试论我国陆地再生能源资源及其特征

在世界矿物能源资源日趋减少的今天,再生能源资源引起人们广泛的兴趣,特别是陆地再生能源资源更是如此。本文对我国陆地再生能源资源——太阳能、风能、水能、生物质能——中的前两种能源资源进行了分区及分省计算,并依据全国已有的调查及普查资料,对后两种源能资源进行了分省及分区统计,在此基础上又对全国陆地再生能源资源的数量、分布及特征进行了对比分析,并从宏观上提出了开发利用我国陆地再生能源资源的建议和设想。     

碳钠米管纤维在新型防弹衣中的性能优势

现代高科技武器的发展以及日益复杂的作战环境对防弹衣的防弹性能和穿着舒适性提出了更高要求。新材料仍将成为下一代新型防弹衣的开发方向。本文介绍的碳钠米管纤维早在20世纪90年代就已经被发现。由于其制造成本贵比黄金而一直未被广泛使用。近年来随着工艺技术的改进及生产规模的扩大,碳纳米管的生产成本大幅降低,其开发潜能和应用前景逐渐受到材料科学界和高新技术产业部门的关注。本文在分析现代常用防弹衣防弹机理的基础上着重论述碳钠米管作为超级纤维的独特性能在防弹领域中的应用优势。     

水环境中碳纳米管对沙丁胺醇光降解的影响

选取沙丁胺醇(salbutamol,SAL)为目标污染物,研究了3种碳纳米管(CNTs,单壁碳纳米管SCNT、羟基衍生化多壁碳纳米管MWNT-OH和羧基衍生化多壁碳纳米管MWNT-COOH)对有机污染物在模拟太阳光照下降解的影响;并且研究了CNTs与天然水体中光活性物质三价铁离子(Fe3+)的相互作用.结果表明,3种CNTs能够通过竞争吸收光子,即光屏蔽作用抑制SAL光解;同时又能通过光致激发产生单线态氧(1O2)促进光解反应,两种作用机制同时存在,在绝大多数情况下,抑制作用占主导地位.此外,CNTs还能通过静电吸附作用使水体中的光活性物质Fe3+失活,从而影响有机污染物在天然水体中的光化学行为.     

微生物燃料电池改性阳极处理PTA废水

探讨了不同改性阳极对微生物燃料电池(microbial fuel cell,MFC)产电性能及其对MFC处理难降解废水能力的影响.以单室空气阴极为基础,利用0.1 g电气石、质量分数75%二氧化锰/埃洛石纳米管(manganese bioxide/halloysite nanotube,MnO_2/HNT)和多壁碳纳米管-羧基(multi-walled carbon nanotube-carboxyl,MWCNT-COOH)对MFC阳极进行修饰.结果表明,不同改性阳极的MFC对含精对苯二甲酸(purified terephthalic acid,PTA)废水的去除率均高于70%,且化学需氧量(chemical oxygen demand,COD)去除率在79%以上.相较于其他几种改性阳极,以MWCNT-COOH改性材料作阳极的MFC产生的最大输出电压最高,获得的最大功率密度最高,分别为529 mV和252.73 mW·m~(-2).     

反硝化脱硫工艺中微生物群落结构及动态分析

为了研究反硝化脱硫工艺(denitrifying sulfide removal,DSR)中微生物群落与工艺运行的相关性,实验提取了反应器运行不同阶段污泥样品中微生物的全基因组DNA,利用高通量宏基因组学技术———基因芯片来解析各阶段功能微生物群落的结构特征及其演替过程.通过对功能基因的Simpson、Shannon多样性指数和聚类分析表明,微生物群落结构会随着反应器运行的阶段进行相应调整,且变化较大.在运行的前两个阶段,由于不适应环境,微生物群落的多样性指数比起始时明显减少,随着反应器的运行污泥逐渐成熟,多样性指数迅速增加,也标志着反应器进入稳定运行阶段.通过对反硝化脱硫过程中关键基因相对丰度的分析发现,功能基因的丰度不仅能反映功能菌群的活性,而且与工艺处理效果密切相关.     

