Usage of polystyrene disposable food dishes in the lightweight concrete making

The increasing use and subsequent accumulation of polystyrene containers has triggered a substantial environmental problem. This study investigated using varied percentages of solid waste polystyrene disposable food dishes in the production of lightweight concrete samples with 350 kilograms per cubic meter (kg/m³) of cement and a density of 1,300 kg/m³. The polystyrene disposable dishes were ground into beads of 0–3 millimeters (mm) and 3–6 mm in size. First, the characteristics of Type II Portland cement, polystyrene, and aggregates were examined. The following characteristics of concrete using ASTM International and British Standards Institution standards were tested: slump, compressive strength, ability to resist chloride ion penetration, and resistance of concrete to rapid freezing and thawing cycles. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy analytical techniques were also used. The slump of samples varied between 40 and 70 mm and was not dependent on either the polystyrene percentage or the size of the polystyrene beads in the concrete samples (p‐value > .05). The compressive strength of the concrete samples after 90 days of curing, and using different percentages of polystyrene, varied between 96 and 113 kilograms per square centimeter (kg/cm²). The resistance of the samples to the freezing and thawing cycle and chloride ion penetration were affected unfavorably by the presence of the polystyrene. The SEM technique indicated that concrete samples containing 15% and 25% polystyrene had denser crystals and less void than concrete samples with 40% and 55% polystyrene.     

北京市典型废弃物焚烧源2010—2017年二NFDA1英排放特征和减排效果分析

分析2010—2017年北京市三类典型废弃物焚烧源的废气二NFDA1英排放监测数据,计算排放因子和排放量,评估减排政策成效,并分析不同排放源达标排放时同类物分布特征异同和变化规律,探讨影响排放的重要因素。结果表明: 5家焚烧源平均排放浓度为 0.008～0.069 ng/m³(以TEQ计,下同),废气二NFDA1英排放因子为 0.027～1.7 μg/t,2016年向空气中排放的二NFDA1英量为 0.002 5～0.058 g；生活垃圾、危险废物和医疗废物焚烧源的低、高氯代同类物质量分数比的平均值分别为接近于 0.5、大于0.5和小于0.5,危险废物焚烧源的 ∑PCDFs、∑PCDDs质量分数比的平均值大于2； 123478-HxCDF和123678-HxCDF质量浓度接近且线性相关,具有相近的生成机理和去除效率； I-TEQ变化趋势与∑PCDFs质量分数的变化趋势基本一致,活性炭喷射和布袋除尘的去除效率是影响二NFDA1英排放的重要因素之一；危险废物焚烧源HWI1随运行时间增加排放浓度增加,而及时更换烟道管壁有助于消除“记忆效应”的不良影响。     

我国污染物总量控制制度改革的思考

污染物总量控制制度是我国环境保护制度的重要组成部分。结合污染物总量控制制度的实施现状,分析实施过程中减排基数、核算体系、责任主体等方面存在的问题。提出,改革现行污染物总量控制制度,将总量控制与改革中的排污许可制相融合,落实企业主体责任,将总量指标与环境质量改善挂钩,建立差异化的减排核算体系,并加强日常监管,达到改善环境质量的目标。     

Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

高应力巷道底臌变形机理及控制技术分析

为了分析高应力巷道底臌变形机理，以铜川玉华煤矿2407工作面巷道为研究背景，采用理论分析和现场观测相结合的研究方法。根据巷道底臌主要由原岩应力、支承应力、围岩遇水膨胀、流变作用而引起进行分析，推导出计算底臌量的表达式。针对玉华煤矿高应力巷道底臌变形，提出在巷道顶板采用锚网梁索支护，帮部采用锚网支护的原支护条件下，底板采用锚杆注浆和切槽联合支护方式控制底臌。现场观测结果表明:这种联合支护方式能够有效控制巷道底臌变形，底臌量降低了61.5%。将底臌量理论解与现场监测的结果进行比较，误差小于8.93%，验证了理论的合理性，为巷道底臌量分析提供了参考。     

