Methane biofiltration in the presence of ethanol vapor under steady and transient state conditions: an experimental study

Methane (CH₄) removal in the presence of ethanol vapors was performed by a stone-based bed and a hybrid packing biofilter in parallel. In the absence of ethanol, a methane removal efficiency of 55 ± 1% was obtained for both biofilters under similar CH₄ inlet load (IL) of 13 ± 0.5 g_CH4 m^?3 h^?1 and an empty bed residence time (EBRT) of 6 min. The results proved the key role of the bottom section in both biofilters for simultaneous removal of CH₄ and ethanol. Ethanol vapor was completely eliminated in the bottom sections for an ethanol IL variation between 1 and 11 g_ethanol m^?3 h^?1. Ethanol absorption and accumulation in the biofilm phase as well as ethanol conversion to CO₂ contributed to ethanol removal efficiency of 100%. In the presence of ethanol vapor, CO₂ productions in the bottom section increased almost fourfold in both biofilters. The ethanol concentration in the leachate of the biofilter exceeding 2200 g_ethanol m^?3 _leachate in both biofilters demonstrated the excess accumulation of ethanol in the biofilm phase. The biofilters responded quickly to an ethanol shock load followed by a starvation with 20% decrease of their performance. The return to normal operations in both biofilters after the transient conditions took less than 5 days. Unlike the hybrid packing biofilter, excess pressure drop (up to 1.9 cmH₂O m^?1) was an important concern for the stone bed biofilter. The biomass accumulation in the bottom section of the stone bed biofilter contributed to 80% of the total pressure drop. However, the 14-day starvation reduced the pressure drop to 0.25 cmH₂O m^?1.     

Iron, cadmium, and chromium in seagrass (Thalassia testudinum) from a coastal nature reserve in karstic Yucatán

The management of protected areas in karstic regions is a challenge because flooded cave systems form there and provide underground hydrological conducts that may link different zones. As a consequence, affectations to the protected areas can possibly occur as a consequence of human activities in remote areas and may therefore pass undetected. Thus, the monitoring of possible contaminants in these regions is becoming imperative. In this work, we analyze the concentration of essential (iron) and non-essential metals (cadmium and chromium) in the seagrass Thalassia testudinum that grows in Yalahau Lagoon, located in a near-to-pristine protected area of the Yucatán Peninsula, close to the rapidly developing touristic belt of the Mexican Caribbean. Salinity and silicate patterns show that Yalahau is an evaporation lagoon, where groundwater discharge is important. High iron (>400 μg/g), cadmium (>4 μg/g), and chromium (≈1 μg/g) concentrations were found in the area of highest groundwater input of the lagoon. High levels (5.1 μg/g) were also found near the town dump. In the rest of the sampling sites, metal concentrations remained near to background levels as estimated from other works. Temporal changes of concentrations in the seagrass tissues show also a local input and an input from the groundwater that could provoke an environmental problem in the Yalahau Lagoon in the near future.     

Analysis and comparison of inertinite-derived adsorbent with conventional adsorbents

To increase U.S. petroleum energy-independence, the University of Texas at Arlington (UT Arlington) has developed a coal liquefaction process that uses a hydrogenated solvent and a proprietary catalyst to convert lignite coal to crude oil. This paper reports on part of the environmental evaluation of the liquefaction process: the evaluation of the solid residual from liquefying the coal, called inertinite, as a potential adsorbent for air and water purification. Inertinite samples derived from Arkansas and Texas lignite coals were used as test samples. In the activated carbon creation process, inertinite samples were heated in a tube furnace (Lindberg, Type 55035, Arlington, UT) at temperatures ranging between 300 and 850 degrees C for time spans of 60, 90, and 120 min, using steam and carbon dioxide as oxidizing gases. Activated inertinite samples were then characterized by ultra-high-purity nitrogen adsorption isotherms at 77 K using a high-speed surface area and pore size analyzer (Quantachrome, Nova 2200e, Kingsville, TX). Surface area and total pore volume were determined using the Brunauer Emmet, and Teller method, for the inertinite samples, as well as for four commercially available activated carbons (gas-phase adsorbents Calgon Fluepac-B and BPL 4 x 6; liquid-phase adsorbents Filtrasorb 200 and Carbsorb 30). In addition, adsorption isotherms were developed for inertinite and the two commercially available gas-phase carbons, using methyl ethyl ketone (MEK) as an example compound. Adsorption capacity was measured gravimetrically with a symmetric vapor sorption analyzer (VTI, Inc., Model SGA-100, Kingsville, TX). Also, liquid-phase adsorption experiments were conducted using methyl orange as an example organic compound. The study showed that using inertinite from coal can be beneficially reused as an adsorbent for air or water pollution control, although its surface area and adsorption capacity are not as high as those for commercially available activated carbons. Implications: The United States currently imports two-thirds of its crude oil, leaving its transportation system especially vulnerable to disruptions in international crude supplies. UT Arlington has developed a liquefaction process that converts coal, abundant in the United States, to crude oil. This work demonstrated that the undissolvable solid coal residual from the liquefaction process, called inertinite, can be converted to an activated carbon adsorbent. Although its surface area and adsorption capacity are not as high as those for commercially available carbons, the inertinite source material would be available at no cost, and its beneficial reuse would avoid the need for disposal.     