羧基化碳纳米管载铂催化剂对微生物燃料电池阴极氧还原性能的影响

阴极催化剂是影响微生物燃料电池(microbial fuel cell,MFC)性能的关键要素.为了考察不同羧基化方法改性的碳纳米管(carbon nanotube,CNT)负载Pt的催化氧还原效率,分别在80℃和95℃条件下对CNT进行了羧基化,采用浸渍-沉淀法制备了Pt/CNT催化剂(Pt/CNT-80和Pt/CNT-95),并在空气阴极MFC体系中验证了其催化氧还原效果(MFC-80、MFC-95和MFC-C).结果表明,MFC-95和MFC-80的最大功率密度分别为568.8 mW.m-2和412.8 mW.m-2,内阻分别为204.7Ω和207.7Ω,开路电压分别为0.719 V和0.651 V.而对照MFC-C的最大功率密度仅为5.4 mW.m-2,内阻为826.2Ω.XPS和XRD分析结果显示,Pt/CNT-95催化氧还原效果优于Pt/CNT-80,原因可能是95℃羧基化过程在CNT表面引入了丰富的含氧基团.     

Adsorption of lead on multi-walled carbon nanotubes with different outer diameters and oxygen contents: Kinetics, isotherms and thermodynamics

The effects of different outer diameters and surface oxygen contents on the adsorption of heavy metals onto six types of multi-walled carbon nanotubes (MWCNTs) were investigated in an aqueous solution and lead was chosen as a model metal ion. The results indicated that the percentage removal and adsorption capacity of lead remarkably increased with decreasing outer diameter due to larger specific surface area (SSA). The SSA-normalized maximum adsorption capacity (qm /SSA) and SSA-normalized adsorption coefficient (Kd /SSA) were strongly positively correlated with surface oxygen content, implying that lead adsorption onto MWCNTs significantly increases with the rise of oxygen content and decreases with decreasing SSA. The calculated thermodynamic parameters indicated that adsorption of lead on MWCNTs was endothermic and spontaneous. When the oxygen content of MWCNTs increased from 2.0% to 5.9%, the standard free energy (△ G0 ) became more negative, which implied that the oxygenated functional groups increased the adsorption affinity of MWCNTs for lead. Through calculation of enthalpy (△ H0 ), G0 and free energy of adsorption (Ea ), lead adsorption onto MWCNTs was recognized as a chemisorption process. The chemical interaction between lead and the phenolic groups of MWCNTs could be one of the main adsorption mechanisms due to highly positive correlations between the phenolic groups and K d /SSA or q m /SSA.     

氧气热处理的TiO2纳米管阵列光电催化降解亚甲基蓝的研究

采用原位阳极氧化法在Ti基底上制备了高度有序的TiO2纳米管阵列薄膜,SEM图像表明TiO2纳米管定向排列整齐,分布均匀,其管径范围在70～100 nm.XRD结果证明,阳极氧化法制备的TiO2纳米管为无定型晶型,经退火后为具有良好光催化活性的锐钛矿型.以亚甲基蓝（methylene blue）为目标物研究了TiO2纳米管光电催化性能及影响因素,结果表明,以0.1 mol/L NaCl为电解质,在氧气热处理气氛下,外加偏压为0.5 V、pH=3.25、光照强度为1 000μW/cm2、纳米管薄膜表面积为2 cm×2 cm且MB初始浓度为10 mg/L的条件下,TiO2纳米管阵列薄膜光电催化降解MB的降解效率可达99.56%.电化学阻抗谱分析显示,光电催化降解过程的速控步骤均为表面反应步骤,外加偏压减小了界面电荷转移阻抗,提高了光生载流子的分离效率.     

Monitoring aromatic hydrocarbon biodegradation by functional marker genes

The development of biological treatment technologies for contaminated environments requires tools for obtaining direct information about the biodegradation of specific contaminants. The potential of functional gene array analysis to monitor changes in the amount of functional marker genes as indicators of contaminant biodegradation was investigated. A prototype functional gene array was developed for targeting key functions in the biodegradation of naphthalene, toluene and xylenes. Internal standard probe based normalization was introduced to facilitate comparison across multiple samples. Coupled with one-colour hybridization, the signal normalization improved the consistency among replicate hybridizations resulting in better discrimination for the differences in the amount of target DNA. During the naphthalene biodegradation in a PAH-contaminated soil slurry microcosm, the normalized hybridization signals in naphthalene catabolic gene probes were in good agreement with the amount of naphthalene-degradation genes and the production of 14CO2. Gene arrays provide efficient means for monitoring of contaminant biodegradation in the environment.