Environmental 238U and 232Th concentration measurements in an area of high level natural background radiation at Palong, Johor, Malaysia

Concentrations of uranium-238 and thorium-232 in soil, water, grass, moss and oil-palm fruit samples collected from an area of high background radiation were determined using neutron activation analysis (NAA). U-238 concentration in soil ranged from 4.9 mg kg(-1) (58.8 Bq kg(-1)) to 40.4 mg kg(-1) (484.8 Bq kg(-1)), Th-232 concentration ranged from 14.9 mg kg(-1) (59.6 Bq kg(-1)) to 301.0 mg kg(-1) (1204 Bq kg(-1)). The concentration of U-238 in grass samples ranged from below the detection limit to 0.076 mg kg(-1) (912 mBq kg(-1)), and Th-232 ranged from 0.008 mg kg(-1) (32 mBq kg(-1)) to 0.343 mg kg(-1) (1.372 Bq kg(-1)). U-238 content in water samples ranged from 0.33 mg kg(-1) (4.0 Bq L(-1)) to 1.40 mg kg(-1) (16.8 Bq L(-1)), and Th-232 ranged from 0.19 mg kg(-1) (0.76 Bq L(-1)) to 0.66 mg kg(-1) (2.64 Bq L(-1)). It can be said that the concentrations of environmental U-238 and Th-232 in grass and water samples in the study area are insignificant. Mosses were found to be possible bio-radiological indicators due to their high absorption of the heavy radioelements from the environment.     

Initiating automotive component reuse in Malaysia

As the production of local vehicles increases, the impact of end-of-life vehicles (ELVs) wastes to the environment will also increase. ELVs recovery including reuse, remanufacture, and recycle apparently become a strategy in solving this environmental problem. This study identifies the existing conditions of automotive reuse in Malaysia by conducting some interviews in selected local automotive and automotive component manufacturers. Results from the interviews indicated that reuse of automotive components in newly manufactured vehicles has never been practiced by the selected companies. However, there is interest among respondents in developing automotive components for after-market reuse. Some strategies were proposed in this study to initiate automotive components reuse in the local automotive manufacturers including the establishment of the end-of-life directive, enhance research and development on design for reuse and increase reusability and economic benefits of reuse.     

Biohythane production from pineapple peel using Methanosarcina mazei enhanced with palm oil mill effluent (POME) sludge in single-stage anaerobic digestion

Biohythane production via single-stage anaerobic digestion (AD) is an effective way for sustainable energy recovery from lignocellulosic biomass. In this paper, biohythane was produced through the AD process from pineapple peel waste substrate using purely cultured Methanosarcina mazei with the enhancement of palm oil mill effluent (POME) sludge as the inoculum. This study focuses on the effects of the lignocellulosic pre-treatment method, the addition of POME sludge into M. mazei culture medium as inoculum, and various operational conditions (food to microorganisms (F/M) ratios, temperature, pH) on gas production performances. The experimental results indicate that these parameters influenced the efficiency of biohythane production by producing the peak maximum biohythane production rate values (HPR_max) and (MPR_max), H₂:CH₄ = 1.93:0.67 L/L-d, and biohythane yield (HY) and (MY), H₂:CH₄ = 1.18:0.55 mL/L-substrate. This study demonstrates that biohythane gas (H₂ + CH₄ + CO₂) production from pineapple waste can be accelerated by M. mazei only with the enhancement of POME sludge through single-stage AD system under mesophilic batch process conditions.     

Probabilistic risk assessment and risk mapping of metals in tropical estuarine sediments using the 1 quarisk model

Total sediment concentrations of Cd, Cu, Pb, Zn, As, and Hg obtained from the Ankobra, Sakumo II, and Volta estuaries in Ghana were used to generate contaminant probability density distributions and species sensitivity distributions in AQUARISK. Results of the tier 1 assessment showed Cu, Cd, Zn, and Pb were not of concern in the Ankobra as their measured values and the 99th percentile of the fitted distributions were lower than the SQG low-trigger values. Mercury (Hg) and As were however, identified to be of concern in this estuary. In the Sakumo II estuary, Cu, Cd, Pb, and Hg have been identified to be of concern because their concentrations are higher than the SQG low-trigger values. Hg has been identified as the only metal of concern in the Volta estuary. The total proportion of species likely to be affected by the combined concentration of Cd, Cu, and Zn measured from Ankobra, Sakumo II, and Volta were 14%, 16%, and 12%, respectively, according to the Bur III distributional analysis of the ecotoxicology data. The measured median sediment concentrations of As and Hg in the Ankobra estuary greatly exceeded the median sediment concentration targets to achieve a 5% or less exceedence of the SQG low value. Similarly, in the Sakumo II estuary, the measured median sediment concentrations of Cu, Pb, and Hg greatly exceeded the median sediment concentration targets to achieve a 5% or less exceedence of the SQG low. For the Volta estuary however, other metals except Hg fall below the target values.     

A multinomial logit analysis of factors associated with severity of motorcycle crashes in Ghana

Objective: The objective of this study was to explore the factors affecting motorcycle crash severity in Ghana.

Methods: A retrospective analysis of motorcycle crash data between 2011 and 2015 was conducted using a motorcycle crash data set extracted from the National Road Traffic Crash Database at the Building and Road Research Institute (BRRI) in Ghana. Injury severity was classified into 4 categories: Fatal, hospitalized, injured, and damage only. A multinomial logit modeling framework was used to identify the possible determinants of motorcycle crash severity.

