省会城市机动车环保监管部门管理对策研究

贵阳市机动车排气污染防治管理中心成立以来,在机动车环保监管方面做了许多有益的探索和思考,得到国家环保部、省环保厅的充分肯定和表扬,得到了市民的大力支持,先后有长春、昆明、重庆等多个省会城市前来学习调研。文章简述了全国省会城市机动车环保监管现状;介绍了贵阳市机动车排气污染防治管理中心的运行管理情况,分析管理过程中存在的问题和积累的经验;提出修改完善地方法规、强化机构能力建设、制定从业资质认定地方标准等管理对策和建议。     

基于GIS的太原市街道机动车污染物空间分布特征分析

在研究太原市机动车污染现状的基础上,结合太原市机动车排放因子模型Mob ile6和污染物扩散模型OSPM的计算结果,在G IS平台上绘制了太原市冬夏两季道路机动车污染物排放强度分布图和道路交通污染物浓度分布图,并对可视化结果作了科学的分析,研究结果表明：（1）太原市冬季街道污染总体上要高于夏季,这种趋势以CO的表现尤为明显;（2）街道NOX小时浓度超标率比CO小时浓度超标率更高,在研究的56条路段中,CO小时浓度都没有超过国家二级标准,NOX小时浓度超标率达38.9%（夏季）;（3）NOX污染主要集中在中心区,而建成区周边道路某些路段污染也较严重。     

电动单梁起重机吊具冲顶引发起升电机坠落事故分析

针对一起电动单梁起重机吊具冲顶并引发起升电机坠落的起重作业事故,分析了事故起重机电气控制系统和现场紧急处置中存在的问题,指出了导致事故发生的直接原因和主要原因;并从完善起重机电气控制系统本质安全性和加强起重机械使用安全管理的角度提出了相应建议和意见,对预防类似事故的发生具有借鉴作用。     

基于我国规范与PIARC标准的公路隧道需风量分析

以某长大高速公路隧道为例,结合我国隧道通风设计规范JTJ026.1-1999与PIARC2007标准(世界道路协会),针对不同行车速度,不同车辆更新情况、不同排放标准组合形式以及是否考虑NOx等情况,对各个不同工况的需风量分别进行计算,并从需风量计算方法、机动车排放量和污染物设计浓度三个方面对隧道需风量差异进行分析。研究结果表明:我国设计规范与PIARC2007存在较大差距,为了适应当前及今后我国交通量及机动车排放特点的发展趋势,我国现行规范应在机动车排放量、污染物设计浓度限值等方面做出必要改进以达到合理确定隧道需风量的目的。     

IVE机动车排放模型应用研究

对IVE模型进行了系统分析和介绍,以北京市为研究对象给出了模型的主要输入参数的确定方法和思路,运用IVE模型对北京市不同车型车队的排放进行计算。结果显示：公交车和卡车的排放因子明显较高,特别是颗粒物排放因子,分别为普通轻型车的14和44倍。北京市机动车的CO、VOC、NOx和PM的平均日排放总量分别为2767.4、182.5、353.8和7.1t。对于CO和VOC,普通轻型车的分担率分别为42.0%和34.7%;对于NOx和PM而言,卡车的贡献率最高,分别达到66.3%和83.0%。此外,比较了IVE模型与MOBILE6模型的方法和计算结果,讨论了IVE模型在我国的主要应用优势。     

Development of a fuel cell propulsion system for the existing Mercedes B-Class 160 of petrol driven car

This paper presents a theoretical comparison between fuel cell (FC) power train and conventional petrol driven propulsion system. FC has potential to reduce the CO₂-emissions from road. However, FC power trains require energy storing device, to meet the peak power during extreme drive situations and also able to recover the kinetic energy of the vehicle during break operation. The proposed system includes a polymer electrolyte membrane fuel cell (PEMFC) based drive train and a super capacitor connected in parallel. The system is designed and dimensioned for a conventional petrol driven propulsion system of the Mercedes B-Class160. The feasibility study also includes comparison between the existing conventional systems. It is shown that although FC power train is heavier compared to existing system, urban performance is better and produces no CO₂ and other harmful emissions.     

Suicide by crashing into a heavy vehicle: Focus on professional drivers using in-depth crash data

Objective: Road traffic suicides typically involve a passenger car driver crashing his or her vehicle into a heavy vehicle, because death is almost certain due to the large mass difference between these vehicles. For the same reason, heavy-vehicle drivers typically suffer minor injuries, if any, and have thus received little attention in the research literature. In this study, we focused on heavy-vehicle drivers who were involved as the second party in road suicides in Finland.

