河北省不同盐渍化土壤类型的微生物多样性与种群结构

为了探索盐渍化土壤中微生物多样性及群落构成，有效筛选盐渍土壤中耐盐微生物菌群.采用高通量测序技术对采集的河北省滨海盐渍土（原生盐渍化）、设施盐渍土（次生盐渍化）和高产粮田（健康土壤）3个生境的耕层土壤样本细菌和真菌多样性、群落结构、网络关系及其影响因子进行测定.结果表明，与大田土壤相比，设施土壤中OM、AP、AK、TS和EC显著升高，滨海盐渍土壤的TS和EC显著升高，其他养分指标则显著降低.细菌α多样性依次为：设施盐渍土>高产粮田>滨海盐渍土，真菌α多样性则为高产粮田显著高于设施盐渍土和滨海盐渍土.在门和属水平上分析盐渍化土壤的菌群结构，细菌群落中绿弯菌门（Chloroflexi）及其菌属和真菌群落中子囊菌门（Ascomycota）及其中有益菌Trichocladium和病原菌Fusarium为盐渍化土壤中的优势微生物类群.土壤EC和TS两个盐分因子是对细菌和真菌菌群分布贡献最大的因子，与绿弯菌门中unclassified_A4b和unclassified_Chloroflexi以及变形菌门中unclassified_α-Proteobacteria等细菌菌属和子囊菌门中Trichocladium、unclassified_Chaetomiaceae、Crassicarpon、Cephaliophora和Sodiomyces等真菌菌属呈显著正相关.研究结果为盐渍化土壤修复所需的微生物资源筛选提供了理论依据.     

财政分权对环境污染的空间效应

利用2006—2017年我国30个省级行政单位的面板数据,采用空间计量模型对财政分权与环境污染之间的关系进行实证分析,并通过效应分解分别计算出财政收入分权和财政支出分权对环境污染的直接效应、空间溢出效应和总效应。模型估计的结果表明:①财政收入分权与财政支出分权通过直接效应和空间溢出效应两种途径对环境污染产生显著影响,但收入分权与支出分权对环境污染的空间效应具有异质性。②财政收入分权对环境污染具有显著的负向直接效应和负向空间溢出效应,影响系数分别为-5.429和-17.572。提高财政收入分权度不仅有利于减轻本省份环境污染,也对邻近省份的环境污染起到抑制作用。而财政支出分权对环境污染具有显著的负向直接效应和正向的空间溢出效应,影响程度分别为-3.345和1.173。提高财政支出分权虽然有利于减少本省份污染的排放,但在一定程度上引起省际的污染外溢效应,提高邻近省份的污染程度。③从总效应来看,财政收入分权和财政支出分权对环境污染均呈现出显著的负向相关性,影响程度分别为-23.001和-2.172。提高财政分权可降低环境污染水平,有利于环境质量提升。④通过构建不同空间权重矩阵,检验模型的稳健性,结果表明模型估计是稳健可靠的。根据分析结论,可能的启示与建议有:①合理划分中央政府和地方政府之间的财政事权和支出责任,在提高财政支出分权度的同时提高地方政府财政收入分权度,充分发挥地方政府环境治理的积极性和主动性。②继续加大生态环境保护力度,完善绿色经济考核机制,引导地方政府加大对污染治理和环境改善的支出水平及效率。     

Understanding and addressing the environmental risk of microplastics

Over the past decades, the plastic production has been dramatically increased. Indeed, a category of small plastic particles mainly with the shapes of fragments, fibers, or spheres, called microplastics (particles smaller than 5 mm) and nanoplastics (particles smaller than 1 μm) have attracted particular attention. Because of its wide distribution in the environment and potential adverse effects to animal and human, microplastic pollution has been reported as a serious environment problem receiving increased attention in recent years. As one of the commonly detected emerging contaminants in the environment, recent evidence indicates that the concentration of microplastics show an increasing trend, for the reason that up to 12.7 million metric tons of plastic litter is released into aquatic environment from land-based sources each year. Furthermore, microplastic exposure levels of model organisms in laboratory studies are usually several orders of magnitude higher than those found in environment, and the microplastics exposure conditions are also different with those observed in the environment. Additionally, the detection of microplastics in feces indicates that they can be excreted out of the bodies of animal and human. Hence, great uncertainties might exist in microplastics exposure and health risk assessment based on current studies, which might be exaggerated. Policies reduce microplastic emission sources and hence minimize their environmental risks are determined. To promote the above policies, we must first overcome the technical obstacles of detecting microplastics in various samples.     