Results: During the study period, a total of 8,516 motorcycle crashes were recorded, of which 22.9% were classified as fatal, 42.1% were classified as hospitalized injuries, 29.4% were classified as slight injuries, and 5.6% were classified as damage-only crashes. The estimation results indicate that the following factors increase the probability of fatal injuries: At a junction; weekend; signage; poor road shoulder; village settlement; tarred and good road surface; and collision between motorcycle and heavy goods vehicle (HGV). Motorcycle crashes occurring during the daytime and on the weekend increases the probability of hospitalized injury. The results also suggest that motorcycle crashes occurring during the daytime, in curves or inclined portions of roads, or in unclear weather conditions decrease the probability of fatal injury.

Conclusions: This study provides further empirical evidence to support motorcycle crash modeling research, which is lacking in developing countries. The ability to understand the various factors that influence motorcycle crash severity is a step forward in providing an appropriate basis upon which informed motorcycle crash policies can be developed. Particular attention should be given to the provision of road signage at junctions and speed humps and controlling traffic during the weekend. In addition, road maintenance should be carried out periodically to address motorcycle safety in Ghana.     

Application of malt residue in submerged fermentation of Bacillus subtilis

Malt residue is a common waste or byproduct from beer industries after brewing and milling of malted barley. In this work, Bacillus subtilis RB14 was used to study the microbial growth and production of secondary metabolites like lipopeptide antibiotic iturin A in the malt residue for its effective recycling. B. subtilis RB14 could grow in submerged fermentation of malt residue and significant growth (10⁹ CFU/mL) was observed without any supplementation. In submerged fermentation iturin A production using malt residue was about 170 mg/L, which was found to be higher than its production in No.3 (Polypepton, glucose, KH₂PO₄, MgSO₄·7H₂O) medium where production was about 120 mg/L. More than 600 mg/L of iturin A production was observed when malt residue was combinedly used with No.3 medium. This production was significantly higher than their summation of their individual production. However, the growth of B. subtilis in combined medium was found to be similar to that of the submerged fermentation in simple malt residue. Therefore, the remarkable enhancement in production of iturin A in supplemented malt residue was attributed to the nutrients supplied from No.3 medium.     

Pollution control technologies for the treatment of palm oil mill effluent (POME) through end-of-pipe processes

Palm oil production is one of the major industries in Malaysia and this country ranks one of the largest productions in the world. In Malaysia, the total production of crude palm oil in 2008 was 17,734,441 tonnes. However, the production of this amount of crude palm oil results in even larger amounts of palm oil mill effluent (POME). In the year 2008 alone, at least 44 million tonnes of POME was generated in Malaysia. Currently, the ponding system is the most common treatment method for POME but other processes such as aerobic and anaerobic digestion, physicochemical treatment and membrane filtration may also provide the palm oil industries with possible insights into the improvement of POME treatment processes. Generally, open ponding offers low capital and operating costs but this conventional method is becoming less attractive because the methane produced is wasted to the atmosphere and the system can not be certified for Carbon Emission Reduction trading. On the other hand, anaerobic digestion of POME provides the fastest payback of investment because the treatment enables biogas recovery for heat generation and treated effluent for land application. Lastly, it is proposed herewith that wastewater management based on the promotion of cleaner production and environmentally sound biotechnologies should be prioritized and included as a part of the POME management in Malaysia for attaining sustainable development. This paper thus discusses and compares state-of-the-art POME treatment methods as well as their individual performances.     

Improvement of production of lipopeptide antibiotic iturin A using fish protein

To enhance the production of lipopeptide antibiotic iturin A, nutrient contents of the culture mediums were investigated in both submerged and biofilm fermentations. As a carbon source maltose and as nitrogen source, fish protein was used. In submerged fermentation maltose uptake was found lower (12%) compared to biofilm fermentation (15%) that was associated with higher cellular growth in biofilm. However, requirement of nitrogen (fish protein) concentration was found similar in both submerged and biofilm fermentations. Production of iturin A in submerged fermentation with 12% maltose and 5% fish protein was 4450 mg/L, and in biofilm fermentation it was 5050 mg/L when 15% maltose and 5% fish protein was used.     

Optimum Methods of Inactivation of Strongyloides stercoralis Larvae from Reclaimed Wastewater

Strongyloidiasis presents a major health hazard when reusing wastewater. Albendazol with a concentration of 4 mg/l, a contact time of 45 min, pH 1.2 and pH 10.2, killed the larva. The larva was also killed with a 0.03% concentration of iodine and a detention time of 30 min or a 0.04% concentration of iodine and a contact time of 10 min. The required detention time to inactivate larva in water was found to be 17 days. The minimum revealed residual chlorine to kill the larvae was 4 mg/l with 120 min of detention time, and a minimum contact time was found to be 80 min with a residual of 23 mg/l. Many methods are available to inactivate the Strongyloides stercoralis, which could be acids, alkaline chemicals, larvicidal chemicals, super chlorination, or just detention time. The best method must be determined according to the prevailing specific environmental site and the feasibility of the selected method(s).     

Improvement of production of lipopeptide antibiotic iturin A using fish protein

To enhance the production of lipopeptide antibiotic iturin A, nutrient contents of the culture mediums were investigated in both submerged and biofilm fermentations. As a carbon source maltose and as nitrogen source, fish protein was used. In submerged fermentation maltose uptake was found lower (12%) compared to biofilm fermentation (15%) that was associated with higher cellular growth in biofilm. However, requirement of nitrogen (fish protein) concentration was found similar in both submerged and biofilm fermentations. Production of iturin A in submerged fermentation with 12% maltose and 5% fish protein was 4450 mg/L, and in biofilm fermentation it was 5050 mg/L when 15% maltose and 5% fish protein was used.