Biohythane production from pineapple peel using Methanosarcina mazei enhanced with palm oil mill effluent (POME) sludge in single-stage anaerobic digestion

Biohythane production via single-stage anaerobic digestion (AD) is an effective way for sustainable energy recovery from lignocellulosic biomass. In this paper, biohythane was produced through the AD process from pineapple peel waste substrate using purely cultured Methanosarcina mazei with the enhancement of palm oil mill effluent (POME) sludge as the inoculum. This study focuses on the effects of the lignocellulosic pre-treatment method, the addition of POME sludge into M. mazei culture medium as inoculum, and various operational conditions (food to microorganisms (F/M) ratios, temperature, pH) on gas production performances. The experimental results indicate that these parameters influenced the efficiency of biohythane production by producing the peak maximum biohythane production rate values (HPR_max) and (MPR_max), H₂:CH₄ = 1.93:0.67 L/L-d, and biohythane yield (HY) and (MY), H₂:CH₄ = 1.18:0.55 mL/L-substrate. This study demonstrates that biohythane gas (H₂ + CH₄ + CO₂) production from pineapple waste can be accelerated by M. mazei only with the enhancement of POME sludge through single-stage AD system under mesophilic batch process conditions.     

Mitigation of odor causing emissions—Bench-scale investigation

Emissions of malodors are considered to be the greatest threat to the compost industry. In work presented here, several simple odor mitigation alternatives were investigated for their effectiveness in preventing the release of common odorants, such as terpenes, ammonia, and reduced sulfur compounds. The mitigation methods studied included the use of a blanket of finished compost, compost amendment mixed within the feedstock, odor neutralizing agents (ONAs), and oxygen release compounds (ORCs). Among the mitigation alternatives investigated in this study, the use of finished compost as a blanket and finished compost as an amendment yielded the most conclusive and significant results. Both of these alternatives yielded a substantial emission reduction for terpenes, ammonia, and reduced sulfur compounds. The application of finished compost blanket resulted in up to 95% reduction of terpene and 25% reduction of ammonia emissions. Blending the feedstock with finished compost also provided substantial reduction of terpene emissions ranging from 73.6 to 93.1% at the 24% blending ratio, and up to 85% ammonia reduction a the 35% blending ratio. Use of finished compost also provided 75% lower reduced sulfur compound emissions at the 12% blending ratio. Misting and application of odor neutralizing agents did not result in any consistent reduction in emissions for any of the odorous compounds tested.

Implications The odor emissions from composting are often considered to be the biggest threat to composting facilities. Because most facilities cannot afford enclosures and contained composting vessels, there is a need to inexpensively and effectively control the odor emissions from composting facilities. The findings of this research can lead the way for efforts to control odor easily and cost effectively. In fact, the application of a compost blanket for odor control is already gaining acceptance by the composting industry.     

Solid-phase extraction of Mn(II) and slurry analysis of the sorbent by electrothermal atomic absorption spectrometry

In this study, a challenging preconcentration/separation method based on the sorption of manganese on ethylene glycol dimethacrylatemethacrylic acid copolymer (EGDMA-MA) treated with ammonium pyrrolidine dithiocarbamate (APDC) and its slurry analysis by electrothermal atomic absorption spectrometry was described. Optimum conditions for quantitative sorption, as well as for preparing a homogeneous and stable slurry were investigated. A 100-fold enrichment factor could be reached. The analyte element in certified sea-water and bovine-liver samples were determined in the range of 95% confidence level. The proposed technique is fast, simple, and the risk of contamination is low. The limit of detection of the method for manganese in the slurry of the blank subjected to the proposed procedure was 0.07 μg L^?1 (3δ, N:10) corresponding to 0.56 μg kg^?1 slurry.     

