岩溶地下河污染物运移模型对比研究

两区模型（TRM）和暂时存储模型（TSM）为两种常用的岩溶地下河（管道）污染物运移模型,为了更好表征岩溶地下河污染物运移过程,开展模型对比研究.采用两种模型拟合室内管道示踪实验穿透曲线,从概念模型框架、模型优缺点、参数校正过程和物理意义、参数敏感性等方面对比分析两种模型的异同.结果表明,OTIS软件提供TSM的数值解,而CXTFIT软件提供TRM的解析解,但两者均能通过下游不同位置的穿透曲线分段表征地下河不同阶段的污染物运移过程.两种模型的物理意义相近,均可近似描述岩溶地下河中溶质的暂时性存储现象,较好地拟合溶质运移曲线.采用TSM可校正得到暂时存储区的横截面积,但采用TRM只能获得非流动区所占的比例.两种模型中弥散系数和传质/交换系数的敏感度较低,并且弥散系数的变化对穿透曲线拖尾无显著影响.研究结果为岩溶地下河污染物运移模型的选取与应用提供了依据.     

GA-g-PAMPS/AA/ST凝胶的制备及对亚甲基蓝吸附性能

采用微波辐射技术,通过接枝共聚反应制备了阿拉伯胶（GA）-g-2-丙烯酰胺-2-甲基丙磺酸（AMPS）/丙烯酸（AA）/海泡石黏土（ST）（GA-g-PAMPS/AA/ST）复合水凝胶,利用FTIR、XRD、SEM对复合水凝胶进行了表征,研究了水凝胶对水溶液中亚甲基蓝（MB）染料的吸附性能.结果显示：GA、ST和AA与AMPS发生了接枝共聚反应,形成具有均匀三维网络结构的复合水凝胶.0.025g水凝胶可以使体积为50mL、pH值为6.4、浓度为600mg/L的MB溶液的吸附量和吸附率分别达1146mg/g和95.5%,水凝胶具有较好的重复利用性能.Freundlich等温模型和准二级动力学模型能更好地描述吸附过程.热力学研究表明水凝胶对亚甲基蓝吸附是自发、吸热和不可逆的过程.该水凝胶可用作阳离子染料和阳离子型污染物的潜在候选生物质吸附剂.     

Ni2+对好氧颗粒污泥系统性能的影响

以城镇污水处理厂A²/O工艺的回流污泥作为接种污泥,在序批式反应器（SBR）中培养好氧颗粒污泥（AGS）,探究Ni²⁺对AGS系统的影响.结果表明：在25℃的条件下,50d左右培养出成熟的AGS,其形态多呈球状或椭球状,外表分布着少量丝状菌,颗粒污泥粒径主要在2~4mm,MLSS达6000mg/L,SVI维持在40~50mL/g.将Ni²⁺作用于培养出的成熟AGS,Ni²⁺在0~2mg/L的浓度范围内会提高AGS的稳定性,使MLSS上升,SVI降低;同时会促进AGS分泌胞外多聚物（EPS）,EPS组成成分中的蛋白质（PN）明显多于多糖（PS）;Ni²⁺对好氧颗粒污泥去除总氮（TN）的抑制程度要大于COD,最终COD去除率可维持在95%以上,TN去除率可维持在70%以上.     

储罐用钢在3.5%NaCl溶液中的腐蚀行为研究

目的对比研究三种油气储罐在水压试验时的腐蚀行为特征。方法选用9Ni钢、Q235碳钢、304L不锈钢储罐用材料以及3.5%NaCl模拟海水溶液,采用开路电位、电化学阻抗谱、动电位极化曲线测试方法研究三种储罐用钢在模拟海水中的电化学腐蚀特征,同时结合浸泡质量损失试验和微观腐蚀形貌进行分析。结果 9Ni钢、Q235碳钢、304L不锈钢稳定后的开路电位(vs.SCE)分别为-0.55、-0.64、-0.10m V,Rt值分别为2 792、1 765、125 100,平均腐蚀深度分别为0.070 6、0.160 3、0.002 5 mm/a。微观腐蚀形貌显示,9Ni钢和Q235碳钢表面发生明显的腐蚀,而304L不锈钢只发生轻微的点蚀。结论在3.5%NaCl模拟海水溶液中,304L不锈钢最耐腐蚀,Q235碳钢最易腐蚀,9Ni钢居于两者之间。因此在9Ni钢和Q235碳钢储罐海水试压过程中需要采取临时保护。     

包装箱用碳纤维增强复合材料贮存寿命研究

目的研究碳纤维增强复合材料贮存条件下的性能变化趋势和寿命评估。方法对碳纤维增强复合材料开展四个不同温度条件下的热氧老化试验,按试验周期定期取样开展冲击性能测试,对试验数据采用寿命预估方法进行处理,对材料性能进行预估。结果通过数据计算分别得到我国热带海洋、干热沙漠等典型气候条件下的碳纤维增强复合材料贮存寿命分别为17.21~35.89年。结论碳纤维增强复合材料具有较好的贮存性能,在较为严酷的热带海洋气候和给定的失效判据条件下,寿命预计为17.21年。试验和数据处理方法可以较好地预计材料的性能变化趋势和开展寿命评估。     

