光离子化检测器便携式气相色谱仪快速测定空气中苯系物

本文研究了使用光离子化检测器便携式气相色谱仪，直接测定空气中ｍｇ／ｍ３级苯系物（苯、甲苯、乙苯、邻、间、对位的二甲苯及异丙苯）的快速分析方法。方法的线性范围为０～１００ｍｇ／ｍ３，相关系数均在０．９９９以上，方法的变异系数分别为２．９～１２．５％（５ｍｇ／ｍ３），３．４～７．９％（３０ｍｇ／ｍ３），方法最低检测限达０．２～１．０ｍｇ／ｍ３。     

Simultaneous determination of dissolved organic nitrogen, nitrite, nitrate and ammonia using size exclusion chromatography coupled with nitrogen detector

Accurate quantification of dissolved organic nitrogen (DON) has been a challenge due to the cumulative analytical errors in the conventional method via subtracting dissolved inorganic nitrogen species (DIN) from total dissolved nitrogen (TDN). Size exclusion chromatography coupled with an organic nitrogen detector (SEC-OND) has been developed as a direct method for quantification and characterization of DON. However, the applications of SEC-OND method still subject to poor separations between DON and DIN species and unsatisfied N recoveries of macromolecules. In this study, we packed a series of SEC columns with different lengths and resin materials for separation of different N species and designed an independent vacuum ultraviolet (VUV) oxidation device for complete oxidation converting N species to nitrate. To guarantee sufficient N recoveries, the operation conditions were optimized as oxidation time ≥ 30 min, injection mass (sample concentration × injection volume) < 1000 µL × mg-N/L for macromolecular proteins, and neutral pH mobile eluent. The dissolved O₂ concentration in SEC mobile phase determined the upper limit of VUV oxidation at a specific oxidation time. Compared to conventional HW50S column (20 × 250 mm), HW40S column (20 × 350 mm) with mobile phase comprising of 1.5 g/L Na₂HPO₄·2H₂O + 2.5 g/L KH₂PO₄ (pH = 6.85) could achieve a better separation of DON, nitrite, nitrate, and ammonia. When applied to river water, lake water, wastewater effluent, groundwater, and landfill leachate, the SEC-OND method could quantify DON as well as DIN species accurately and conveniently even the DIN/TDN ratio reached 0.98.     

海面溢油的荧光光谱鉴别法述评

介绍了荧光光谱技术在鉴别海面溢油中的应用和进展。根据荧光光谱的三维特性 ,分别阐述了普通荧光光谱、同步荧光扫描光谱、可变角同步扫描光谱、三维荧光光谱等不同荧光光谱的“指纹”信息特征 ,并介绍了导数荧光法、低温荧光法、磷光光谱法等辅助鉴别方法     

大气中苯乙烯的气相色谱法测定

采用活性炭管吸附大气中基苯乙烯，以二硫化碳洗脱，以溴水加成后，用气相色谱电子捕获器测定苯乙烯的二溴加成物。本方法适合于检测多种污染物共存的大气中痕量苯乙烯。其线性范围为０．０１５－０．７４ｎｇ，最低检出浓度为０．００１ｍｇ／ｍ＾３；重现性实验的变异系数为２．３％：当活性炭管吸附苯乙烯在２．９μｇ时，回收率为９０％，吸附苯乙烯０．２９μｇ时，回收率为７２％。     

饮用水中五种有机磷农药的快速检测法

本文介绍了使用Ｗａｔｅｒｓ ＯＡＳＩＳ－ＨＬＢ固相萃取小柱从水中分离富集敌百虫、敌敌畏、乐果、甲基对硫磷，对硫磷五种有机磷农药的快速检测法。     

Direct hydride derivatization of methyl- and ethylmercury chlorides in aqueous solution with KBH4

A convenient hydride derivatization procedure of methyl-and ethylmercury chlorides to volatile hydrides was reported. In sealed vials methylmercury and ethylmercury compounds in acidic aqueous solutions were converted into their volatile forms by the reaction with potassium tetrahydroborate(KBH4) and elvolved to the headspace of the vials. The gaseous analytes in the headspace were extracted and concentrated by solid phase microextraction(SPME) and injected into gas chromatography (GC) for separation and identified by mass selective detector(MS).     

