钴（Ⅱ）－过氧化氢－苯基荧光酮体系催化光度法测定痕量钴的研究

本文研究了钴（Ⅱ）催化过氧化氢氧化苯基荧光酮的褪色反应，测定了反应级数和表观活化能，建立了测定痕量地的新方法。２５℃时本法检出限为２９×１０－１３ｇ／ｍｌ，线性范围为０．０４～２ｎｇ／１０ｍｌ，催化反应表观活化能为５６．１５ＫＪ／ｍｏｌ。该方法己用于维生素Ｂ１２、人发和茶叶中痕量钴的测定．结果满意，相对标准偏差为２．４～３．４％。     

甲硫醚废气制取二甲基亚砜技术研究

选择双氧水作氧化剂，将具有恶臭气味的涕灭威生产的副产物甲硫醚氧化成无臭的二甲基亚砜。通过实验，优化了工艺条件，减少了安全隐患，提高了二甲基亚砜的产率，消除了恶臭污染。     

蒽对太平洋牡蛎不同组织抗氧化酶活性差异性影响与膜脂质过氧化研究

在实验条件下采用生态毒理学和生物化学方法,选用常见的环境污染物多环芳烃蒽,以太平洋牡蛎(Crassostrea gigas)为实验材料进行毒理实验.研究了太平洋牡蛎消化腺、鳃、唇瓣和肌肉4种不同组织中的3种抗氧化酶--超氧化物歧化酶(SOD)、过氧化物酶(POD)和过氧化氢酶(CAT)对蒽胁迫的敏感性;同时研究了4种不同组织膜脂过氧化的差异.结果表明:(1)4种不同组织中3种不同抗氧化酶对蒽敏感性有显著差异性.(2)4种不同组织的膜脂过氧化伤害程度表现为:消化腺＞鳃＞唇瓣＞肌肉.     

电化学原位产生H2O2的影响因素分析及数学建模

以Pt为阳极,石墨碳棒为阴极,Na2SO4为支持电解质,实验探讨了电化学原位产生H2O2的规律.通过正交试验,确定阴极溶液初始pH值、电流密度CD、通氧流量Q和支持电解质浓度CNa2SO4等主要参数对H2O2产生量的影响,并提出最佳参数组合:pH=2.00,CD=1.02mA·cm-2,Q=0.4L·min-1,CNa2SO4=0.1 mol·L-1,极间距D=6cm.采用二次多项式逐步回归和BP神经元网络2种方法,建立了这些参数对于H2O2产生量的预测模型,并对模型进行检验.结果表明,2种方法在一定参数条件下都可预测阴极区溶液中H2O2浓度,BP神经元网络法预测的准确度好于二次多项式逐步回归方法,且更适合于在线控制.     

化学发光流动注射法测定雨水中过氧化氢

用化学发光流动注射分析装置,将16孔阀连接成异步双流路,以过氧化氢-鲁米诺-钴(Ⅱ)为化学发光体系,建立了快速测定雨水中过氧化氢的方法,最低检测限为0.1ng/ml,在0.1—400ppb范围内有良好的线性关系,相对标准差为0.78—3.03％,每小时可分析480个以上的样品.     

超声-双氧水和亚铁离子体系处理含酚废水研究

在实验装置上对超声-双氧水和亚铁离子体系联合处理含酚废水进行了实验研究。主要考察了废水初始pH值、初始双氧水浓度、超声功率、反应时间等因素对酚去除率的影响。实验结果表明：超声辐射可以在双氧水和亚铁离子体系氧化过程中起加速反应的作用，而且随着超声功率的增大，加速反应的能力增强；实验条件下废水初始pH值为4～6．8，初始双氧水浓度为140mg／L时酚去除效果最佳；超声-双氧水和亚铁离子体系处理含酚废水过程中苯酚的降解规律符合表现一级反应。     

MCM-41分子筛负载铁铈催化降解甲基橙

采用等体积浸渍法制备了负载型有序介孔Fe-Ce/MCM-41催化剂。研究了该催化剂降解甲基橙的适宜工艺条件,并采用XPS,XRD,TEM技术对该催化剂进行了表征。实验结果表明,该催化剂Fenton氧化降解甲基橙的较适宜工艺条件为:溶液pH 5.0、甲基橙溶液初始质量浓度100 mg/L、催化剂加入量2.0 g/L、H_2O_2浓度20 mmol/L,在此适宜条件下反应120 min时,甲基橙去除率接近100%。表征结果显示:Fe-Ce/MCM-41催化剂主要由铁、铈、氧、碳4种元素组成;铁与铈的摩尔比接近3∶1;铁和铈主要以Fe_3O_4和CeO_2的形态存在于催化剂表面。     

The effect of alkyl chain length on the degradation of alkylimidazolium- and pyridinium-type ionic liquids in a Fenton-like system

