X-ray metal assessment and ovarian ultrastructure alterations of the beetle,Blaps polycresta (Coleoptera,Tenebrionidae), inhabiting polluted soil

Environmental Science and Pollution Research - X-ray analysis was applied to estimate the percentages of heavy metals in ovarian tissues of the tenebrionid beetle, Blaps polycresta. Calcium,...     

Influence of preparation method on structural,optical, magnetic,and adsorption properties of nano-NiFe2O4

Nickel ferrite (NiFe₂O₄) nanoparticles are prepared through different routes (microwave, co-precipitation, and pyrolysis) and tested for water purification applications through adsorption removal of an acid red dye B as a model organic pollutant. The characterizations of the prepared samples were done using XRD, FT-IR, SEM, TEM, BET, UV-Vis absorbance, Raman spectrum, and vibrating sample magnetometer (VSM). All samples showed an inverse spinel crystal structure. The obtained results pointed out to the effect of the synthetic route on the morphology, particle size, optical, and magnetic properties of the prepared ferrites. Magnetic measurements showed super-paramagnetic behavior for all samples. The magnetic saturation (M_s) of the sample prepared by pyrolysis, was found to possess the highest saturation value, 34.8 emu/g. Adsorption experiments were performed under the change in several parameters, such as pH, adsorbent dosage, and initial dye concentration. A dye removal percentage of 99% was reached under the optimum state. The isothermal adsorption of the acid red dye was investigated using several models, in which the experimental data could be best described by the Freundlich model. Several kinetic and equilibrium models were inspected by linear regression analysis and showed best fitting for the adsorption data through pseudo-second-order model. The calculated thermodynamic parameters indicated that the adsorption of acid red dye onto all the ferrite samples is a spontaneous and endothermic physical adsorption process.

     

Technologically enhanced 210Pb and 210Po in iron and steel industry

Iron and steel manufacture has been ranked as the largest industrial source of environmental contamination in the USA; the wastes generated in their production processes contain heavy elements that can be a source of contamination, and natural radionuclides that can produce an occupational and/or public radiological impact. In this work the potential occupational effective dose rate (μSv/y) due to inhalation in four integrated steel-making factories from Egypt has been evaluated, by assuming a well defined scenario and with basis in the ²¹⁰Pb and ²¹⁰Po activity concentrations determined in ore and wastes collected in the aforementioned factories. Activity concentrations, in Bq/kg, of ²¹⁰Pb and ²¹⁰Po, and leachable Pb and Fe were measured using gamma-ray spectrometry based on HPGe detector, alpha particle spectrometry based on PIPS detector, and inductively coupled plasma-mass spectrometry (ICP-MS). Levels of ²¹⁰Pb and ²¹⁰Po in the range of <DL-4238 and 1-5660 Bq/kg, respectively, were found. According to the assumed scenarios, the occupational exposures by inhalation are much lower than the recommended annual effective dose limit, although the environmental impact due to waste storage and/or use should be considered based on case by case evaluation.     

Hair as a marker for pesticides exposure

Rats were orally treated with mixtures of chlorinated pesticides. Hair was collected and analyzed for pesticide residues over a period of up to four weeks. Quantitative and qualitative analysis of the recovered pesticides in hair were determined using gas chromatography with electron capture detector. Results suggest that hair can be used as a biomarker for the monitoring of organochlorinated pesticide residues at low parts per billion levels. Chlorinated pesticides were also detected in human hair of environmentally exposed and occupationally exposed individuals, which indicates that hair can be used for monitoring pesticides exposure.     

Annual and weekly patterns of ozone and particulate matter in Jeddah,Saudi Arabia

Air pollution has been an increasing concern within the Kingdom of Saudi Arabia and other Middle Eastern countries. In this work the authors present an analysis of daily ozone (O₃), nitrogen oxide (NO_x), and particulate matter (<10 μm aerodynamic diameter; PM₁₀) concentrations for two years (2010 and 2011) at sites in and around the coastal city of Jeddah, as well as a remote background site for comparison. Monthly and weekly variations, along with their implications and consequences, were also examined. O₃ within Jeddah was remarkably low, and exhibited the so-called weekend effect—elevated O₃ levels on the weekends, despite reduced emissions of O₃ precursors on those days. Weekend O₃ increases averaged between 12% and 14% in the city, suggesting that NO_x/volatile organic compound (VOC) ratios within cities such as Jeddah may be exceptionally high. Sites upwind or far removed from Jeddah did not display this weekend effect. Based on these results, emission control strategies in and around Jeddah must carefully address NO_x/VOC ratios so as to reduce O₃ at downwind locations without increasing it within urban locations themselves. PM₁₀ concentrations within Jeddah were elevated compared with North American cites of similar climatology, though comparable to other large cities within the Middle East.

Implications:Daily concentrations of O₃, PM₁₀, and NO_x in and around the city of Jeddah, Saudi Arabia, are analyzed and compared with those of other reference cities. Extremely low O₃ levels, along with a significant urban weekend effect (higher weekend O₃, despite reduced NO_x concentrations), is apparent, along with high levels of PM₁₀ within the city. Urban O₃ in Jeddah was found to be lower than that of other comparable cities, but the strong weekend effect suggests that care must be taken to reduce downwind O₃ levels without increasing them within the city itself. Further research into the emissions and chemistry contributing to the reduced O₃ levels within the city is warranted.     

