刍议多效蒸发处理含盐化工废水的进展

随着中国市场经济的发展,各种工业项目如雨后春笋般在中国各地兴起,随之而来的是给生态环境带来的巨大压力。化工项目一般都伴随着废水、废气、固废的产生。其中废水的排放尤其要引起重视,近年来国内很多研究人员都在研究含盐化工废水的回收利用。文中围绕多效蒸发处理含盐化工废水的技术工艺展开论述,对国内在多效蒸发技术方面的应用进展进行简要概述。     

不同类型活性炭处理废水中重金属离子的研究进展

重金属对人体的显著毒性和难降解的特性,使重金属水体污染成为全球性关注的环境问题。本文综述了重金属废水的危害、来源及常用处理方法,比较了不同类型活性炭处理废水中重金属离子的差异,阐述了不同类型活性炭处理技术的优势和特点,并对今后的重金属废水处理技术研究方向进行了展望。     

绿色化工环保技术与环境治理的关系

我国化工产业的不断发展,带动了我国经济的飞速发展,给人们的生活带来了许多便利条件,但是与此同时也对我国的环境造成了严重的破坏,化工生产用到许多化学材料,在生产过程中会产生大量的化学废弃物,对环境的污染造成很严重的影响。我国对化工生产给环境保护造成的影响高度重视,随着绿色化工环保技术的出现,有效解决了化工产业造成的环境污染问题,对我国的环境问题进行了有效的改善,对我国工业的发展具有重要意义。本文针对绿色化工环保技术进行分析,探讨绿色化工环保技术在环境治理中的有效应用。     

Inherent thermal runaway hazard evaluation method of chemical process based on fire and explosion index

Thermal runaway hazard assessment provides the basis for comparing the hazard levels of different chemical processes. To make an overall evaluation, hazard of materials and reactions should be considered. However, most existing methods didn't take the both into account simultaneously, which may lead the assessment to a deviation from the actual hazard. Therefore, an integrated approach called Inherent Thermal-runaway Hazard Index (ITHI) was developed in this paper. Similar to Dow Fire and Explosion Index(F&EI) function, thermal runaway hazard of chemical process in ITHI was the product of material factor (MF) and risk index (RI) of reaction. MF was an indicator of material thermal hazards, which can be determined by initial reaction temperature and maximum power density. RI, which was the product of probability and severity, indicated the risk of thermal runaway during the reaction stage. Time to maximum rate under adiabatic conditions and criticality classes of scenario were used to indicate the runaway probability of the chemical process. Adiabatic temperature rise and heat of the desired reaction and secondary reaction were used to determine the severity of runaway reaction. Finally, predefined hazard classification criteria was used to classify and interpret the results obtained by this method. Moreover, the method was validated by case studies.     

南京市农用地土壤中重金属形态特征分析

以南京市农用地土壤为研究对象,采用顺序提取的方法对Cu、Zn、Pb、Cd做化学形态分析,了解不同元素各形态下空间赋存的含量与占比。结果表明,在农用地土壤中,上述4种金属元素所赋存的化学形态活泼性顺序为CdPbCuZn,其中Cd主要为醋酸提取态,Pb主要为可还原态,各占总量的40%以上,具有较高的生物有效性和潜在危害性;Cu与Zn主要为残渣态,占总量的60%左右,生物可利用性较低。由因子分析法可知,土壤p H值越大,Zn与Cd就越趋于向稳定的化学形态转化,土壤有机质含量越高,对Cu与Pb的络合能力就越强,可以降低其环境危害性。     

废水中甲基橙的电化学降解

以FTO导电玻璃作为阳极、石墨电极作为阴极电解模拟甲基橙废水,优化了工艺条件,并对甲基橙的降解机理进行了初步探究。实验结果表明,在NaCl投加量5 g/L、电压8 V、废水pH 6、初始甲基橙质量浓度6.0 mg/L的优化条件下电解30 min,废水的脱色率达91.3%,COD降低了62%。机理研究结果表明,电解产生的羟基自由基与甲基橙发生氧化还原反应,破坏了甲基橙的显色基团,使其内部某些化学键发生断裂,从而达到脱色的目的。     

Preliminary studies on potential remediation of acid mine drainage‐impacted soils by amendment with drinking‐water treatment residuals

Mining operations result in a wide range of environmental impacts: acid mine drainage (AMD) and acid sulfate soils being among the most common. Due to their acidic pH and high soluble metal concentrations, both AMD and acid sulfate soils can severely damage the local ecosystems. Proper post‐mining management practices are necessary to control AMD‐related environmental issues. Current AMD‐impacted soil treatment technologies are rather expensive and typically not environmentally sustainable. We conducted a 60‐day bench‐scale study to evaluate the potential of a cost‐effective and environment‐friendly technology in treating AMD‐impacted soils. The metal binding and acid‐neutralizing capacity of an industrial by‐product, drinking water treatment residuals (WTRs) were used for AMD remediation. Two types of locally generated WTRs, an aluminum‐based WTR (Al‐WTR) and a lime‐based WTR (Ca‐WTR) were used. Highly acidic AMD‐impacted soil containing very high concentrations of metals and metalloids, such as iron, nickel, and arsenic, was collected from the Tab‐Simco coal mine in Carbondale, Illinois. Soil amendment using a 1:1 Al‐ and Ca‐WTR mix, applied at 5 and 10 percent rates significantly lowered the soluble and exchangeable fractions of metals in the AMD‐impacted soil, thus lowering potential metal toxicity. Soil pH increased from an extremely acidic 2.69 to a near‐neutral 6.86 standard units over the 60‐day study period. Results from this preliminary study suggest the possibility of a successful scale‐up of this innovative, cost‐effective, and environmentally sustainable technology for remediating AMD‐impacted acid sulfate soils.     

System dynamics research of non-adaptive evacuation psychology in toxic gas leakage emergencies of chemical park

Chemical industry park plays an important role in optimizing the allocation of resources, but an emergency may make a great deal of personnel casualty and property loss. Many casualties are not the result of accidents but are caused by extreme behavior because of the non-adaptive psychology of the evacuees. Panic is one of the non-adaptive psychological behaviors during an evacuation, which is influenced by a variety of factors. Based on the consideration of the disaster environment and the evolution of crowd emotion, a system dynamics model of panic spread is established by using Anylogic software, and simulation experiments are carried out for different disaster severity, visibility, and groups. The results show that the number of people with severe panic increase when visibility decreases or disaster diffuses. Besides, the appropriate proportion of groups can effectively reduce the cooling time of crowd and ease the fears. However, continue to increase the number of groups has no significant effect on the panic control. This work can provide some reasonable guidance for regional emergency evacuation in chemical park.     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

Ti3C2纳米层状材料对废水中Cr（Ⅵ）的光催化去除性能

以Ti₃AlC₂为原料,采用HF刻蚀工艺制备出12种Ti₃C₂纳米层状材料,对其形貌进行了表征,并考察了以其作为光催化剂对废水中Cr（Ⅵ）的处理效果。实验结果表明：HF体积分数为80%、刻蚀时间为48 h时得到的MX-80-48的形貌较好;MX-80-48具有类似石墨烯的二维层状结构,纳米层厚度约20~50 nm,孔径2~10 nm,比表面积14.8 m²/g,在400~700 nm可见光范围内表现出强烈的吸光性;当Cr（Ⅵ）的初始质量浓度为40.00 mg/L、MX-80-48投加量为200 mg/L、pH=2、反应时间4 h（暗反应1 h+光照3 h）时,Cr（Ⅵ）去除率可达100%。