呼吸效应对矿井封闭火区氧浓度的影响分析

为避免因火区封闭导致重大安全事故发生，通过采集某矿井1 d内3个不同监测点的大气压力变化情况，建立大气压力波动模型并分析计算，同时建立火区内外压差100，750 Pa情形下的氧浓度模型进而获得火区内侧氧气浓度因呼吸效应，在不同压差、体积大小火区、风阻、瓦斯涌出量、封闭时刻等多因素耦合影响下随时间的变化规律，以评估火区危险性。研究结果表明:井下大气随地面大气周期波动，封闭火区内、外侧之间的气压差因外界大气波动呈现16 h的余弦波动和8 h的线性波动周期变化；密闭质量好的火区具有更好地抗干扰性，内侧氧浓度的降低主要依靠瓦斯稀释；密闭质量差的火区，内侧氧浓度易受到火区涌出瓦斯、外界涌入大气双重影响；火区氧浓度在2%~12%之间波动，以至火区存在发生瓦斯爆炸的可能性；火区内外压差较大时，氧浓度波动变化幅度更大，危险作用持续时间更长。结合火区氧浓度波动模型，可有效地对矿井火区采取安全的防范措施，避免瓦斯爆炸事故发生。     

建筑安全风险因素分级排序的风险矩阵法

为减少风险分级排序时产生的风险结,在引入施工安全事故频率的基础上,采用单元格细化和Borda序值法改进原有的风险矩阵法。改进后的方法使得风险等级数量增加,风险结数量减少。将该方法应用于脚手架工程的风险因素的分级与排序,风险等级分为6级,且实现了12个因素的明确排序。     

Fatal pedestrian crashes on interstates and other freeways in the United States

Introduction: More than 800 pedestrians die annually in crashes on interstates and other freeways in the United States, but few studies have examined their characteristics. Method: Data from the Fatality Analysis Reporting System on pedestrians fatally injured during 2015–2017 were analyzed. Chi-square tests compared characteristics of pedestrians killed on interstates and other freeways with those that died on other roads, and across crash types among freeway deaths. Land use characteristics of locations where pedestrians were killed while crossing freeways in a large state (California) were identified using Google Earth. Results: A larger proportion of pedestrians killed on freeways died on dark and unlit roads (48% vs. 32%), were male (78% vs. 68%), or were ages 20–44 (55% vs. 32%) compared with pedestrians killed on other roads. Crossing (42%) was the most common crash type among pedestrian deaths on freeways, followed by disabled-vehicle-related crashes (18%). Pedestrians who died while crossing more often had blood alcohol concentrations ≥ 0.08 g/dL (40%) than those in disabled-vehicle-related (22%) or other crashes (34%). Deaths in crossing crashes were more likely than other freeway deaths to occur on urban roads (81%), at speed limits ≤50 mph (13%), or between 18:00 and 23:59 (49%), and 58% of crossing crashes analyzed for land use were located between residential and other (e.g., commercial, recreational) uses. Over a third (37%) of deaths in disabled-vehicle-related crashes occurred at speed limits ≥70 mph. Conclusions: A surprising proportion of pedestrian deaths occur on controlled-access roads not designed for walking. Countermeasures for these crashes need to be implemented to see meaningful reductions in pedestrian fatalities overall. Practical applications: Improving roadway and vehicle lighting, requiring reflective warning devices for marking disabled vehicles, constructing pedestrian overpasses and underpasses in areas frequently crossed, and promoting alternative means of traveling between residential and commercial areas could help.     

Factors contributing to US chemical plant process safety incidents from 2010 to 2020

Process safety incidents can result in injuries, fatalities, environmental impacts, facility damage, downtime & lost production, as well as impacts on a company's and industry's reputation. This study is focused on an analysis of the most commonly reported contributing factors to process safety incidents in the US chemical manufacturing industry. The database for the study contained 79 incidents from 2010 to 2019, partly investigated by the Chemical Safety Board (CSB). To be included in the study, the CSB archive of incident investigations were parsed to include only incidents which occurred at a company classified as 325 in the North American Industry Classification System (NAICS), assigned to businesses that participate in chemical manufacturing. For each incident, all of the identified contributing factors were catalogued in the database. From this list of identified contributing factors, it was possible to name the ‘top three’ contributing factors. The top three contributing factors cited for the chemical manufacturing industry were found to be: design; preventive maintenance; and safeguards, controls & layers of protection. The relationship between these top contributing factors and the most common OSHA citations was investigated as well. The investigation and citation history for NAICS 325 companies in the Occupational Safety & Health Administration (OSHA) citations database was then analysed to assess whether there was any overlap between the top reported contributing factors to process safety events and the top OSHA citations recorded for the industry. A database consisting of the inspection and citation history for the chemical manufacturing industry identified by NAICS code 325 was assembled for inspections occurring between 2010 and 2020 (August). The analysis of the citation history for the chemical manufacturing industry specifically, identified that the list of the top contributing factors to process safety incidents overlapped with the most common OSHA violations. This finding is relevant to industry stakeholders who are considering how to strategically invest resources for achieving maximum benefit – reducing process safety risk and simultaneously improving OSHA citation history.     