地质样品中27项元素的粉末压片法x射线荧光光谱测定

本文报导了用x射线荧光光谱法—次粉末压片制样同时测定Na. Mg. Al. Si.P. S. K. Ca. Ti. V. Cr. Mn. Fe. Co. Ni. Cu. Zn. Rb. Sr. Y. Zr. Nb. Ba. Hf. Pb. Th. U等27项元素的快速分析方法。从理论上提出了新的基体效应学校正模式,首次引入了非荧光分析的物质(筒称NFAM)的新概念;并计算了理论α系数,使理论α系数在粉末压片法x射线荧光分析中获得了应用。本方法测定的对象可以是岩石,土壤和水系沉积物等地质样品。     

光离子化检测器便携式气相色谱仪快速测定水中苯系物

本文研究了使用光离子化检测器便携式气相色谱仪，在环境温度下手工摇荡的快速顶空法测定水中苯系物（苯、甲苯、乙苯、邻、间、对位的二甲苯及异丙苯）的分析方法。方法的线性范围为０～１８０μｇ／Ｌ，相关系数均在０．９９６以上，方法的变异系数分别为１．０～１４％（１０μｇ／Ｌ），２．９～７．８％（３０μｇ／Ｌ），方法的最低检测限达０．５～１．５μｇ／Ｌ。     

City hazardous gas monitoring network

In our today's societies, many dangerous chemicals are produced and transported. Due to the vast use of chemicals, more chemical accidents are taking place with huge losses. In this study a city hazardous gas monitoring network was designed to detect the dispersion of toxic and combustible gases in the primary stages. The network could cover hazardous chemical facilities, important hazardous chemical routes, warehouses and special locations which may be the targets of terrorist attacks. The network is consisted of several local networks and a central control panel complex. Each local network has a local control panel in the center and many detectors and sounders around it at distances less than 3000 m that communicate with the local control panels wirelessly. In each location there are two types of gas detectors, toxic and combustible, and a sounder which are equipped with a wireless, radio frequency modem allowing the units to communicate readings and other information on a real-time basis with a remotely located local control panel. High sensitive Photo Ionization Detectors, PIDs, are used to provide fast and low-level on-site screening for chemicals contamination. Combustible gas detectors are the second choice to sense the combustible gas and verify the readings of PIDs in this regard. The central panel consists of several connected control panels work uniquely helping a computer set and the appropriate software and communicate with local control panels via telephone lines. All of the network components are shown on the monitor of central panel with special symbols by geographical information system program. The system is fully addressable so that the high level detection of a detector produces a blinking color double-circle around its symbol in GIS plan. In case of high level gas detection, a team of experts who are fully equipped with different portable detectors depart to the site to test the field to identify the chemicals. All readings of detectors are saved in a data bank and then analyzed to find any chemicals spills and leakages. The network was simulated by a special program so that the components of local networks and the central panel are shown in separate windows. By clicking on one detector on environmental window the formerly designed responses will be activated in central panel window.     

Research based on double coverage rate and reliability of gas detector layout optimization

The gas detector layout should be highly attuned to combustible gas leakage and attain a good reliability in avoiding detector malfunction, which is an important guarantee for the normal production of the chemical industry and other related enterprises. Herein, a gas detector layout optimization method based on double coverage and reliability is proposed. The key gas leakage monitoring area is determined through layout scene field investigation. To improve the detection probability and detection system reliability, the dual coverage target and voting mechanism are set, and the gas detector layout is determined with the ray-casting algorithm according to the coverage target. Combined with FLACS software to simulate a variety of typical leakage conditions under different layout scenarios, the relationship between the leaked gas concentration detected by gas detectors in each layout scheme and time is obtained, and the gas leakage detection probability in each layout scheme, number of detectors that can trigger the alarm, shortest time to trigger the alarm and reliability are comprehensively evaluated. The decision-maker selects the final gas detector layout plan according to the evaluation results and actual site needs. The study shows that the detection probability of each layout scheme set according to the double coverage is high, and multiple detectors can trigger the alarm (up to 100%), which ensures that the alarm can be triggered within 10 s under all applicable conditions. According to the evaluation results, the decision-maker can obtain a layout scheme that not only agrees with the actual site conditions but also attains a high detection probability, short detection time and strong reliability.