深部煤层钻屑粒度随钻进深度分布规律

为了研究煤层钻屑粒度随钻进深度分布规律，选取具有冲击危险性的平煤八矿己15煤作为研究对象，采取钻屑量测试和孔口瓦斯浓度监测，通过筛分实验煤样并应用Rosin Rammler分布模型，探究了钻屑粒度和钻屑量大小随孔深变化关系，分析不同点钻屑粒度分布特征。结果表明:小于0.075 mm钻屑粒度分布随孔深变化与钻屑量变化规律相吻合；不同钻孔随深度变化分别对应不同Rosin Rammler分布函数，随着应力过渡越平缓，粒径分布宽度系数n值越小，煤体应力越大粒径相关系数D越大；不同范围钻屑粒度占比大小也会影响钻屑量大小；在钻屑量较大时，孔口瓦斯体积分数会出现增高现象。通过对钻屑粒度分布规律分析，更好地了解深部煤体应力分布，有助于冲击危险的预警。     

水中总氮测定方法存在问题的研究及改进

碱性过硫酸钾消解紫外分光光度法测定水中总氮采用的消解器皿是玻璃比色管,易造成空白偏高、结果偏低等问题。采用双圆柱状的消解杯对水样进行消解。结果表明,消解杯消解水中总氮,线性相关系数均大于0.999,检出限为0.05 mg/L,相对标准偏差小于5%,相对误差为0.88%~1.00%;改进后的消解器皿具有较好的精密度和准确度,能够更加准确测定水中总氮的含量。     

基于3S技术对太湖底质及水质总磷的研究

应用3S技术研究了太湖底质与水质总磷(TP)的分布情况,并结合水华频次分析了其相关性。结果表明:2016—2018年,太湖底质TP年均值在433~537 mg/kg波动,水质TP年均值从0.064 mg/L上升至0.087 mg/L。从空间分布来看,底质TP、水质TP和水华频次均呈现“西高东低”的规律,太湖西部区尤其是竺山湖区是需要开展治理的重点区域。3年间,太湖西部区水质TP上升,而底质TP与入湖河流TP下降,说明内源磷污染是太湖西部区水质TP升高的主要原因,须加强科学清淤。     

铁磁流体对煤粒瓦斯解吸性能影响实验研究*

为探究铁磁流体对煤体瓦斯解吸性能的影响，采用水浴恒温吸附解吸系统，开展0.44，0.65，1.14 MPa 3组不同平衡压力下加铁磁流体前后的瓦斯解吸对比实验，根据Langmuir方程经验公式计算瓦斯极限解吸量和初始扩散系数，分析铁磁流体对煤体瓦斯解吸影响的机理。结果表明:在3组不同平衡压力下加入铁磁流体后瓦斯极限解吸量由2.5，10，20 mL/g降低为2.22，3.33，10 mL/g，降低11.2%，66.7%，50%；初始扩散系数由0.997 1，1.629 9，3.888 3 μm2·s降低为0.685 5，0.997 1，2.933 5 μm2·s，降低31.25%，38.82%，24.56%。在铁磁流体的作用下，煤体瓦斯解吸性能得到大幅降低。     

成渝高速铁路地面三向振动总值特性分析

为研究高速铁路地面三向振动总值特性,选择成渝高速铁路某路堤段和桥梁段进行了现场地面三向振动测试,分析了振动总值随距离的变化特性。结果表明,路堤段和高架桥段计权和未计权振动总值均随距离增加而近似呈负指数衰减,近场衰减快,远场衰减缓慢;路堤段和高架桥段计权振动总值与Z振级随距离的变化规律类似,且近场两者之间的差值较小,当评价高速铁路运营振动的环境影响时,近场可用Z振级近似代替计权振动总值。