河口切变锋引起的滩槽泥沙交换效应

切变锋是河口湾锋系中最为常见和最易观察到的锋面类型。本文对长江口的切变锋进行现场观察和滩，槽同步水文资料分析，简述了长江口切变锋发生的部分和基本特性，提出了切变锋引起的滩，槽泥沙呈现螺旋形交换形式等论点。     

Measuring bed shear stress along vegetated river beds using FST-hemispheres

The measurement of the bed shear stress along vegetated river beds is essential for accurately predicting the water level, velocity and solute and sediment transport fluxes in computational hydroenvironmental models. Details are given herein of an experimental and theoretical study to determine the bed boundary shear stress along vegetated river beds introducing a novel field measuring method, namely the FliessWasserStammtisch (FST)-hemispheres. Although investigations have been conducted previously for sedimentary channels using the FST-hemispheres, this preliminary study is thought to be the first time that such hemispheres have been used to investigate the bed shear stresses in vegetated channels. FST-hemispheres were first developed by Statzner and Müller [1989. Standard hemispheres as indicators of flow characteristics in lotic benthos research. Freshwater Biology 21, 445-459] to act as an integrated indicator of the gross hydrodynamic stresses present near the bed. Test and validation data were found to be at least of the same order of magnitude for the stresses predicted from literature for sedimentary channels, with this study establishing the commencement of a database of calibrated FST-hemisphere laboratory data for vegetated channel beds. In a series of experiments, depths ranging from 0.1 to 0.28m were considered, equating directly to comparable conditions in small rivers or streams. The results of this study provide a basis for enabling the FST-hemispheres to be used to evaluate the boundary shear stress for a wider range of applications in the future, including vegetated river beds.     

政和—大埔断裂带基本特征及其演化模式

政和—大埔断裂带经历多期复杂的构造变形变质作用,不同地段的时空演化特征有所差异,总体上可划分为四个演化阶段。即:①前加里东期(?)—加里东期韧性剪切变形变质作用(D_1),发生于中、下地壳,是顺层剪切(固态流变)的结果,为纯韧性变形,②印支期韧性剪切变形变质作用(D_2)——政和—大埔断裂的形成,以平移型剪切为主,形成S——C糜棱岩,为半韧性变形环境;③印支末期—燕山早期逆冲—推覆作用(D_3),为多层次逆冲推覆,东部所谓的“天窗”部分为这一时期逆冲岩片的残留体,随着早燕山期花岗岩的侵入逐渐过渡到伸展拆离环境,同时西部推覆体后缘出现拉张,形成有限的火山岩盆地,为半脆性—脆性变形环境;④燕山期(—喜山期)伸展—拆离作用(D_4),在相对年轻的拆离断层之下出露变质核杂岩(如稻香组和熊山岩体),并形成裂陷盆地堆积(梨山组),东部部分“天窗”属这类成因,形成环境跨度大,为半韧性→半脆性→脆性。     

安徽张八岭地区构造演化及动力学

对张八岭地区的构造特征、演化及其动力学有不同解释。通过1：5万张八岭幅、珠龙幅区域地质调查．从地层、岩石组合、岩石化学、岩浆岩、构造变形和变质等研究认为．该区从中新元古代起，经历了成谷、沉积．下沉、顺层剪切、深部熔融、塑性流动、层间褶皱．叠加折劈、宽缓褶曲、逆掩推覆，壳层滑动、熔融成浆、聚浆热隆、侵入或喷发．剥蚀夷平、堆积充填等铸成现今地貌景观．引起上述构造特征和演化的动力源自重力、热力和地球自转速率变化的惯性离心力等的结合与转化，它们在每个阶段各自所起的作用不同，就产生不同构造特征，推动区域构造演化．     

爆炸荷载作用下岩石的变形与破坏研究（I）

无论是矿山工程、隧道工程中钻孔爆破效率的提高、工程爆破领域爆破振动参数的预测，还是最近一系列高技术常规局部战争中粘地炸弹对地下坚固目标的破坏，在不考虑岩石中强爆炸引起的光子和电磁辐射等极端效应情况下，都亟待要求对岩石中爆炸引起的应力、变形及其它运动参数和破坏效应作出比较准确的评估。目前对此问题的研究尚只能达到大致的机理及景象的定性认识和描述，定量上的确定存在数量级的误差，尤其是爆炸和冲击的近区。误差更大。其原因在于岩石中爆炸产生的变形和破坏特征，不仅与作用时发生相应的物理及力学运动密切相关，而且强烈地受岩石自身构造缺陷水平及其变化的制约。本文概迷了爆炸作用下岩石的动力变形与破坏研究之现状。研究中考虑了岩石的构造特点及其对基本力学性状的影响，并简述了其研究的新趋向。     

粉煤灰最大往返剪切作用面上应变破坏标准的应力条件

基于文献[1]提出的最大往返剪切作用面上的液化应力条件和粉煤灰的动三轴试验数据,运用回归分析方法拟合曲线及相关参数建立了粉煤灰的破坏应力条件,并应用F检验法对参数的回归效果进行了检验,检验结果表明参数的回归效果高度显著。得出的破坏应力条件表明初始剪应力与动剪应力的倒数间并不呈线性关系,而是二次多项式关系,这与张克绪所提出的应力条件存在着差异。因此,可初步认为张克绪的液化应力条件不能直接运用于粉煤灰。     

