Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique

The porous composites of clay and fly ash have the potential to be used in many fields, such as catalyst support and gas adsorbents. In this study, various ratios of fly ash (1–2) with different percentage of suspension (50–70 wt%) were applied to produce porous clay-fly ash composites via polymeric replica technique. Fabrication process starts by mixing clay and fly ash in distilled water to form slurry. The process is followed by fully immersing polymer sponge in slurry. The excess slurry is then removed through squeezing. Finally, the sponge coated with slurry is sintered at 500 and 1250 °C for 1 h. It is found that the compressive strength of porous composites improves significantly (0.178–1.28 MPa) when the amount of clay-fly ash suspension mixture (50–70 wt%) increases. The compressive strength of porous composites is mainly attributed to the mullite, quartz and amorphous phase formations. These results are supported by X-ray diffraction analysis. On the other hand, increase in the amount of suspension reduces the apparent density (from 2.44 to 2.32 g/cm³) and porosity (from 97 to 85 %). The reduction in apparent density is believed to be caused by the presence of high fly ash content in porous composites. The melted fly ash cenospheres have closed the internal pores and increased density of samples. Higher suspension level not only reduces porosity, but also increases close pores of the porous composites. The results are justified through the observation from the structures of porous clay-fly ash composites.     

Wood Polypropylene (PP) Composites Manufactured by Mango Wood Waste with Virgin or Recycled PP: Mechanical,Morphology, Melt Flow Index and Crystalline Behaviour

Compositions of wood-polypropylene composites (WPCs) are prepared through melt compounding followed by injection moulding. WPCs are formulated for eight compositions with a different weight ratio of wood, virgin or recycled polypropylene and coupling agent. WPCs compositions are compared in terms of Melt Flow Index, Tensile, FESEM images, Flexural and crystallinity index for same operating variable conditions. From the results, recycled polypropylene based WPCs are superior in comparison to virgin polypropylene based WPCs. With the addition of 5 % coupling agent in recycled polypropylene-based composites for 45:50 composition, tensile and flexural values of WPCs are higher in comparison to all composition and neat virgin or recycled polypropylene. This work stands for the utilization of waste wood with recycled plastic for replacement of wood and virgin plastic.     

Consumption of unsafe food in the adjacent area of Hazaribag tannery campus and Buriganga River embankments of Bangladesh: heavy metal contamination

The concentrations of Cr, Cd, Pb, Hg, and As in water, poultry meat, fish, vegetables, and rice plants obtained from the area adjacent to the Hazaribag tannery campus, Dhaka, Bangladesh, were estimated and compared with permissible levels established by the WHO and FAO and levels reported previously by other authors. The metal contents were in the following order according to the concentration in contaminated irrigation water: Cr?>?Pb?>?As?>?Hg?>?Cd. Mean concentrations of Cr, Pb, Hg, and As in irrigated water were above the permissible levels, whereas the results were below the permissible levels for Cd. The metal concentrations in poultry meat, fish, rice, and vegetables were in the following orders: Pb?>?Cr?>?Cd?>?Hg?>?As, Pb?>?Cr?>?Cd?>?As?>?Hg, Pb?>?As, and Cr?>?Pb?>?Cd?>?As?>?Hg, respectively. The mean concentrations of metals in poultry meat, fish, rice, and vegetables were much higher than the permissible levels. The trends of weekly intake of heavy metals (WIMs) from poultry meat, fish, rice, and vegetables were as follows: Pb?>?Cr?>?Cd?>?Hg?>?As, Pb?>?Cr?>?Cd?>?As?>?Hg, Pb?>?As, and Cr?>?Pb?>?Cd?>?As?>?Hg, respectively. WIMs for all the metals were lower than the provisional maximum weekly intake recommended by WHO/FAO and USNAS.     

Household solid waste characteristics and management in Chittagong, Bangladesh

Solid waste management (SWM) is a multidimensional challenge faced by urban authorities, especially in developing countries like Bangladesh. We investigated per capita waste generation by residents, its composition, and the households' attitudes towards waste management at Rahman Nagar Residential Area, Chittagong, Bangladesh. The study involved a structured questionnaire and encompassed 75 households from five different socioeconomic groups (SEGs): low (LSEG), lower middle (LMSEG), middle (MSEG), upper middle (UMSEG) and high (HSEG). Wastes, collected from all of the groups of households, were segregated and weighed. Waste generation was 1.3kg/household/day and 0.25kg/person/day. Household solid waste (HSW) was comprised of nine categories of wastes with vegetable/food waste being the largest component (62%). Vegetable/food waste generation increased from the HSEG (47%) to the LSEG (88%). By weight, 66% of the waste was compostable in nature. The generation of HSW was positively correlated with family size (r(xy)=0.236, p<0.05), education level (r(xy)=0.244, p<0.05) and monthly income (r(xy)=0.671, p<0.01) of the households. Municipal authorities are usually the responsible agencies for solid waste collection and disposal, but the magnitude of the problem is well beyond the ability of any municipal government to tackle. Hence dwellers were found to take the service from the local waste management initiative. Of the respondents, an impressive 44% were willing to pay US$0.3 to US$0.4 per month to waste collectors and it is recommended that service charge be based on the volume of waste generated by households. Almost a quarter (22.7%) of the respondents preferred 12-1pm as the time period for their waste to be collected. This study adequately shows that household solid waste can be converted from burden to resource through segregation at the source, since people are aware of their role in this direction provided a mechanism to assist them in this pursuit exists and the burden is distributed according to the amount of waste generated.     

Differential livelihood adaptation to social-ecological change in coastal Bangladesh

Regional Environmental Change - Social-ecological changes, brought about by the rapid growth of the aquaculture industry and the increased occurrence of climatic stressors, have significantly...     

