Fungicidal values of bio-oils and their lignin-rich fractions obtained from wood/bark fast pyrolysis

Pine wood, pine bark, oak wood and oak bark were pyrolyzed in an auger reactor. A total of 16 bio-oils or pyrolytic oils were generated at different temperatures and residence times. Two additional pine bio-oils were produced at the National Renewable Energy Laboratory in a fluidized-bed reactor at different temperatures. All these bio-oils were fractionated to obtain lignin-rich fractions which consist mainly of phenols and neutrals. The pyrolytic lignin-rich fractions were obtained by liquid-liquid extraction. Whole bio-oils and their lignin-rich fractions were studied as potential environmentally benign wood preservatives to replace metal-based CCA and copper systems that have raised environmental concerns. Each bio-oil and several lignin-rich fractions were tested for antifungal properties. Soil block tests were conducted using one brown-rot fungus (Gloeophyllum trabeum) and one white-rot fungus (Trametes versicolor). The lignin-rich fractions showed greater fungal inhibition than whole bio-oils for a impregnation solution 10% concentration level. Water repellence tests were also performed to study wood wafer swelling behavior before and after bio-oil and lignin-rich fraction treatments. In this case, bio-oil fractions did not exhibit higher water repellency than whole bio-oils. Comparison of raw bio-oils in soil block tests, with unleached wafers, at 10% and 25% bio-oil impregnation solution concentration levels showed excellent wood preservation properties at the 25% level. The good performance of raw bio-oils at higher loading levels suggests that fractionation to generate lignin-rich fractions is unnecessary. At this more effective 25% loading level in general, the raw bio-oils performed similarly. Prevention of leaching is critically important for both raw bio-oils and their fractions to provide decay resistance. Initial tests of a polymerization chemical to prevent leaching showed some success.     

Development of a diffusive sampling method for determination of methyl isocyanate in air

A diffusive sampling method for determination of methyl isocyanate in air has been developed. A glass fibre filter impregnated with 1-(2-methoxyphenyl)piperazine in a commercially available diffusive sampling device was used to collect methyl isocyanate and the derivative formed was analysed with LC-MS/MS. The sampling rate was determined to be 15.6 ml min(-1), with a relative standard deviation of 7.3%. The sampler was validated for sampling periods from 15 min to 8 h, for relative humidities from 20% to 80% and for concentrations from I to 46 microg m(-3). A field validation was also made and the diffusive sampling results showed no difference compared to a pumped reference method. The impregnated filters have to be stored apart from the diffusive sampler housing and loaded into the sampler prior to each sampling.     

Equity-focused health impact assessment: A tool to assist policy makers in addressing health inequalities

In Australasia (Australia and New Zealand) the use of health impact assessment (HIA) as a tool for improved policy development is comparatively new. The public health workforce do not routinely assess the potential health and equity impacts of proposed policies or programs. The Australasian Collaboration for Health Equity Impact Assessment was funded to develop a strategic framework for equity-focused HIA (EFHIA) with the intent of strengthening the ways in which equity is addressed in each step of HIA. The collaboration developed a draft framework for EFHIA that mirrored, but modified the commonly accepted steps of HIA; tested the draft framework in six different health service delivery settings; analysed the feedback about application of the draft EFHIA framework and modified it accordingly. The strategic framework shows promise in providing a systematic process for identifying potential differential health impacts and assessing the extent to which these are avoidable and unfair. This paper presents the EFHIA framework and discusses some of the issues that arose in the case study sites undertaking equity-focused HIA.     

Evaluation of two adsorbents for diffusive sampling and thermal desorption-gas chromatographic analysis of monoterpenes in air

Tube type samplers with two different adsorbents, Chromosorb 106 and Tenax TA, were evaluated by laboratory experiments and field tests for simultaneous diffusive sampling of alpha-pinene, beta-pinene and delta 3-carene and subsequent thermal desorption-gas chromatographic analysis. No statistically significant effects of exposure time, concentrations of monoterpenes or relative humidity were found for samplers with Chromosorb 106 when running a factorial design, with the exception of the adsorption of delta 3-carene, for which some weak effects were noted. Samplers with Tenax TA were affected by the sampling time as well as the concentration for all terpenes, with a strong interaction effect between these two factors. The terpenes showed good storage stability on both adsorbents. No effect of back-diffusion was noted when using Chromosorb 106, while Tenax TA showed some back-diffusion effects. The uptake rates, in ml min-1, for the terpenes on Chromosorb 106 were 0.36 for alpha-pinene, 0.36 for beta-pinene and 0.40 for delta 3-carene. The corresponding average values on Tenax TA were 0.30 for alpha-pinene, 0.32 for beta-pinene and 0.38 for delta 3-carene. The field validation proved that diffusive sampling on Chromosorb 106 agreed well with pumped sampling on charcoal for stationary samples, while the personal samples indicated a discrepancy of 25% between Chromosorb 106 and charcoal samples. Tenax TA generally gave lower results than Chromosorb 106 in all field samples. Samplers packed with Chromosorb 106 could be used to monitor terpene levels in workplaces such as sawmills. The major advantages with this method are the sampling procedure, which is simple to perform compared to other techniques, the easily automated analysis procedure and the possibility to reuse the samplers.     

