Hydrochemistry of drinking water sources and water purifiers in relation to epidemiological study in Hisar,North-West India

The concern related to the drinking of reverse osmosis (RO) water containing low levels of minerals is growing day by day. This study involves the analysis of water samples from various drinking water sources in a rural site, Mirchpur village, an Indus Valley civilization site (grid location: 29° 18′ 42.3″ N, 76° 10′ 33.0″ E) of Hisar, India, along with the health survey of human subjects. The hydrochemistry of water collected from hand pumps, river canals, tube wells, submersibles, and the RO systems installed in various homes was explored for pH, EC, TH, TDS, turbidity, cations (Na⁺, Ca²⁺, Mg²⁺), anions (CO₃²⁻, HCO₃⁻, Cl⁻, SO₄²⁻, NO₃⁻, F⁻), and elements (Fe, Pb, Se) employing the ion chromatography, flame photometry, and ICP-AES techniques. Lead (Pb) and Selenium (Se) were detected in trace amounts (0.30–2.6 μg L⁻¹; 0.10–4.1 μg L⁻¹, respectively) in all the samples, including the samples collected from RO purifiers, but Iron (Fe) was not detected in RO samples even in trace amounts. The F-levels in hand pump water (HPW) and submersible water (SW) (1.9  and 1.7 mg L⁻¹, respectively) and TDS levels in SW (3048 mg L⁻¹) were found to be above WHO and BIS safe limits. TDS levels in the river canal (900 mg L⁻¹), tube well (1104 mg L⁻¹), hand pump (1170 mg L⁻¹), and submersible samples (3048 mg L⁻¹) were found significantly higher as compared to the RO personal water (ROPW; 216 mg L⁻¹) and RO supply water (ROSW; 90 mg L⁻¹). The collected epidemiological data reveals that 21%, 19%, 13%, and 12% of natives reported skin, kidney, hair fall, liver, and stomach issues, respectively, suspecting the crucial role of high TDS and fluoride levels in the area. This study also provides a comparison between the quality of RO and the direct supply water, along with correlation matrices for different parameters, which gives a rationale for the limitations of drinking direct supply water without any purification and RO water containing low mineral content.     

郑州市土壤与绿色植物中汞的分布特征

汞污染具有生物积累性,因而得到社会广泛关注。研究监测和评估了郑州市城区土壤和绿色植物叶片中汞浓度、分布、污染水平等。研究发现郑州市主城区土壤总汞浓度为0. 150～0. 958 mg/kg,平均浓度为0. 448 mg/kg;郑州市主城区绿色植物叶片总汞浓度为0. 017～0. 249 mg/kg,平均浓度为0. 107 mg/kg;土壤和叶片中汞浓度按功能区排序为交通枢纽区工业区商业区行政区高教区住宅区。采用地累积指数法对郑州市80个土壤样品的汞污染水平进行评估,结果显示60%受到轻度污染,35%受到偏中度污染,5%受到中度污染。研究较为全面地分析了土壤汞污染的现状及浓度,为郑州市土壤汞污染防治提供参考。     

How does eliminating mercury from artisanal and small-scale gold mining lead to achieving sustainable development goals?

Artisanal and small-scale gold mining (ASGM) is the principal anthropogenic activity that globally contributes to overloading our environment with mercury. Although the Minamata Convention, led by the United Nations, is a crucial instrument to eliminate its use progressively, novel approaches to accelerate this difficult transition are welcome. This article proposes a framework for policy-making or improvement, fostering the enforcement of mercury elimination through the lens of the 17 Sustainable Development Goals (SDGs), focusing on the excluded artisanal and small-scale gold miners and their dependents. We move forward with a literature review of the Artisanal and Small Mining topic, taking each SDG as a unit of analysis. Understanding the problem as a puzzle of four sets of pieces, namely: (1) social, (2) environmental, (3) economic, and (4) institutional, the paper offers potential opportunities for the decision-makers and practitioners to accelerate the substitution of this heavy metal and develop sustainable futures for the ASGM communities. We conclude by proposing a pragmatic framework that synthesizes the means, actions, and ends to accelerate a sustainable transition.     