流体剪切与超声空化破解剩余污泥的参数优化

为提高剩余污泥的破解效果并降低能耗,采用FS（fluid shear,流体剪切）、UC（ultrasonic cavitation,超声空化）、FS和UC联合工艺（FS-UC,UC-FS）破解剩余污泥,并应用单因素试验结合响应面法对联合工艺进行优化.结果表明:FS对剩余污泥破解效果一般,只在开始阶段具有较好效果,随作用时间延长,破解效果未有显著提高甚至下降.UC对剩余污泥破解效果明显,随作用时间延长,破解效果显著提升,但能耗也随之增大,EDR（energy disintegration ratio,效能比）明显下降.相同作用时间下,UC破解效果优于FS破解效果,UC破解剩余污泥的DD_COD（degree of disintegration,破解率）与EDR均明显高于FS方法.单因素试验得出的较优FS作用时间范围为2~8 min,较优UC作用时间范围为5~15 min.响应面法试验结果显示,联合工艺的剩余污泥破解效果和能量利用率均优于单一方法,联合工艺中FS-UC工艺的破解效果优于UC-FS工艺.FS-UC工艺的最佳参数:FS处理5.6 min再UC处理15.0 min,该条件下剩余污泥实际DD_COD为50.8%,EDR为26.8%.UC-FS工艺的最佳参数:先UC作用15.0 min再FS作用7.8 min,该条件下剩余污泥实际DD_COD为36.5%,EDR为17.1%.研究显示,以DD_COD和EDR为指标,4种工艺的高效性顺序为FS-UC > UC-FS > UC > FS,其中FS-UC工艺具有能耗低、破解效率高的特点,是4种工艺中剩余污泥破解效果最好的一种工艺.      

Shear cutting and counter shear cutting of sandwich materials

New lightweight sandwich materials challenge existing forming processes as well as following process steps. As such the manufacturing potential of shear cutting has to be evaluated. Two cutting methods are compared. Method commonly used is shear-cutting within one stroke engaged, the other one is known as counter-shear cutting, which uses two strokes.The challenges of cutting sandwich materials are variation of hole diameter within the different layers, fraying of the textiles, deformation of the hole contour and burr formation. These effects occur in conventional shear cutting as the intermediate layer and the lower sheet metal are cut by the scrap of the upper sheet instead of the cutting punch.The following methodology included shear cutting with closed cutting edge i.e. cutting of holes into five different sandwich materials. The sandwiches exemplarily represent multiple kinds of possible material designs. For instance, aluminum and steel face sheets, different thicknesses of intermediate layers and different intermediate layers materials such as integrated textile fibers have been used. Adequate cutting parameters such as die clearance and the use of a blank holder have been determined. To achieve good results a stiff machine design with good guidance and precise control of punch position was crucial.Observations of conventional shear cutting revealed the need of small cutting clearance of 4%. High burnish area is possible for the upper face sheet due to the superimposed force by the lower face sheet. The major conclusion depicted that high cutting quality of sandwich materials requires counter shear cutting. Hence, the roll-over of the lower sheet facing the intermediate layer, the burnish area at the lower sheet, good cutting quality of the fibers improve significantly and burr formation is avoided completely. Summarized this paper provides cutting parameters for sandwich materials based on experimental work.     

基于悬臂梁力学模型分析高边坡危岩体的稳定性——以四川省三清村高边坡W1危岩体为例

四川省苍溪县三清村高边坡的稳定性对当地居民的人身安全构成了威胁,需要对高边坡进行稳定性分析和评价。本文针对三清村高边坡自来水厂段W1危岩体,采用悬臂梁力学模型对其稳定性进行了定量计算及分析,结果表明:将计算所得的W1危岩体截面的最大剪切应力与截面允许的最大剪切应力进行对比,可以判断W1危岩体在自然条件下处于稳定状态,在暴雨和地震条件下处于不稳定状态,该结果与野外的宏观判断结论基本一致。     

再悬浮过程中河流底泥PAHs的迁移与释放

利用再悬浮模拟(particle entrainment simulator,PES)装置模拟了河流底泥在受到上层扰动力后的再悬浮过程.结果表明,沉积物性质如粒径组成及PAHs含量对沉积物再悬浮过程中PAHs的释放影响显著.再悬浮过程中上覆水体总悬浮颗粒物(total suspended solids,TSS)含量与颗粒态PAHs之间存在极显著相关关系.切应力对再悬浮过程中PAHs释放的影响体现在两方面.一方面,单位体积的颗粒态PAHs随切应力增大而增大;另一方面,悬浮颗粒上PAHs的富集效应随切应力增大而减弱,是由于切应力强烈导致吸附作用弱的大颗粒进入水体.上覆水体中的PAHs总量在一段时间上升后于120 min或240min趋于稳定,而颗粒态与溶解态之间具有良好响应.高低环PAHs释放行为差异显著,由于中高环PAHs的疏水性,上覆水体中检测到的多为3~4环个体.