Multi‐strainer model concept for conjunctive pumping of saline and non‐saline groundwater from coastal aquifers

The current paper discusses the multi‐strainer technique developed to augment usable water by the combined use of saline and non‐saline aquifers in locations where a freshwater aquifer is underlain or overlain by a saline water aquifer. The multi‐strainer technique evaluates design criteria for the formulation of multi‐strainer schemes to supply water at an acceptable salinity limit by combined use of the saline and non‐saline aquifers. The design ratio of discharges can be maintained by adjusting the strainers’ lengths in the saline and non‐saline aquifers. The multi‐strainer scheme has been applied in the coastal aquifers of Bangladesh and found to be effective at lowering the water salinity concentrations to acceptable levels, thus increasing the availability of water for sustainable use. The multi‐strainer scheme should be designed based on the thickness of the aquifer layers to be screened, the salinity concentrations of the screened layers, and the level of salinity concentration to be maintained.     

Restraint use in the Eastern Province of the Kingdom of Saudi Arabia

Objectives: This study set out to examine seat belt and child restraint use in the Dammam Municipality of the Kingdom of Saudi Arabia, based on the premise that an increase in seat belt use would significantly reduce personal injury in traffic crashes. It was expected that local data would help identify intervention strategies necessary to improve seat belt use in the region.

Methods: The research involved 2 methodologies. First, 1,389 face-to-face interviews were conducted with male and female adults in regional shopping plazas regarding their own and their children's restraint use in their vehicles and reasons for these attitudes and beliefs. Second, 2 on-road observation studies of adult and child restraint use were conducted by trained observers. Occupants of approximately 5,000 passenger vehicles were observed while stopped at representative signalized traffic intersections.

Results: The findings showed front seat belt use rates of between 43 and 47% for drivers and 26 to 30% for front seat passengers; rear seat belt use rates were lower. While there seemed to be some knowledge about the purpose and reasons for restraining both adults and children in suitable restraints, this failed to be confirmed in the on-road observations.

Conclusions: Reasons for these rates and findings are discussed fully, and recommendations for improving seat belt use in the Dammam Municipality are included.     

Multiwell Technique of Saline and Nonsaline Groundwater Pumping from Coastal Aquifers

In this article, the authors explore their recent study, which introduces the concept of extracting saline water and fresh water simultaneously from groundwater aquifers to produce water that is suitable for irrigation. To achieve these results, multiwell modeling concepts are used to exploit both the saline and nonsaline aquifer domains from geologic formations where a freshwater aquifer domain is either underlain or overlain by a saline aquifer domain. The water from these domains are either mixed to an acceptable salinity level after independent withdrawal from separate, saline or nonsaline domains present within the same aquifer, or mixed from the domains to achieve acceptable levels of salinity before withdrawal.     

Mitigating Global Warming Potentials of Methane and Nitrous Oxide Gases from Rice Paddies under different irrigation regimes

A field experiment was conducted in Bangladesh Agricultural University Farm to investigate the mitigating effects of soil amendments such as calcium carbide, calcium silicate, phosphogypsum, and biochar with urea fertilizer on global warming potentials (GWPs) of methane (CH₄) and nitrous oxide (N₂O) gases during rice cultivation under continuous and intermittent irrigations. Among the amendments phosphogypsum and silicate fertilizer, being potential source of electron acceptors, decreased maximum level of seasonal CH₄ flux by 25–27 % and 32–38 % in continuous and intermittent irrigations, respectively. Biochar and calcium carbide amendments, acting as nitrification inhibitors, decreased N₂O emissions by 36–40 % and 26–30 % under continuous and intermittent irrigations, respectively. The total GWP of CH₄ and N₂O gases were decreased by 7–27 % and 6–34 % with calcium carbide, phosphogypsum, and silicate fertilizer amendments under continuous and intermittent irrigations, respectively. However, biochar amendments increased overall GWP of CH₄ and N₂O gases.     

Report: Healthcare waste characterization in Chittagong Medical College Hospital, Bangladesh

Healthcare waste management (HCWM) options are inconsistent in Bangladesh. One of the first critical steps in the process of developing a reliable waste management plan requires a comprehensive understanding of the quantities and characteristics of the waste that needs to be managed. This study took into consideration both the quantity and quality of the generated waste to determine the generation rates and physical properties of healthcare waste (HCW) in Chittagong Medical College Hospital (CMCH) and also to estimate the amount of infectious and non-infectious waste generated in different wards. CMCH, the second largest hospital in Bangladesh, comprises 34 wards, 12 of which were selected randomly. Waste materials were collected from these wards and then segregated and weighed. Waste generation per day was found to be 73.22 kg/ward, 1.28 kg/bed and 0.57 kg/patient. A total of 2490 kg of HCW was produced each day in CMCH (37% being infectious and the rest being non-infectious waste). Infectious waste was 27.07 kg per ward, 0.47 kg per bed and 0.21 kg per patient and the non-infectious waste was 46.15 kg per ward, 0.81 kg per bed and 0.36 kg per patient per day. HCW comprised eight categories of waste materials with vegetable/food waste being the largest component (50.21%) and varied significantly (P < 0.05) among the 12 different wards studied. The greatest amount of HCW was recorded (154 kg) in Orthopaedics followed by 96.66 kg in the Medicine Unit-3 and the smallest amount was recorded in Casualty (8.79 kg). The amount of HCW was positively correlated with the number of occupied beds (rxy = 0.79, P < 0.01). There is no structured form of medical waste treatment in CMCH and most waste materials are dumped in open areas for natural degradation or re-sold by scavengers. It is essential to develop a national policy and implement a comprehensive action plan for HCWM that will provide environmentally sound technological measures to improve HCWM in Bangladesh.