β-环糊精接枝羧甲基壳聚糖吸附剂的制备及其性能

采用γ-氨丙基三乙氧基硅烷化学修饰活化后的硅胶,以戊二醛为交联剂,接上羧甲基壳聚糖,继而接枝上β-环糊精作为功能单体,制备了一种用于分离富集水样中Cu(Ⅱ)的固相萃取新材料。利用红外光谱(FT-IR)、比表面分析(BET)、X射线衍射光谱(XRD)以及热重分析(TG)等方法对吸附剂进行结构表征。采用火焰原子吸收(FAAS)作为检测手段,考察了溶液p H、振荡时间、吸附剂用量、样品流速、洗脱液浓度和体积等对吸附剂吸附Cu(Ⅱ)的影响。吸附剂饱和吸附容量为9.37 mg/g,最大富集倍数高达350。吸附过程能用准二级动力学模型和Langmuir等温吸附方程进行很好的拟合。应用于环境水样中Cu(Ⅱ)的分离富集与测定,回收率在96.8%~105.2%之间,效果较好。     

高效液相色谱-串联质谱法同时检测地表水中13种药物及个人护理品

采用高效液相色谱-串联质谱(HPLC-MS/MS)检测,建立了地表水中13种药物及个人护理品的测定方法。水样用盐酸与氢氧化钠溶液调p H值至7.0左右,过固相萃取小柱进行富集,用14 m L甲醇洗脱。以C18柱为分离柱,0.01%甲酸的甲醇-0.01%甲酸水溶液为流动相,目标物在10 min内分离,在0.50~250μg/L范围内,13种化合物峰面积与内标物质峰面积之比与质量浓度的线性关系良好(0.99),检出限在0.05~0.5 ng/L范围内。基质加标实验结果表明,13种化合物在水中的回收率分别在56.2%~123.2%之间(加标水平5 ng/m L)和58.0%~107.8%(加标水平50 ng/m L),相对标准偏差在1.60%~19.9%(n=6)之间。应用该方法测定了从2条纳污河流采集的10份水样,结果表明,除美托诺尔和普洛萘尔未被检出外,其余11药物的检出频率在30%~100%之间。在13种目标物质中,咖啡因的检测浓度最高达287.5ng/L,舒必利次之,为277.5 ng/L。本方法快速、准确,适用于地表水中PPCPs类的快速测定。     

SPE-HPLC法测定水中硝基苯酚类化合物

建立了以固相萃取为前处理条件,用液相色谱法测定水中10种硝基苯酚类化合物的分析方法。实验使用HLB(6 L/150 g)固相萃取柱富集水样中的目标化合物,二氯甲烷与乙酸乙酯体积比1:2的混合溶剂洗脱,采用Phenyl柱(4.6 mm×250 mm,5 μm)分离目标化合物,以乙腈(1%甲酸)/水(1%甲酸)为流动相进行梯度洗脱,二极管阵列检测器检测。10种硝基苯酚类物质在0.02~10 mg/L范围内呈现良好的线性。方法检出限为0.1~0.3 μg/L,水样加标相对标准偏差为5.19%~18.2%,平均加标回收率为49.8%~124%。该方法适用于水中10种硝基苯酚类化合物的测定。     

气相色谱-串联质谱法测定沉积物中多环芳烃

采用ASE法提取沉积物中16种多环芳烃,以固相萃取法净化提取液,用气相色谱-串联质谱法测定。通过优化测定条件,使方法在5.00μg/L~1 600μg/L范围内线性良好,方法检出限为0.15μg/kg~0.66μg/kg。空白石英砂的加标回收率为61.9%~121%,7次测定结果的RSD为2.6%~11.1%。     

水环境中26种类固醇激素的分析方法研究

建立了固相萃取-超高效液相-串联质谱法同时测定水环境中26种类固醇激素的分析方法。明确了取样体积为500 m L,Cleanert PEP为富集柱,乙酸乙酯为洗脱剂,甲醇为溶剂进行提取操作。选择了正离子模式,以0. 1%甲酸/甲醇-水为流动相,负离子模式以0. 1%氨水/乙腈-水为流动相,试样经AcquityTMUPLC BEH C18色谱柱分离后,选用质谱检测模式进行定性、定量分析。通过方法验证,26种类固醇激素的方法检出限为0. 3～1. 5 ng/L,测定下限为1. 2～6. 0 ng/L,代表性样品测定结果的相对标准偏差为2. 6%～13. 7%(n=6),加标回收率为71. 2%～121%。该方法操作便捷,灵敏度高,精密度和准确度良好,可适用于水环境中多种痕量、超痕量类固醇激素的定性定量分析。     