Conservation of the Toromiro Tree: Case Study in the Management of a Plant Extinct in the Wild

Abstract: We reviewed the history and conservation of Sophora toromiro , a species that has been extinct in the wild since 1960 but has survived as scattered individuals in botanic gardens and private collections. The short-term conservation of S. toromiro is dependent on the management of surviving ex situ stocks. This is being achieved through international collaboration by a working group established to coordinate the conservation management of the species. Molecular evidence indicates that the species retains greater genetic variability than expected. The greatest amount of genetic variability was located in specimens outside botanic garden collections. No unmodified natural habitat survives on Rapa Nui ( Easter Island); so opportunities to establish a viable wild population are limited. Evidence from past reintroductions indicates that the best short-term opportunity for the species is through conventional horticultural management in botanic gardens and traditional farm plots on Rapa Nui. Some extinct-in-the-wild taxa (sensu World Conservation Union 1994), such as the Toromiro, retain genetic variability, and appropriate reintroduction sites exist. These taxa represent valid priorities for conservation management.     

Heavy metals and organic carbon in sediments from the Tuy River basin,Venezuela

The Tuy River basin, located in north-central Venezuela with an annual average temperature of 27°C and precipitation of 140 cm, was selected to conduct a geochemical study of bottom sediments, with the object of establishing the natural and human influences in the abundance and distribution of Fe, Mn, Cr, Co, Cu, Ni, Pb, Zn and organic carbon. The basin is lithologically divided into two sub-basins, north and south. The north sub-basin drains a iow-grade metasedimentary terrain with a population density of 800 persons km^–2 and approximateiy 600 industrial sites, while the south sub-basin in underlain by metavolcanic and ultramafic rocks, with a population density of less than 10 persons km^–2.Stream bottom sediment samples (150) were collected during the years of 1979–1986 in 16 unpolluted sites and 13 polluted sites. The sediments were air dried at room temperature and sieved through a 120 stainless steel mesh (125 m). Samples of grain size smaller than 125 m were analysed, the heavy metals being determined by atomic absorption spectrometry and the organic carbon (Corg) by dry combustion.The higher concentrations of heavy metals and organic carbon found in the pristine areas were in the south sub-basin, especially in those areas with higher annual precipitation and tropical forest. This indicated that the metavolcanic and ultramafic rocks yield higher concentrations of heavy metals than the metasedimentary rocks. It was also noted that the higher concentrations of Cr and Ni are associated with the ultramafic rocks. The results obtained from the sediment samples collected in the polluted sites showed that the elements Pb, Zn and Corg are enriched up to 4 times as a result of ail the human activities taking place in the basin. Organic carbon is an excellent indicator of domestic wastewater, Pb and Zn are good indicators of the automotive traffic and industrial effluents. The concentrations of each heavy metal did not show any significant correlation with grain size fractions; however, the concentration of organic carbon did show a negative correlation with grain size. The lithological, climatic and vegetation influence in the abundance of heavy metals and organic carbon in stream sediments clearly indicates the necessity of establishing background levels for the area under study when carrying out studies in environmental geochemistry.     

Trends and causes of severity, size, and number of fires in northwestern California, USA

Research in the last several years has indicated that fire size and frequency are on the rise in western U.S. forests. Although fire size and frequency are important, they do not necessarily scale with ecosystem effects of fire, as different ecosystems have different ecological and evolutionary relationships with fire. Our study assessed trends and patterns in fire size and frequency from 1910 to 2008 (all fires > 40 ha), and the percentage of high-severity in fires from 1987 to 2008 (all fires > 400 ha) on the four national forests of northwestern California. During 1910-2008, mean and maximum fire size and total annual area burned increased, but we found no temporal trend in the percentage of high-severity fire during 1987-2008. The time series of severity data was strongly influenced by four years with region-wide lightning events that burned huge areas at primarily low-moderate severity. Regional fire rotation reached a high of 974 years in 1984 and fell to 95 years by 2008. The percentage of high-severity fire in conifer-dominated forests was generally higher in areas dominated by smaller-diameter trees than in areas with larger-diameter trees. For Douglas-fir forests, the percentage of high-severity fire did not differ significantly between areas that re-burned and areas that only burned once (10% vs. 9%) when re-burned within 30 years. Percentage of high-severity fire decreased to 5% when intervals between first and second fires were > 30 years. In contrast, in both mixed-conifer and fir/high-elevation conifer forests, the percentage of high-severity fire was less when re-burned within 30 years compared to first-time burned (12% vs. 16% for mixed conifer; 11% vs. 19% for fir/high-elevation conifer). Additionally, the percentage of high-severity fire did not differ whether the re-burn interval was less than or greater than 30 years. Years with larger fires and greatest area burned were produced by region-wide lightning events, and characterized by less winter and spring precipitation than years dominated by smaller human-ignited fires. Overall percentage of high-severity fire was generally less in years characterized by these region-wide lightning events. Our results suggest that, under certain conditions, wildfires could be more extensively used to achieve ecological and management objectives in northwestern California.     