海潮引起的海底承压含水层系统中地下水位的波动——海底弱透水层的弹性储水效应

研究了由潜水含水层、在海底延伸的承压含水层和介于其间的弱透水层构成的滨海含水层系统中,弱透水层的弹性储水以及含水层的海潮荷载效应对承压含水层中的地下水位的影响.研究结果表明,当海底弱透水层延伸足够长时,它的弹性储水对承压含水层中的海潮引起的水头波动有增强作用.     

Transformation of Organic Matter of the Larch Forest Soils in the Northern Taiga of Nizhne-Tungusskoe Plateau, Central Siberia

The evaluation of biospheric role of the boreal forests in the accumulation of carbon is connected with the evaluation of organic matter (OM) pool in soils. The research sites were larch forests, they are situated on Nizhne-Tungusskoe Plateau. Larch forests of feather-moss and lichen types (110 and 380 years old) were formed on 'ochric podbur' soils. Litter stocks are 3.5–4.5 kg m^{− 2} with thickness 10–25 cm. Cryomezomorphic northern taiga soils contains 38–73 t (carbon) ha^{− 1}. Pool of fast mineralized OM has average value 38.1 t (carbon) ha^{− 1}, including 20.5 and 6.4 t (Carbon) ha^{− 1} of labile compounds on surface and in the soil, and 11.2 t (carbon) ha^{− 1} of mobile OM. Microbial mass reaches 1.78–3.47 t (carbon) ha^{− 1}, its proportion is 3.6–4.9% of the total OM carbon. Zoomass of feather-moss larch forest is 0.20–0.61 * 10^{− 2}, in lichen larch forest −0.01–0.07 * 10^{− 2} t (carbon) ha^{− 1}. A pool of resistant to biological decomposition and bonded to mineral soil matrix OM is 17.7 t (carbon) ha^{− 1} and it varies from 18.6 to 29.0 in feather-moss larch forest, and from 6.4 to 17.0 t (carbon) ha^{− 1} in lichen larch forest. Two-years field experiment has been performed to determine transformation rates of various plant litter fractions and to clarify the role of soil biota in these processes. The results showed participation of all biota groups in the decomposition of plant residues caused weight loss of larch-needles and root mortmass. Isolation of organic matter from all-size invertebrate groups leads to some decrease of decomposition activity.     

聚合物材料在快速原型制造技术中的应用

介绍聚合物材料作为成形原料在主要的快速原型制造(RPM)工艺中的应用情况。具体按照立体印刷成形(SLA)、层合实体制造(LOM)、选域激光烧结(SLS)及熔融沉积造型(FDM)这4种工艺的不同,阐述与各工艺对应的聚合物材料的种类、聚合物材料成形过程中可能出现的问题及解决方案。总结了聚合物材料原型的应用情况和聚合物材料在RPM技术应用中存在的问题。     

上海市雨水污染控制初探

水环境的严重污染和饮用水资源的匮乏，已对上海市的持续发展构成了直接和潜在威胁。在借鉴国外雨水处理利用的研究，应用成果，综合考虑上海市水环境，城市建设及经济发展现状和地区特点的基础上，对上海地区城市雨水污染及其特性，控制雨水污染措施等作了阐述。     

Geological CO2 Storage as a Climate Change Mitigation Option

Carbon dioxide (CO₂₎ capture and storage is increasingly being considered as an important climate change mitigation option. This paper explores provisions for including geological CO₂ storage in climate policy. The storage capacity of Norway's Continental Shelf is alone sufficient to store a large share of European CO₂ emissions for many decades. If CO₂ is injected into oil reservoirs there is an additional benefit in terms of enhanced oil recovery. However, there are significant technical and economic challenges, including the large investment in infrastructure required, with related economies of scale properties. Thus CO₂ capture, transportation and storage projects are likely to be more economically attractive if developed on a large scale, which could mean involving two or more nations. An additional challenge is the risk of future leakages from storage sites, where the government must take on a major responsibility. In institutional and policy terms, important challenges are the unsettled status of geological CO₂ storage as a policy measure in the Kyoto Protocol, lack of relevant reporting and verification procedures, and lack of decisions on how the option should be linked to the flexibility mechanisms under the Kyoto Protocol. In terms of competitiveness with expected prices for CO₂ permits under Kyoto Protocol trading, the relatively high costs per tonne of CO₂ stored means that geological CO₂ storage is primarily of interest where enhanced oil recovery is possible. These shortcomings and uncertainties mean that companies and governments today only have weak incentives to venture into geological CO₂ storage.