocking the filter-feeding fishes such as silver carp and bighead carp under the condition of no extraneous nutrient feeding. The results of experiments with different stocking biomass showed that the propagation of Cyclops could be controlled effectively, and the water quality was improved simultaneously by impacting on nutriment level and plankton community structure at proper stocking density of 30 g/m^3 of water. The growth of Cyclops may not be effectually controlled with lower biomass of fish （10 g）, and the natural food chain relation may be destroyed for Cyclops dying out in water while the intense stocking of 120 g per cubic meter of water. In addition, the high predator pressure may accelerate supplemental rate of nutrients from bottom sediments to water body to add the content of total nitrogen and phosphorus in water.     

Factors affecting the direct mineralization of CO2 with olivine

Olivine, one of the most abundant minerals existing in nature, is explored as a CO2 carbonation agent for direct carbonation of CO2 in flue gas. Olivine based CO2 capture is thermodynamically favorable and can form a stable carbonate for long-term storage. Experimental results have shown that water vapor plays an important role in improving CO2 carbonation rate and capacities. Other operation conditions including reaction temperature, initial CO2 concentration, residence time corresponding to the flow rate of CO2 gas stream, and water vapor concentration also considerably affect the performance of the technology.     

Two-step accelerated mineral carbonation and decomposition analysis for the reduction of CO2 emission in the eco-industrial parks

Carbon dioxide（CO2） emissions are a leading contributor to the negative effects of global warming. Globally, research has focused on effective means of reducing and mitigating CO2 emissions. In this study, we examined the efficacy of eco-industrial parks（EIPs） and accelerated mineral carbonation techniques in reducing CO2 emissions in South Korea.First, we used Logarithmic Mean Divisia Index（LMDI） analysis to determine the trends in carbon production and mitigation at the existing EIPs. We found that, although CO2 was generated as byproducts and wastes of production at these EIPs, improved energy intensity effects occurred at all EIPs, and we strongly believe that EIPs are a strong alternative to traditional industrial complexes for reducing net carbon emissions. We also examined the optimal conditions for using accelerated mineral carbonation to dispose of hazardous fly ash produced through the incineration of municipal solid wastes at these EIPs. We determined that this technique most efficiently sequestered CO2 when micro-bubbling, low flow rate inlet gas, and ammonia additives were employed.     

A novel sequence batch membrane carbonation photobioreactor developed for microalgae cultivation

A novel SBM-C-PBR was constructed for microalgae cultivation. Membrane fouling was greatly mitigated by membrane carbonation. NH₄⁺ and P removal rates were around 80% in SBM-C-PBR. Biomass was completely retained by membrane. In this study, a novel sequence batch membrane carbonation photobioreactor was developed for microalgae cultivation. Herein, membrane module was endowed functions as microalgae retention and CO₂ carbonation. The results in the batch experiments expressed that the relatively optimal pore size of membranes was 30 nm, photosynthetically active radiation was 36 W/m² and the CO₂ concentration was 10% (v/v). In long-term cultivation, the microalgal concentration separately accumulated up to 1179.0 mg/L and 1296.4 mg/L in two periods. The concentrations of chlorophyll a, chlorophyll b and carotenoids were increased about 23.2, 14.9 and 6.3 mg/L respectively in period I; meanwhile, the accumulation was about 25.0, 14.5, 6.6 mg/L respectively in the period II. Furthermore, the pH was kept about 5.5–7.5 due to intermittent carbonation mode, which was suitable for the growth of microalgae. Transmembrane pressure (TMP) was only increased by 0.19 and 0.16 bar in the end of periods I and II, respectively. The pure flux recovered to 75%–80% of the original value by only hydraulic cleaning. Scanning electron microscope images also illustrated that carbonation through membrane module could mitigate fouling levels greatly.     

炼钢精炼渣气固碳酸化反应吸附CO2

采用炼钢精炼渣,通过气固碳酸化反应吸附CO₂,考察了不同吸附温度下精炼渣对纯CO₂和模拟高炉煤气中CO₂的吸附能力。实验结果表明：吸附温度对精炼渣吸附CO₂反应有显著的影响,升高温度可以提高精炼渣对CO₂的吸附能力;在400 ℃时,精炼渣吸附纯CO₂和模拟高炉煤气中CO₂的量分别为4.7 mg/g和9.8 mg/g;吸附温度升高到500 ℃和550 ℃时,精炼渣对纯CO₂的吸附能力强于高炉煤气中CO₂;在550 ℃时,精炼渣吸附纯CO₂和模拟高炉煤气中CO₂的量达到最高,分别为14.7 mg/g和12.9 mg/g。     

从含铬铝泥中回收铝的新工艺

采用"打浆水洗除Cr(Ⅵ)—电渗析除Cr(Ⅵ)—碱浸提铝—碳酸化分解法精制Al_2O_3"的新工艺处理含铬铝泥(以下简称铝泥),并回收Al_2O_3。实验结果表明:铝泥在70℃下经3次打浆水洗后,w(Na_2CrO_4)(以干铝泥计)降至5.0%;采用电渗析除Cr(Ⅵ)工艺可有效去除铝泥中以结合态和结晶态形式存在的Na_2CrO_4,在55 V直流电压下电渗析6h后铝泥中的w(Na_2CrO_4)降至0.98%;在碱浸温度为100℃、碱浸时间为3 h、NaOH质量浓度为150 g/L的优化碱浸条件下,铝浸出率(以Al_2O_3计)高达90.0%;经3次碳酸化分解处理后,Al_2O_3产品的纯度达98.65%,满足GB/T 24487-2009《氧化铝》中的一级标准,Al_2O_3回收率为96.37%。     

利用滩涂污灌土壤制备吸附剂

研究了滩涂污灌土壤吸附剂的制备方法。通过正交实验,比较了氯化锌、磷酸、氢氧化钾、盐酸几种活化剂在不同秸秆加入量、活化剂浓度、活化时间、活化温度的情况下制备的吸附剂,对水中邻硝基甲苯的吸附效果影响。实验结果表明,选择盐酸活化法制备吸附剂,在秸秆加入量为15%,经2 mol/L的盐酸按液固比为1∶1浸泡处理滩涂污灌土壤后,用氮气做保护气在400℃的条件下碳化1 h,制备的土壤吸附剂对水中邻硝基甲苯的吸附效率可以达到90%以上。