Oil and power industries’ responses to EU emissions trading: laggards or low-carbon leaders?

ABSTRACT

How have petroleum and power companies and their European industry associations responded to the EU emissions trading system (ETS)? Responses can be political, directed externally towards the initiation and reforms of the EU ETS itself, or internally and market-based, directed at low-carbon solutions. Proactive response strategies shape companies’ leadership potential. Variation in responses is explained by two models that differ in assumptions about corporate behaviour as well as the wider multilevel regulatory context in which companies operate. Responses are found to have converged within the two industries, with reactive companies following the proactive ones. Secondly, responses between the two industries increasingly diverge, with the power industry becoming much more proactive than the petroleum industry. The main explanation is found in the differing relevance of the two models and the wider regulatory context, particularly differing exposure to international competition and weak international climate agreements.     

简述排污许可制下火电行业现状及发展

实施排污许可制度,是强化排污者责任、提高固定污染源环境管理效能、改善环境质量的重要制度保障。火电行业作为典型的高架固定源,先行试点实施排污许可制度。通过分析火电行业发展和环保现状,结合排污许可管理要点,简述排污许可制对火电行业发展的影响。     

二噁英类物质CALUX报告基因法在造纸行业的应用探究

选择典型造纸厂,采用化学激活报告基因法(CALUX)测定造纸过程中废水和纸浆中的二噁英类物质,并将部分样品测定结果与高分辨气相色谱-高分辨质谱(HRGC-HRMS)法测定结果作线性回归,换算系数为0.21,表明CALUX可用于造纸行业废水中二噁英类物质的快速筛查。将CALUX用于测定造纸厂废水中二噁英类物质,结果表明用含元素氯的漂白工艺会产生大量二噁英类物质,其中漂白废水中的目标物毒性当量浓度最高,经处理后可达到国家排放标准;而用无元素氯的漂白工艺,二噁英类物质的产生量会大幅降低。     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

组织支持感对建筑业农民工不安全行为的影响*

为对建筑业农民工的不安全行为进行科学有效的管理，探讨组织支持感、自我效能感与建筑业农民工不安全行为之间的关系，防止因建筑业农民工不安全行为造成的不安全事件发生，从组织行为学和计划行为学视角出发，以218名一线建筑业农民工为研究对象，通过构建结构方程模型进行实证分析。结果表明:组织支持感的3个维度均可直接对建筑业农民工的不安全行为产生负向显著影响，其中关心利益维度影响最大，工作支持维度次之；建筑业农民工的自我效能感在其组织支持感与不安全行为的负向关系中起到中介作用。     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.     

基于BERT-BILSTM-CRF模型的电力行业事故文本智能分析*

为解决电力行业事故报告文本较长、语义复杂,难以进行有效文本识别问题,提出1种以BERT作为底层的预训练模型,并设计1种双重注意力机制编码器,结合BILSTM-CRF深度挖掘事故文本语义特征,从而实现文本智能分析。首先构建电力词典,通过对BERT预训练,进行BIO标注,然后引入BILSTM-CRF模型实现对文本标签智能分类,最后将该模型与现行其他4种深度学习模型进行对比。研究结果表明:该模型智能识别精确率、召回率及F1值(查准率)均达到约97%,较其他4种模型中效果最好的模型分别提高0.02,0.03,0.02。研究结果可为电力行业事故报告文本分析提供1种新思路。     

多级过滤技术在汽车工业废水处理尾水回用中的应用

某大型汽车厂设计采用多级过滤技术对工业废水处理尾水进行深度处理,再生后的中水回用于工业循环冷却水系统。介绍了多级过滤工艺的系统组成、工艺原理及处理效果。实际运行情况表明:采用多级过滤技术处理汽车工业废水处理后的尾水,系统运行稳定,出水水质良好,满足GB/T 19923—2005《再生水用作冷却用水的水质控制标准》的要求。     

浅谈循环经济立法及再生资源产业化发展

论述了循环经济法制化发展的重要意义.以再生水为例,指出我国再生资源产业化发展潜力巨大,大力发展再生资源产业,对发展我国循环经济,建设循环型社会具有重要意义.