A metal-free composite photocatalyst of graphene quantum dots deposited on red phosphorus

A simple approach to enhance the photocatalytic activity of red phosphorus(P) was developed.A mechanical ball milling method was applied to reduce the size of red P and to deposit graphene quantum dots onto red P. The product was characterized by scanning electron microscopy, transmission electron microscopy, contact angle measurements, zeta-potential measurements, X-ray diffraction and UV–vis absorption spectroscopy. The product exhibited high visible-light-driven photocatalytic performance in the photodegradation of rhodamine B.     

大半径浅圆弧的切削加工及误差分析

在机械加工中采用近似法加工空间曲面,常常使加工过程变得简单可行,而且解决了部分机床力不能及的矛盾.在此介绍了在普通铣床上用椭圆曲线网络加工大半径浅圆弧的加工原理、加工方法及其误差分析.     

High-energy milling to decontaminate soils polluted by polychlorobiphenyls and atrazine

Mechanical energy has been used so far for running chemical reactions and for preparing new materials in absence of solvents. Very recently, the technology has been applied to solve environmental problems. In this paper, we describe the application of high-energy milling (HEM) for the remediation of soils contaminated by chlorinated organic compounds such as polychlorobiphenyls (PCBs) and agrochemicals like atrazine. NaBH₄ and LiAlH₄ have been successfully used for the total dehydrohalogenation of both classes of compounds, leaving a residue lower than 2 ppmw of the starting compound in the treated soil. LiAlH₄ was found to be more active than NaBH₄.     

废弃液晶屏玻璃基板的行星式球磨工艺研究

以废弃液晶屏玻璃基板为原料,研究了球磨方式和球磨时间在球磨过程中对粉料粒径分布的影响。通过对废弃液晶屏玻璃基板的行星式球磨工艺的研究,探讨了球磨方式、球磨时间等因素对球磨效果的影响,以建立玻璃粉体细化的合理球磨方式和工艺参数。     

火电站脱硫新模式--燃前煤粉在线脱硫

1999年全国二氧化硫排放总量l857万t，而火电厂SO2排放810万t，占全国SO2排放的43．6％。火电站脱硫已成为研究的热点。对火电站脱硫新模式-燃前煤粉的摩擦电选在线脱硫进行了研究论述：(1)应用摩擦电选技术与电站制粉系统集成进行火电站燃前煤粉在线脱硫降灰的原理；(2)该技术的合理性及可选性；(3)实现燃前煤粉在线脱硫降灰对锅炉燃烧特性的影响；(4)该技术的应用前景。     

Sucrose-derived catalytic biodiesel synthesis from low cost palm fatty acid distillate

The current homogeneous acid catalyst for biodiesel product however, would lead to formation of many undesirable by-products that make the post treatment of the biodiesel to be difficult and costly. Thus, sucrose-derived solid acid catalyst was developed in the present study which aims to improve the esterification process and reduce the generation of waste. The physicochemical properties of the synthesized catalysts were studied by various techniques such as, BET surface area, X-ray diffraction (XRD), temperature programmed desorption of NH₃ (TPD-NH₃), scanning electron microscopy (SEM). Response surface methodology (RSM) with central composite design (CCD) is used to determine the optimum parameters for the catalytic reaction. The experimental results showed that the catalyst exhibited good catalytic activity in the transesterification of PFAD, providing maximum biodiesel yield of 94% at optimum parameters. The better catalytic activity of the aforementioned catalyst in the biodiesel reaction could be attributed to the presence of optimal number of catalytically active acid site density on its surface.     

Graphitic carbon nitride/biochar composite synthesized by a facile ball-milling method for the adsorption and photocatalytic degradation of enrofloxacin

In order to enhance the removal performance of graphitic carbon nitride (g-C₃N₄) on organic pollutant, a simultaneous process of adsorption and photocatalysis was achieved via the compounding of biochar and g-C₃N₄. In this study, g-C₃N₄ was obtained by a condensation reaction of melamine at 550°C. Then the g-C₃N₄/biochar composites were synthesized by ball milling biochar and g-C₃N₄ together, which was considered as a simple, economical, and green strategy. The characterization of resulting g-C₃N₄/biochar suggested that biochar and g-C₃N₄ achieved effective linkage. The adsorption and photocatalytic performance of the composites were evaluated with enrofloxacin (EFA) as a model pollutant. The result showed that all the g-C₃N₄/biochar composites displayed higher adsorption and photocatalytic performance to EFA than that of pure g-C₃N₄. The 50% g-C₃N₄/biochar performed best and removed 45.2% and 81.1% of EFA (10 mg/L) under darkness and light with a dosage of 1 mg/mL, while g-C₃N₄ were 19.0% and 27.3%, respectively. Besides, 50% g-C₃N₄/biochar showed the highest total organic carbon (TOC) removal efficiency (65.9%). Radical trapping experiments suggested that superoxide radical (?O₂^?) and hole (h⁺) were the main active species in the photocatalytic process. After 4 cycles, the composite still exhibited activity for catalytic removal of EFA.     

地下水中阴离子对球磨零价铁除砷影响

研究了不同浓度下几种阴离子（NO₃^-、SO₄^2-、H₂PO₄^-、SiO₃^2-）对球磨零价铁（BZVI）除砷规律的影响,探讨了上述阴离子对BZVI氧化As（Ⅲ）能力的影响,三价砷及五价砷的转化机制,及BZVI腐蚀产物.研究证实,不同浓度的NO₃^-和SO₄^2-对砷去除效率影响不显著,但是随着H₂PO₄^-和SiO₃^2-浓度升高,溶液中As（V）分别由25.1%上升到83.6%和下降到3.8%;通过SEM和拉曼光谱分析发现,H₂PO₄^-促进BZVI的腐蚀,导致As（Ⅲ）氧化能力增强;而铁表面形成二氧化硅聚合物或非晶固相则是SiO₃^2-降低BZVI对砷氧化和吸附能力的主要机制.     

铣削工艺参数对锡铋合金表面粗糙度特征影响及试验分析

目的对锡铋合金表面粗糙度特征进行研究分析,提高表面加工质量。方法采用正交试验设计方法,以最小表面粗糙度作为优化指标,以主轴转速、铣削深度、进给速度、铣削宽度作为影响因素,进行精密铣削试验研究。结果利用方差分析确定了进给速度是锡铋合金铣削表面粗糙度最重要的影响因素,并基于田口方法优化分析得到了锡铋合金铣削加工工艺最优组合。结论采用田口法对锡铋合金铣削工艺参数优化,有效地减少了加工表面粗糙度,提高了工件表面质量。     

欧版磨粉机在脱硫石灰石制粉中的应用

环保脱硫工艺中的脱硫剂大都为石灰石粉，石灰石粉的品质、细度及粒径分布是影响脱硫效果的关键性因素之一，而选择合适的石灰石粉制备的工艺和装备则对整个脱硫过程起着至关重要的作用；本文重点介绍了欧版磨粉机制备脱硫石灰石粉的技术特点及其在环保脱硫石灰石制粉中的应用。