Background, aim, and scope  Ionic liquids are regarded as essentially “green” chemicals because of their insignificant vapor pressure and, hence, are a good alternative to the emissions of toxic conventional volatile solvents. Not only because of their attractive industrial applications, but also due to their very high stability, ionic liquids could soon become persistent contaminants of technological wastewaters and, moreover, break through into natural waters following classical treatment systems. The removal of harmful organic pollutants has forced the development of new methodologies known as advanced oxidation processes (AOPs). Among them, the Fenton and Fenton-like reactions are usually modified by the use of a higher hydrogen peroxide concentration and through different catalysts. The aim of this study was to assess the effect of hydrogen peroxide concentration on degradation rates in a Fenton-like system of alkylimidazolium ionic liquids with alkyl chains of varying length and 3-methyl-N-butylpyridinium chloride. Materials and methods  The ionic liquids were oxidized in dilute aqueous solution in the presence of two different concentrations of hydrogen peroxide. All reactions were performed in the dark to prevent photoreduction of Fe(III). The concentrations of ionic liquids during the process were monitored with high-performance liquid chromatography. Preliminary degradation pathways were studied with the aid of ¹H NMR. Results  Degradation of ionic liquids in this system was quite effective. Increasing the H₂O₂ concentration from 100 to 400 mM improved ionic liquid degradation from 57–84% to 87–100% after 60 min reaction time. Resistance to degradation was weaker, the shorter the alkyl chain. Discussion  The compound omimCl was more resistant to oxidation then other compounds, which suggests that the oxidation rates of imidazolium ionic liquids by OH· are structure-dependent and are correlated with the n-alkyl chain length substituted at the N-1-position. The level of degradation was dependent on the type of head group. Replacing the imidazolium head group with pyridinium increased resistance to degradation. Nonetheless, lengthening the alkyl chain from four to eight carbons lowered the rate of ionic liquid degradation to a greater extent than changing the head group from imidazolium to pyridinium. 1H-NMR spectra show, in the first stage of degradation, that it is likely that radical attack is nonspecific, with any one of the carbon atoms in the ring and the n-alkyl chain being susceptible to attack. Conclusions  The proposed method has proven to be an efficient and reliable method for the degradation of imidazolium ionic liquids by a Fenton-like reagent deteriorated with lengthening n-alkyl substituents and by replacing the imidazolium head group with pyridinium. The enhanced resistance of 1-butyl-3-methylpyridinium chloride when the resistance of imidazolium ionic liquids decreases with increasing H₂O₂ concentration is probably indicative of a change in the degradation mechanism in a vigorous Fenton-like system. H-NMR spectra showed, in the first stage of degradation, that radical attack is nonspecific, with any one of the carbon atoms in the ring and the n-alkyl chain being susceptible to attack. Recommendations and perspectives  Since ionic liquids are now one of the most promising alternative chemicals of the future, the degradation and waste management studies should be integrated into a general development research of these chemicals. In the case of imidazolium and pyridinium ionic liquids that are known to be resistant to bio- or thermal degradation, studies in the field of AOPs should assist the future structural design as well as tailor the technological process of these chemicals     

Study of cyanide removal from contaminated water using zinc peroxide nanomaterial

The present study highlights the potential application of zinc peroxide(ZnO_2)nanomaterial as an efficient material for the decontamination of cyanide from contaminated water. A process patent for ZnO_2 synthesis has been granted in United States of America(US Patent number 8,715,612; May 2014),South Africa,Bangladesh,and India. The ZnO_2 nanomaterial was capped with polyvinylpyrrolidone(PVP)to control the particle size. The PVP capped ZnO_2nanomaterial(PVP-ZnO_2)before and after adsorption of cyanide was characterized by scanning electron microscope,transmission electron microscope,X-ray diffractometer,Fourier transform infrared spectroscopy and time of flight-secondary ion mass spectrometry. The remaining concentration of cyanide after adsorption by PVP-ZnO_2 was determined using ion chromatograph. The adsorption of cyanide over PVP-ZnO_2 was also studied as a function of p H,adsorbent dose,time and concentration of cyanide. The maximum removal of cyanide was observed in p H range 5.8–7.8 within 15 min. The adsorption data was fitted to Langmuir and Fruendlich isotherm and it has been observed that data follows both the isotherms and also follows second order kinetics.     

左氧氟沙星的超声/H2O2联合降解研究

采用超声/H2O2高级氧化技术对喹诺酮类抗生素左氧氟沙星进行降解,考察了H2O2浓度、超声功率、溶液初始pH值对反应过程的影响.结果表明,与单独超声和H2O2氧化相比,超声/H2O2对左氧氟沙星具有明显的协同降解作用. H2O2 添加浓度在3.0~20.0mmol/L范围, 左氧氟沙星的降解率随其添加浓度的增加而增加;超声功率在260W时降解效果最佳;左氧氟沙星初始浓度在10~30mg/L范围内,左氧氟沙星的降解量随其初始浓度的增加而增加;超声/H2O2降解左氧氟沙星在未调节(pH 7.14)效果最佳. HPLC分析发现降解过程主要有2种产物生成, 产物的生成和分布受体系pH的影响较大.