Factors associated with driving under the influence of alcohol

Objective: This study examined the risk factors of driving under the influence of alcohol (DUI) among drivers of specific vehicle categories (DSC). On the basis of this research, the variables related to DUI and involvement in traffic crashes were defined. The analysis was conducted for car drivers, bicyclists, motorcyclists, bus drivers, and truck drivers.

Method: The research sample included drivers involved in traffic crashes on the territory of Serbia in 2016 (60,666). Two types of analyses were conducted in this study. Logistic regression established the correlation between DUI and DSC and the The Technique for Order of Preference by Similarity to Ideal Solution (Multi-criteria decision making) method was applied to consider the scoring and explore the potential for the prevalence of DUI on the basis of 2 data sets (DUI and non DUI).

Results: The study results showed that driver error and male drivers were the 2 most significant risk factors for DUI, with the highest scores and potential for prevalence. The nonuse of restraint systems, driver experience, and driver age are the factors with a significant prediction of involvement in an accident and an insignificant prediction of DUI.

Conclusions: Following the development of the logistic prediction models for DUI drivers, testing of the model was conducted for 3 control driver groups: Car, motorcycle, and bicycle. The prediction model with a probability greater than 50% showed that 77% of car drivers were under the influence of alcohol. Similarly, the prediction percentage for motorcyclists and bicyclists amounted to 71 and 67%, respectively. The recommendation of the study is that drivers whose DUI probability is above 50% should be potentially suspected of DUI. The results of this study can help to understand the problem of DUI among specific driver categories and detect DUI drivers, with the aim of creating successful traffic safety policy.     

北京市典型废弃物焚烧源2010—2017年二NFDA1英排放特征和减排效果分析

分析2010—2017年北京市三类典型废弃物焚烧源的废气二NFDA1英排放监测数据,计算排放因子和排放量,评估减排政策成效,并分析不同排放源达标排放时同类物分布特征异同和变化规律,探讨影响排放的重要因素。结果表明: 5家焚烧源平均排放浓度为 0.008～0.069 ng/m³(以TEQ计,下同),废气二NFDA1英排放因子为 0.027～1.7 μg/t,2016年向空气中排放的二NFDA1英量为 0.002 5～0.058 g；生活垃圾、危险废物和医疗废物焚烧源的低、高氯代同类物质量分数比的平均值分别为接近于 0.5、大于0.5和小于0.5,危险废物焚烧源的 ∑PCDFs、∑PCDDs质量分数比的平均值大于2； 123478-HxCDF和123678-HxCDF质量浓度接近且线性相关,具有相近的生成机理和去除效率； I-TEQ变化趋势与∑PCDFs质量分数的变化趋势基本一致,活性炭喷射和布袋除尘的去除效率是影响二NFDA1英排放的重要因素之一；危险废物焚烧源HWI1随运行时间增加排放浓度增加,而及时更换烟道管壁有助于消除“记忆效应”的不良影响。     

基于多孔环形喷嘴的可燃爆粉尘分散特征的密度效应研究*

为了研究不同密度的可燃爆粉尘在内置多孔环形喷嘴的20 L爆炸特性测试装置中的分散特征，基于负载粒子流方法、耦合DPM动量平衡方程和时间平均 Navier Stokes控制方程组，实现3种不同密度的煤粉、铝粉和锆粉在20 L爆炸测试装置中粉尘分散全过程的数值模拟。研究结果表明:多孔环形喷嘴的分散较为均匀，但是约束管道末端存在局部粉尘残留区，致使爆炸仓内真实粉尘浓度远低于形式浓度；爆炸仓中心位置的最大湍动能随着粉尘密度的增加而减小，只有显著地变化粉尘密度才能展示区分度较高的浓度峰值和抵达浓度峰值的时间。