Methods: We analyzed 138 road suicides (2011–2016) involving a passenger car crashing into a heavy vehicle. We used in-depth road crash investigation data from the Finnish Crash Data Institute.

Results: The results showed that all but 2 crashes were head-on collisions. Almost 30% of truck drivers were injured, but only a few suffered serious injuries. More than a quarter reported sick leave following their crash. Injury insurance compensation to heavy-vehicle drivers was just above €9,000 on average. Material damage to heavy vehicles was significant, with average insurance compensation paid being €70,500. Three out of 4 truck drivers reported that drivers committing suicide acted abruptly and left them little opportunity for preventive action.

Conclusions: Suicides by crashing into heavy vehicles can have an impact on drivers’ well-being; however, it is difficult to see how heavy-vehicle drivers could avoid a suicide attempt involving their vehicle.     

Characteristics of animal-related motor vehicle crashes in select National Park Service units—United States, 1990–2013

Objectives: Nationally, animal–motor vehicle crashes (AVCs) account for 4.4% of all types of motor vehicle crashes (MVCs). AVCs are a safety risk for drivers and animals and many National Park Service (NPS) units (e.g., national park, national monument, or national parkway) have known AVC risk factors, including rural locations and substantial animal densities. We sought to describe conditions and circumstances involving AVCs to guide traffic and wildlife management for prevention of AVCs in select NPS units.

Methods: We conducted an analysis using NPS law enforcement MVC data. An MVC is a collision involving an in-transit motor vehicle that occurred or began on a public roadway. An AVC is characterized as a collision between a motor vehicle and an animal. A non-AVC is a crash between a motor vehicle and any object other than an animal or noncollision event (e.g., rollover crash). The final data for analysis included 54,068 records from 51 NPS units during 1990–2013. Counts and proportions were calculated for categorical variables and medians and ranges were calculated for continuous variables. We used Pearson’s chi-square to compare circumstances of AVCs and non-AVCs. Data were compiled at the park regional level; NPS parks are assigned to 1 of 7 regions based on the park’s location.

Results: AVCs accounted for 10.4% (5,643 of 54,068) of all MVCs from 51 NPS units. The Northeast (2,021 of 5,643; 35.8%) and Intermountain (1,180 of 5,643; 20.9%) regions had the largest percentage of the total AVC burden. November was the peak month for AVCs across all regions (881 of 5,643; 15.6%); however, seasonality varied by park geographic regions. The highest counts of AVCs were reported during fall for the National Capital, Northeast/Southeast, and Northeast regions; winter for the Southeast region; and summer for Intermountain and Pacific West regions.

Conclusions: AVCs represent a public health and wildlife safety concern for NPS units. AVCs in select NPS units were approximately 2-fold higher than the national percentage for AVCs. The peak season for AVCs varied by NPS region. Knowledge of region-specific seasonality patterns for AVCs can help NPS staff develop mitigation strategies for use primarily during peak AVC months. Improving AVC data collection might provide NPS with a more complete understanding of risk factors and seasonal trends for specific NPS units. By collecting information concerning the animal species hit, park managers can better understand the impacts of AVC to wildlife population health.     

The implementation of a measurement system for brushless DC motor parameters

Most of the energy conversion in industrial devices and equipment is completed by the motor. The acquirement of motor parameters becomes very important for designing the motor drives. The aim of this paper is to design and implement a motor measurement system. Through the processing of an Advanced RISC Machines (ARM) microcontroller, the various parameters of motors such as input voltage, input current, input power, motor speed, and motor torque can be obtained. Consequently, the torque constant, load torque, viscous friction, and the inertia of the motor are calculated and achieved. The motor parameters can be commanded and displayed in the designed human interface of a PC via USB communication. The hardware system designed in this system includes an ARM microcontroller, an inverter, a voltage sensor, a current sensor, a torque sensor, and power supply. The software programming is developed under the Visual Studio 2012 environment development platform using the C language. Finally, the prototype of the motor measurement system is completed and verified. The experimental results for the motor parameters and torque/speed characteristic are demonstrated and show the feasibility of the complete designed system.     

某型机车牵引电机传动端轴承低速轻载无飞溅润滑试验研究

主要根据客户要求,在低速(1 km/h)及轻载工况下,测量传动端轴承无飞溅润滑条件下的温升等参数,而进行相关的电机试验,为某型机车牵引电机传动端轴承在低速及轻载工况下,无飞溅润滑提供试验验证及技术支撑。