我国污染物总量控制制度改革的思考

污染物总量控制制度是我国环境保护制度的重要组成部分。结合污染物总量控制制度的实施现状,分析实施过程中减排基数、核算体系、责任主体等方面存在的问题。提出,改革现行污染物总量控制制度,将总量控制与改革中的排污许可制相融合,落实企业主体责任,将总量指标与环境质量改善挂钩,建立差异化的减排核算体系,并加强日常监管,达到改善环境质量的目标。     

Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

Total and methyl mercury in small marine biota caught off the Coast of Chennai,India

Abstract

This study reports the concentrations of total mercury and methyl mercury in sixteen families of marine biota caught off the coast of Kasimedu in Chennai, India, an important but understudied fish landing region. These included the commonly caught croakers, carangids, rays, goat fish, anchovies, crabs, and prawns. There was no correlation between total mercury or methyl mercury with fish length or mass. All concentrations were lower than the Food Safety and Standards Authority of India limits (total mercury = 500?μg/kg; methyl mercury = 250?μg/kg). Some values were above screening levels (total mercury >40?μg/kg wet weight) when considering possible adverse effects in predatory fish that consume the analyzed biota.

Abbreviations: dw: dry weight; MeHg: methyl mercury; THg: total mercury; ww: wet weight     

水中总氮测定方法存在问题的研究及改进

碱性过硫酸钾消解紫外分光光度法测定水中总氮采用的消解器皿是玻璃比色管,易造成空白偏高、结果偏低等问题。采用双圆柱状的消解杯对水样进行消解。结果表明,消解杯消解水中总氮,线性相关系数均大于0.999,检出限为0.05 mg/L,相对标准偏差小于5%,相对误差为0.88%~1.00%;改进后的消解器皿具有较好的精密度和准确度,能够更加准确测定水中总氮的含量。     

基于3S技术对太湖底质及水质总磷的研究

应用3S技术研究了太湖底质与水质总磷(TP)的分布情况,并结合水华频次分析了其相关性。结果表明:2016—2018年,太湖底质TP年均值在433~537 mg/kg波动,水质TP年均值从0.064 mg/L上升至0.087 mg/L。从空间分布来看,底质TP、水质TP和水华频次均呈现“西高东低”的规律,太湖西部区尤其是竺山湖区是需要开展治理的重点区域。3年间,太湖西部区水质TP上升,而底质TP与入湖河流TP下降,说明内源磷污染是太湖西部区水质TP升高的主要原因,须加强科学清淤。     

成渝高速铁路地面三向振动总值特性分析

为研究高速铁路地面三向振动总值特性,选择成渝高速铁路某路堤段和桥梁段进行了现场地面三向振动测试,分析了振动总值随距离的变化特性。结果表明,路堤段和高架桥段计权和未计权振动总值均随距离增加而近似呈负指数衰减,近场衰减快,远场衰减缓慢;路堤段和高架桥段计权振动总值与Z振级随距离的变化规律类似,且近场两者之间的差值较小,当评价高速铁路运营振动的环境影响时,近场可用Z振级近似代替计权振动总值。     

环渤海湿地芦苇对TC、TN、TP吸收通量的研究

主要调查研究环渤海湿地芦苇对TC、TN、TP的吸收通量。调查表明,2008年环渤海湿地的芦苇面积为20.08×104hm2。2009年,芦苇总生物量在7月、10月和11月的调查结果分别为267.2×104t、183.4×104t和138.0×104t。7月、10月和11月,芦苇对TC的吸收通量分别为115.58×104t、80.68×104t、64.23×104t;对TN的吸收通量分别为4.03×104t、1.45×104t、0.84×104t;对TP的吸收通量分别为0.37×104t、0.10×104t、0.031×104t。