Effect of audits on the extent of compliance with wastewater discharge limits

This study explores the effect of environmental self-audits (“audits”), which represent an important type of environmental management system practice, on the extent of facilities’ compliance with wastewater discharge limits. Theoretically, audits may (1) improve compliance by enhancing the effectiveness of treatment technologies and pollution prevention methods, (2) undermine compliance by distracting facilities’ personnel with audit-related administrative burdens, or (3) not influence compliance because these effects neutralize each other. By examining the extent of compliance, our study’s results reflect both improvement toward and beyond compliance. By assessing compliance with multiple pollutants separately, our study examines whether audits influence the control of different pollutants uniformly. Lastly, we employ a dynamic panel estimator, which allows us to explore whether facilities adjust their discharges dynamically, while controlling for any inertia in facilities’ pollution control systems. Our study empirically examines the U.S. chemical manufacturing sector between 1999 and 2001 using survey and publicly available EPA data.     

The impact of CO2 capture in the power and heat sector on the emission of SO2, NOx,particulate matter,volatile organic compounds and NH3 in the European Union

This study quantifies the trade-offs and synergies between climate and air quality policy objectives for the European power and heat (P&H) sector. An overview is presented of the expected performance data of CO₂ capture systems implemented at P&H plants, and the expected emission of key air pollutants, being: SO₂, NO_X, NH₃, volatile organic compounds (VOCs) and particulate matter (PM). The CO₂ capture systems investigated include: post-combustion, oxyfuel combustion and pre-combustion capture.For all capture systems it was found that SO₂, NO_x and PM emissions are expected to be reduced or remain equal per unit of primary energy input compared to power plants without CO₂ capture. Increase in primary energy input as a result of the energy penalty for CO₂ capture may for some technologies and substances result in a net increase of emissions per kWh output. The emission of ammonia may increase by a factor of up to 45 per unit of primary energy input for post-combustion technologies. No data are available about the emission of VOCs from CO₂ capture technologies.A simple model was developed and applied to analyse the impact of CO₂ capture in the European P&H sector on the emission level of key air pollutants in 2030. Four scenarios were developed: one without CO₂ capture and three with one dominantly implemented CO₂ capture system, varying between: post-combustion, oxyfuel combustion and pre-combustion.The results showed a reduction in GHG emissions for the scenarios with CO₂ capture compared to the baseline scenario between 12% and 20% in the EU 27 region in 2030. NO_x emissions were 15% higher in the P&H sector in a scenario with predominantly post-combustion and lower when oxyfuel combustion (?16%) or pre-combustion (?20%) were implemented on a large scale. Large scale implementation of the post-combustion technology in 2030 may also result in significantly higher, i.e. increase by a factor of 28, NH₃ emissions compared to scenarios with other CO₂ capture options or without capture. SO₂ emissions were very low for all scenarios that include large scale implementation of CO₂ capture in 2030, i.e. a reduction varying between 27% and 41%. Particulate Matter emissions were found to be lower in the scenarios with CO₂ capture. The scenario with implementation of the oxyfuel technology showed the lowest PM emissions followed by the scenario with a significant share allocated to pre-combustion, respectively ?59% and ?31%. The scenario with post-combustion capture resulted in PM emissions varying between 35% reduction and 26% increase.     

A Comparison of Bayesian Methods for Uncertainty Analysis in Hydraulic and Hydrodynamic Modeling

We evaluate and compare the performance of Bayesian Monte Carlo (BMC), Markov chain Monte Carlo (MCMC), and the Generalized Likelihood Uncertainty Estimation (GLUE) for uncertainty analysis in hydraulic and hydrodynamic modeling (HHM) studies. The methods are evaluated in a synthetic 1D wave routing exercise based on the diffusion wave model, and in a multidimensional hydrodynamic study based on the Environmental Fluid Dynamics Code to simulate estuarine circulation processes in Weeks Bay, Alabama. Results show that BMC and MCMC provide similar estimates of uncertainty. The posterior parameter densities computed by both methods are highly consistent, as well as the calibrated parameter estimates and uncertainty bounds. Although some studies suggest that MCMC is more efficient than BMC, our results did not show a clear difference between the performance of the two methods. This seems to be due to the low number of model parameters typically involved in HHM studies, and the use of the same likelihood function. In fact, for these studies, the implementation of BMC results simpler and provides similar results to MCMC. The results of GLUE are, on the other hand, less consistent to the results of BMC and MCMC in both applications. The posterior probability densities tend to be flat and similar to the uniform priors, which can result in calibrated parameter estimates centered in the parametric space.