Evaluation of the gene expression changes in Nile tilapia (<Emphasis Type="Italic">Oreochromis niloticus</Emphasis>) as affected by the bio-removal of toxic textile dyes from aqueous solution in small-scale bioreactor

A laboratory-scale bioremediation unit was designed, built and tested for the bio-removal of several Direct textile dyes. Four experiments were carried out to assess the efficiency of the bioremediation unit using Aspergillus niger fungal strain. Three commonly used Direct dyes and textile dyes mixture (simulated effluent: Direct brown, Direct violet, Direct green) were tested in this study. The strain of A. niger was efficient in the removal of the three Direct dyes. The decolorization percentages of the dyes after 24 h of incubation were 56.2, 51.7, and 95.4% for Direct brown, Direct green, Direct violet dyes, respectively. The percentages increased up to 79.4, 86.4, and 96.7% after 72 h of incubation for the same dyes, respectively. The results also showed that the fungal strain reduced the chemical oxygen demand values of simulated dye effluents from 165 to 564 mg/l with most of the dyes. The assessment of bioremediation products on biomodel was conducted using a fresh water fish. The liver and brain of Nile tilapia were tested to evaluate the expression of genes coding for several proteins related to stress such as metallothioneins (MTs), cytochrome P450 (CYP450), and heat shock proteins (HSPs). To assess the alterations in the gene expression, ten animals from each group were killed after 4 weeks of treatment. The results revealed significant increases in the brain and hepatic mRNA levels of all stress protein genes MT, CYP450, Hsp70a, b, and Hsp47 in the fish groups treated with industrial Direct violet, green, and brown dye water. Exposure of tilapia to bioremediation products after treatment with A. niger fungi reduced the over-expression of the stress protein genes in the brain and liver tissues.     

Natural resistance of rose petals to microbial attack

Petals of red, yellow and white roses (Rosa damascene Mill.) of the family Rosaceae were extracted with (1:1) methylene chloride/methanol and tested for their antimicrobial activities against four species of Gram-positive bacteria (Bacillus cereus, Bacillus subtilis, Micrococcus luteus and Staphylococcus aureus), five species of Gram-negative bacteria (Enterobacter aerogenes, Escherichia coli, Klebsiella pneumonia, Pseudomonas aeruginosa and Serratia marcescens) and five species of fungi (Penicillium notatum, Aspergillus niger, Rhizopus stolonifer, Saccharomyces cerevisiae and Fusarium oxysporum). All of the crude extracts showed a wide range of antimicrobial activities according to the tested organism and rose's type. Micrococcus luteus was found to be the most susceptible bacteria to all crude extracts. Red and yellow petal extracts showed much higher antibacterial activity than the white petals extract. Bacillus subtilis was found to be the least susceptible to all extracts. The fungus, Penicillium notatum was found to be the most susceptible with white petal extract being the most effective. Saccharomyces cerevisiae and Fusarium oxysporum were the least susceptible to all extracts. White roses extract showed much higher antifungal activities against Penicillium notatum than red or yellow roses, therefore, it was subjected to several bioassay guided chromatographic fractionations and purification to isolate the active chemical(s) responsible for the antifungal activity. Chemical structure of the isolated antifungal compounds were identified by spectroscopy techniques and found to be a γ-sitosterol and (Z,Z)-9,12-octadecadienoic acid. Antibacterial activity of the various types of rose extracts were due to complex mixtures of organic compounds which are still under chemical investigation and will be published later.     

APPLICATION OF AN ENVIRONMENTAL AND ECONOMIC MODELING SYSTEM FOR WATERSHED ASSESSMENTS1

ABSTRACT: A National Pilot Project (NPP) on Livestock and the Environment was initiated in 1992 to help provide solutions to environmental problems associated with livestock production. A major development of the NPP was the Comprehensive Economic and Environmental Optimization Tool‐Livestock and Poultry (CEEOT‐LP), an integrated modeling system designed to produce economic and environmental indicators for alternative policy scenarios applied to intensive livestock production watersheds. The system consists of a farm‐level economic model (FEM) and two environmental models: the field‐scale APEX model and the watershed‐level SWAT model. To date, CEEOT‐LP has been applied to two watersheds in Texas and one in Iowa. Predicted reductions in P losses for two P‐based manure application rate scenarios, relative to baseline conditions, ranged from ?4 to ?54 percent across the three watersheds; however, N loss impacts ranged from a decrease of 34 percent to an increase of 79 percent. For five other alternative scenarios that were simulated for only one watershed, N and P loss impacts ranged between a reduction of 78 percent to an increase of 20 percent. Aggregate watershed‐level economic impacts of the seven scenarios spanned a spectrum of a 27 percent decrease to a 25 percent increase in profit, relative to the baseline.     

Chromium removal from water by activated carbon developed from waste rubber tires

Because of the continuous production of large amount of waste tires, the disposal of waste tires represents a major environmental issue throughout the world. This paper reports the utilization of waste tires (hard-to-dispose waste) as a precursor in the production of activated carbons (pollution-cleaning adsorbent). In the preparation of activated carbon (AC), waste rubber tire (WRT) was thermally treated and activated. The tire-derived activated carbon was characterized by means of scanning electron microscope, energy-dispersive X-ray spectroscopy, FTIR spectrophotometer, and X-ray diffraction. In the IR spectrum, a number of bands centred at about 3409, 2350, 1710, 1650, and 1300–1000 cm^?1 prove the present of hydroxyl and carboxyl groups on the surface of AC in addition to C═C double bonds. The developed AC was tested and evaluated as potential adsorbent removal of chromium (III). Experimental parameters, such as contact time, initial concentration, adsorbent dosage and pH were optimized. A rapid uptake of chromium ions was observed and the equilibrium is achieved in 1 h. It was also found that the adsorption process is pH dependent. This work adds to the global discussion of the cost-effective utilization of waste rubber tires for waste water treatment.