Comparison of fecal coliform bacteria before and after wastewater treatment plant in the Izmir Bay (Eastern Aegean Sea)

The distribution of fecal coliforms was investigated and determined in Izmir Bay from 1996 to 2005. Izmir Bay severely was polluted from industrial and domestic discharges during decades. In early 2000, a wastewater treatment plant began to treat domestic and industrial wastes. This plant treats the wastes about 80% capacity after 2001. The sampling periods cover before and after treatment plant. Assessment method for determining the number of fecal coliform has evolved membrane filtrations. Maximum surface fecal coliform concentration was 4.9 × 10⁵ cfu 100 ml^???1 in 1996–2000 period. Following the opening treatment system, fecal coliform density decreased 2.1 × 10⁴ cfu 100 ml^???1 during 2001–2005. A continuous improvement can be sustained in the water quality if direct inflow of untreated wastewater is prevented.     

The economic feasibility assessment of using tropical fruit wastes in production of fish feed for the Malaysian mahseer,Tor tambroides (Bleeker, 1854)

Journal of Material Cycles and Waste Management - Fruit wastes, including the rind, skin, pulp, and seed, contain highly nutritious organic materials; however, they are often discarded without...     

Sustainable design of sanitation system based on material and value flow analysis for urban slum in Indonesia

Material flow analysis (MFA) and value flow analysis (VFA) were applied to the sanitation system in an urban slum in Indonesia. Based on the results of the MFA and VFA, garbage and excreta disposal costs were evaluated to be 0.7% and 1.1%, respectively, of per capita income. Such value flows seem reasonable in light of the recognized affordability to pay (ATP) standard. However, current excreta disposal methods create negative impacts on downstream populations. Because such disadvantages do not go back to disposers, but passed to downstream, the current value flow structure does not motivate individual toilet users to install treatment facility. Based on current material and value flow structures, a resource recycling sanitation system scenario was examined. Based on VFA, an affordable initial cost for such a system was calculated; this was found to be comparable in price to a cheaper composting toilet that is currently available in the market.     

Monitoring metal contamination levels and fecal pollution in clam (Tapes decussatus) collected from Izmir Bay (Turkey)

The aim of this study was to monitor the heavy metal contents and fecal pollution in Tapes decussatus (carpet shell clam) from Izmir Bay (Eastern Aegean). Bivalve mollusks were sampled on January, March, July, and October 2007 in the Izmir Bay. Izmir Bay is one of the great natural bays of the Mediterranean. Concentrations of heavy metals were determined in the clams from the different seasons. Fecal coliform densities were determined to evaluate the degree of water pollution and clams’ microbiological accumulation of the classical microbial pollution indicators. The concentration of heavy metals in T. decussatus from Izmir Bay were Hg 0.044–0.13; Cd 0.026–0.24; Pb 0.38–1.2; Cr 2.3–3.7; Cu 6.4–8.4; Zn 56.0–81.8, and Ni 8.1–9.6 μg/g (dry weight). The maximum values were generally obtained in July and March except Ni. This study found that the levels of heavy metals except Cr in T. decussatus were below Spanish and European Communities legislations for shellfish as food. Microbial pollution indicators (heterotrophic bacteria and fecal coliform) were measured in T. decussatus. Maximum heterotrophic bacteria and fecal coliforms were recorded in the winter while the lowest were detected in summer.     

Twin–twin transfusion syndrome: mathematical modelling

Twin–twin transfusion syndrome (TTTS) represents a pregnancy complication with a high risk for perinatal mortality and postnatal morbidity. Mathematical models have been utilized to examine the mechanisms of disease and potential treatment modalities. We developed four consecutive models based on pathophysiology mechanisms. Conceptually, these models remained simple, but with increased complexity in details. We present our models tutorially with the necessary equations expressed in words. The aetiology of TTTS was related to AV anastomoses from donor to recipient and their growth commensurate with placental growth. We assessed that natural growth of placenta and foetuses causes the diameter and length of the AV, as well as the AV's pressure gradient, to increase proportional to gestational age. The AV transfusion then increases faster than natural foetal growth. A progressively increasing discordance subsequently develops, not compensated for by foetal growth. A simulation is performed to show how this discordance in blood volumetric development causes successive discordances in other functions, particularly renal, circulatory, and cardio-vascular, resulting in disease progression to the various stages of TTTS. In conclusion, mathematical modelling of TTTS has provided an understanding of the sequence of events that leads to the various presentations of TTTS stages as well as the efficacy of therapies. Copyright © 2008 John Wiley & Sons, Ltd.