Morphological characteristics of flashing jet throughout superheated liquid release

Many release problems involve two-phase releases of hazardous materials of superheated liquids with high energy into the atmosphere. Such accidents are accompanied by violent phase transition and form catastrophic flashing jets. In this work, experimental and theoretical analyses were conducted to investigate dynamic characteristics of flashing jet morphology and their dependence on pressure-decay dynamics under different storage pressures, superheats, and nozzle diameters. Flashing jet morphology and angle throughout two-phase releases were captured by a high-speed camera, and the corresponding source pressure in the superheated liquid tank was measured simultaneously. Results show that three typical phases, expansion, stabilization, and decay, are characterized throughout two-phase release based on the evolution of flashing jet morphology. The jet initially expands gradually due to the enhancement of phase transition intensity, and then keeps stable when the intensity reaches its maximum, and terminally decays rapidly due to the depletion of superheated liquid. Phase transition intensity at the nozzle exit is mainly controlled by the pressure-decay dynamics. Bubbles nucleation inception sites gradually move upstream of the nozzle during the pressure decay process increasing the phase transition intensity. The increase of storage pressure, superheat and nozzle diameter promotes the mechanical and thermodynamic effects on the jet breakup. The significant increase of mechanical and thermodynamic effects effectively accelerates droplets evaporation and further affects flashing jet morphology.     

Social representations of governance for change towards sustainability: perspectives of sustainability advocates

There is a substantial body of literature on public understandings of large-scale ‘environmental’ phenomena such as climate change and resource degradation. At the same time, political science and economics analyse the governance arrangements to deal with such issues. These realms of research rarely meet: there has been little research into people’s understandings of the governance of environmental change. This study adds a psychological perspective to governance research by investigating social representations of governance that promotes societal change towards sustainability, and related practices. It examines data from qualitative interviews with sustainability-interested people in seven European countries (n = 105). The analysis identified building blocks of representations suitable as an analytical framework for future research on governance representations. The diversity of their content reflected a range of pathways to societal change. Representations often seemed to have a creative function as a guiding vision for individuals’ own practices, but their wider transformative potential was constrained.     

锐钛矿-金红石混合晶型TiO2降解气相苯

用溶胶-凝胶法并通过控制煅烧温度合成不同晶相比的混合晶型纳米TiO_2,在紫外光光照下降解气相苯。考察了苯初始质量浓度、紫外灯光照强度和催化剂加入量对苯去除率的影响;探究了光催化降解气相苯的动力学特征。结果表明:450℃煅烧制备的催化剂降解苯效率最高,此催化剂金红石相质量分数为6.30%;在苯初始质量浓度为74.39 mg/m~3、催化剂加入量为7 g、光照强度为2.18 klux的最佳条件下反应84 min,苯去除率达99.73%;光催化降解率与光照强度之间符合0.5级动力学特征;当催化剂加入量为3 g时,单位时间单位质量催化剂降解苯的质量最多;苯的光催化降解反应均符合一级动力学方程。     

固相萃取-高效液相色谱法测定水中丙烯酰胺研究

采用固相萃取-高效液相色谱法对水中的丙烯酰胺定性、定量分析。结果显示:丙烯酰胺含量在20μg/L~400μg/L之间呈良好线性关系,回归方程Y=0.476 8X+0.845 4,相关系数R为0.997 72,检出限0.1μg/L,样品回收率在71.85%~92.28%之间,相对标准偏差为3.4%~10.9%。该方法减少了有机溶剂用量,缩短了有机溶剂暴露时间,降低污染,且能满足地表水环境质量标准(GB 3838-2002)限值要求,是水中丙烯酰胺含量准确稳定的检测方法。用该方法测定了呼和浩特市引黄入呼左岸、右岸、中浅和中深4个断面水样,均未检出丙烯酰胺。     

1987-2006年厦门市土地利用变化检测分析

通过对厦门市五个时相的土地利用变化检测,分析了厦门市1987年-2006年间各分区的土地利用变化及各地类在各年间的变化情况,并分析其变化原因.