A new leak location method based on leakage acoustic waves for oil and gas pipelines

In order to study a new leak detection and location method for oil and natural gas pipelines based on acoustic waves, the propagation model is established and modified. Firstly, the propagation law in theory is obtained by analyzing the damping impact factors which cause the attenuation. Then, the dominant-energy frequency bands of leakage acoustic waves are obtained through experiments by wavelet transform analysis. Thirdly, the actual propagation model is modified by the correction factor based on the dominant-energy frequency bands. Then a new leak detection and location method is proposed based on the propagation law which is validated by the experiments for oil pipelines. Finally, the conclusions and the method are applied to the gas pipelines in experiments. The results indicate: the modified propagation model can be established by the experimental method; the new leak location method is effective and can be applied to both oil and gas pipelines and it has advantages over the traditional location method based on the velocity and the time difference. Conclusions can be drawn that the new leak detection and location method can effectively and accurately detect and locate the leakages in oil and natural gas pipelines.     

Immersion frying for the thermal drying of sewage sludge: an economic assessment

This paper presents an economic study of a novel thermal fry-drying technology which transforms sewage sludge and recycled cooking oil (RCO) into a solid fuel. The process is shown to have significant potential advantage in terms of capital costs (by factors of several times) and comparable operating costs. Three potential variants of the process have been simulated and costed in terms of both capital and operating requirements for a commercial scale of operation. The differences are in the energy recovery systems, which include a simple condensation of the evaporated water and two different heat pump configurations. Simple condensation provides the simplest process, but the energy efficiency gain of an open heat pump offset this, making it economically somewhat more attractive. In terms of operating costs, current sludge dryers are dominated by maintenance and energy requirements, while for fry-drying these are comparatively small. Fry-drying running costs are dominated by provision of makeup waste oil. Cost reduction could focus on cheaper waste oil, e.g. from grease trap waste.     

1000t/d含油废水旋流分离技术及设备研究

将实验室研制的 HL 型旋流器用压力容器式方式并联起来 ,建立 10 0 0 t/ d规模的示范装置 ,并进行试验。示范装置的试验结果表明 ,与工业测试比较 ,HL型旋流器并没有因为规模的放大而造成性能下降 ,它能取代石化行业目前采用的“一隔二浮”流程中的大部分装置 ,具有明显的经济效益和广阔的应用前景     

河南双河油泥在生物降解过程中饱和烃污染物的组成与分布

分析了河南双河油泥在微生物降解过程中烷烃的组成与分布特征,结果表明,XT-4、F-2、C-2、A-1和AB-1菌的混合菌对饱和烃组分有好的降解效果:当饱和烃含量在60~70g/kg范围时,经过120d的降解,饱和烃降解率达到66.4%,随着降解的进行,正构烷烃分布由单峰形变成了双峰形;萜烷类抗微生物降解能力强,在本实验条件下,其组成与分布没有发生显著变化。微生物对烷烃类化合物易降解顺序为:正构烷烃>类异戊二烯烃>藿烷类,C21以前的正构烷烃>C22以后的正构烷烃,姥鲛烷>植烷,Tm>Ts,藿烷>莫烷。     

油团聚法处理炭黑废水的研究

根据炭黑疏水性的特点 ,本试验采用油团聚工艺成功地处理了炭黑废水。经处理后 ,出水中炭黑含量小于 5.0 mg/ L,出水可回用 ,回收的炭黑用四氯化碳处理后 ,经过滤干燥可得到含水率小于 1 .0 %的炭黑 ,油相可回用。     

红外法测定石油类项目中标准曲线的简化绘制

目前GB/T164 88-1996以红外分光光度法这测定石油类的有一种方法。该法用四氯代碳作莘取剂 ,四氯化碳用量大。四氯化碳是一种有毒、挥发性较强的有机溶剂。在监测该项目时 ,绘制标准曲线所用的标准储备液的配制相当复杂且形成的系统误差比较大 ,为减少误差并准确地绘制标准曲线 ,本文采取了简化配制步骤的方法来绘制曲线 ,并达到了与JDS -10 0型红外分光测油仪使用说明书中提供的方法一致的效果。     

物化法处理炼油废水

阐述了加热隔油与两级气浮相串联的物化法处理高粘度炼油废水的试验原理、过程及注意事项。结果表明：该试验流程处理效率高、四季运行稳定、出水能够达标排放。同时可回收浮油和泡沫油，具有显著的经济效益。     

台湾海峡溢油应急反应合作初探

分析了日益繁忙的台湾海峡这一黄金水道潜在的大规模突发性溢油风险，指出了建立台湾海峡溢油应急计划的迫切性，并提出该计划的框架思路，呼呈两携手合作共同抗御海峡溢油。     

生物氧化塔的应用

介绍了生物氧化培处理含油污水的装置运行情况．大量数据说明该塔具有操作弹性大，适用范围广，能耗低，脱除率高，不外排过剩的活性污泥等特点，具有广阔的推广应用前景。     

石油化工厂区土壤中总石油烃分布的研究

为了进行石油化工厂区地下环境的现场评估，利用气相色谱法（EPA8015B）对其土壤中总石油烃（TPHs)进行了测定，测定结果以柴油范围的有机物（DRO）和润滑油范围的有机物（ORO）表示。结果表明：土壤各层DRO检出率在58％－72％之间，ORO检出率在82％－89％之间，大多数检出点位的DRO、ORO含量小于500mg/kg；个别点位的DRO、ORO高达30000mg/kg。