麦夸里岛毛皮海豹体内小塑料颗粒的来源和生物聚集

本文研究了从麦夸里岛上毛皮海豹(Arctocephalus spp.)粪便中发现的164个塑料颗粒(平均长度为4.1mm).其中41个塑料颗粒的电子显微照片显示,从其形状来看,没有一个可被确定为塑料颗柱原料--通常这样的颗粒是圆柱形和球形的.而海豹粪便中的164个塑料颗粒全都是7种颜色的角形颗粒(原料颗粒通常是透明的或白色的),并可被分为两类①沿晶体线碎裂的和可能是紫外线分解的;②被磨蚀成带有圆角的不规则形状(擦痕明显可见).白色、棕色、绿色、黄色以及蓝色是最常见的颜色.在成分上,它们来自于5种聚合物群聚乙烯93%;聚丙烯4%;多(1-CI-1-聚丁二烯)聚氯丁二烯2%;三聚氰胺-尿素(酚)(甲醛)树脂0.5%以及纤维素(绳纤维)0.5%.较大的群是漂浮的,比重小于海水.这些小塑料是由较大颗粒(碎片)分解而成的.它们看来是被水冲上岸的并在卵石海滩上受到研磨的塑料用品分解而成的.大多数颗粒(70%)肯定是由于经过不断的磨蚀而最后形成今天的形状.据假设,塑料颗粒被冲到海洋中,然后按其大小有选择地被一种中上层鱼--Electrona subaspera--吃掉,而这种鱼后来又被毛皮海豹吃掉.因此,这些塑料颗粒是由这种鱼和海豹在其正常的摄食过程中聚集的.     

博茨瓦纳欧科范果湿地1972～2000年泛滥方式

欧科范果三角洲地区泛滥范围年年在变化.这种变化与安哥拉高地集水区的区域性降水及当地降雨量有关.我们采用了1972～2000年的3000多幅卫星图像来描绘湿地的格局,其中从1985～2000年的图像几乎是NOAAAVHRR每日连续传送的,1972年以来的其它图像是从Landsat传感器上传下来的,其连续性次之.对AVHRR图像每10天为一期,用无监督分类方法分成陆地和水体.对LandsatTM和ERS2-ATSR数据进行分析的结果,与测算的淹没区域89%相吻合.结果显示欧科范果湿地近期30年期间的变化约在2450～11400km2之间.     

The effect of the introduction of prenatal diagnosis on the reproductive history of women at increased risk from neural tube defects

The reproductive history of 45 couples at increased risk for neural tube defect (NTD) who came for genetic counselling in 1970 and 1971 were compared with a similar number counselled in 1975 and 1976, when prenatal diagnostic tests were freely offered. They were subsequently interviewed in their homes and had their reproductive history recorded to the end of 1973 and 1978 respectively. Nearly all had a previous child with an NTD and none of the women were pregnant at the time of counselling. The effect of prenatal diagnosis was to speed somewhat the decision about further pregnancies, but the number of couples deciding on no further children and on having further pregnancies were almost identical in the two groups. The average number of pregnancies was 2·8 per family, with only 1·2 surviving children. The pregnancy outcomes are discussed as are the reasons for not attempting further pregnancies in both groups, which included very high risk of recurrence, a surviving spina bifida child, inability to accept the tests or its implications. Ninety per cent of the second group had tests. Their reactions to the tests were favourable but all complained of the waiting time between amniocentesis and obtaining the results. They all would have tests again in any future pregnancy. The reason for women not having prenatal diagnostic tests included inability to accept termination. It is concluded that couples in South Wales decide either to have no more children or to have further pregnancies regardless of tests. but tests speed a decision and enable the women to enjoy the pregnancy after obtaining the results, and that an NTD greatly reduces the number of children per family. A termination for an NTD is much more acceptable to most than an NTD at term. The reasons for this are discussed.     

Effects of planned expansion of waste incineration in the Swedish district heating systems

Recent targets for reduced amounts of waste to landfills in Sweden will result in a large increase in waste incineration with recovery of energy, used primarily for district heating. The aim of this study is to investigate what changes in the usage of other fuels and technologies for district heat production would be caused by this increase. A questionnaire was sent out to the largest district heating companies, and simulations in an energy systems model were carried out. The analysis shows that increased waste incineration reduces the demand for other fuels, especially biomass, for district heat production. The effects include reductions in operating hours as well as the avoidance or postponement of investments in new plants for district heat production. Increased waste incineration will also lead to a greater use of district heating in Sweden.