Preparation of Viscose Fibres Stripped of Reactive Dyes and Wrinkle-Free Crosslinked Cotton Textile Finish

The chemical recycling of cellulosic fibres may represent a next-generation fibre–fibre recycling system for cotton textiles, though remaining challenges include how to accommodate fibre blends, dyes, wrinkle-free finishes, and other impurities from finishing. These challenges may disrupt the regeneration process steps and reduce the fibre quality. This study examines the impact on regenerated viscose fibre properties of a novel alkaline/acid bleaching sequence to strip reactive dyes and dimethyloldihydroxyethyleneureas (DMDHEU) wrinkle-free finish from cotton textiles. Potentially, such a bleaching sequence could advantageously be integrated into the viscose process, reducing the costs and environmental impact of the product. The study investigates the spinning performance and mechanical properties (e.g., tenacity and elongation) of the regenerated viscose fibres. The alkaline/acid bleaching sequence was found to strip the reactive dye and DMDHEU wrinkle-free finish from the cotton fabric, so the resulting pulp could successfully be spun into viscose fibres, though the mechanical properties of these fibres were worse than those of commercial viscose fibres. This study finds that reactive dyes and DMDHEU wrinkle-free finish affect the viscose dope quality and the regeneration performance. The results might lead to progress in overcoming quality challenges in cellulosic chemical recycling.     

Assessment of the natural-cultural resources in Çanakkale for nature-based tourism

While the world is going into different tourism expectations, the tourism understanding in Turkey is defined as tourism in the sea-sand-sun triangle. However, it is possible to contribute to the income and local development of the indigenous people by developing nature-based tourism. Besides, with the sustainable use and preservation of the natural-cultural assets, the damage of the traditional tourism industry on the natural and cultural environment could be reduced. In this study, it is aimed to bring up the nature-based tourism concept in Çanakkale by evaluating the nature-based tourism industry in the general of Turkey and assessing the natural-cultural resources that Çanakkale comprehends. The most important areas that have a nature-based tourism potential in Çanakkale and the tourism activities that are most suitable for these areas have been determined.     

Potential of fly ash for neutralisation of acid mine drainage

Lignite (PK), bituminous (FI) and biomass (SE) fly ashes (FAs) were mineralogically and geochemically characterised, and their element leachability was studied with batch leaching tests. The potential for acid neutralisation (ANP) was quantified by their buffering capacity, reflecting their potential for neutralisation of acid mine drainage. Quartz was the common mineral in FAs detected by XRD with iron oxide, anhydrite, and magnesioferrite in PK, mullite and lime in FI, and calcite and anorthite in SE. All the FAs had high contents of major elements such as Fe, Si, Al and Ca. The Ca content in SE was six and eight times higher compared to PK and FI, respectively. Sulphur content in PK and SE was one magnitude higher than FI. Iron concentrations were higher in PK. The trace element concentrations varied between the FAs. SE had the highest ANP (corresponding to 275 kg CaCO₃?tonne^?1) which was 15 and 10 times higher than PK and FI, respectively. The concentrations of Ca²⁺, SO₄ ^2?, Na⁺ and Cl^? in the leachates were much higher compared to other elements from all FA samples. Iron, Cu and Hg were not detected in any of the FA leachates because of their mild to strong alkaline nature with pH ranging from 9 to 13. Potassium leached in much higher quantity from SE than from the other ashes. Arsenic, Mn and Ni leached from PK only, while Co and Pb from SE only. The concentrations of Zn were higher in the leachates from SE. The FAs used in this study have strong potential for the neutralisation of AMD due to their alkaline nature. However, on the other hand, FAs must be further investigated, with scaled-up experiments before full-scale application, because they might leach pronounced concentrations of elements of concern with decreasing pH while neutralising AMD.     

Modeling 4-Chlorophenol Removal from Aqueous Solutions by Granular Activated Carbon

Since phenols and phenolic compounds in many industrial wastewaters are toxic organic contaminants for humans and aquatic life, to remove these compounds via the most efficient way is very important for environmental remediation treatment. In this context, almost all of the isotherm models (Freundlich, Langmuir, Temkin, Redlich–Peterson, Sips, and Khan) for adsorption in the literature were applied to explain the adsorption mechanism of 4-chlorophenol on activated carbon in this study. Also theoretical modeling data were obtained using model equations; interpolation and analysis of variance were made to compare data by using statistics software. In addition, the thermodynamic and kinetic studies for adsorption mechanism were included in the article. The adsorption of 4-chlorophenol on activated carbon fits well to the pseudo-first-order kinetic model than the pseudo-second-order, intraparticular diffusion and Bangham models. It is also indicated that 4-chlorophenol adsorption by granular activated carbon would be attributed to a type of transition between physical and chemical adsorption rather than a pure physical or chemical adsorption process. As a result, an environmental remediation problem and the adsorption mechanism on activated carbon that can be regarded as a solution to this problem are described and explained using the mathematical models and calculations in this study.     

Dioxins,chlorophenols and other chlorinated organic pollutants in colloidal and water fractions of groundwater from a contaminated sawmill site

BACKGROUND, AIM, AND SCOPE: The distribution of chlorinated organic contaminants in groundwater and the importance of colloids were studied in groundwater from a sawmill site contaminated by chlorophenol preservatives. MATERIALS AND METHODS: The groundwater was fractionated into three different size ranges: (1) >0.7 mum, (2) 0.4-0.7 mum and (3) 0.2-0.4 mum and the filtered water phase. The concentrations of chlorophenols (CP), chlorinated phenoxy phenols (PCPP), chlorinated diphenyl ethers (PCDE), chlorinated dibenzofurans (PCDF) and chlorinated dibenzo-p-dioxins (PCDD) were determined in each fraction. The colloids were characterised regarding the chemical composition using X-ray photoelectron spectroscopy (XPS). RESULTS: Chlorophenols were mostly found in the water fraction and PCDD/Fs were found almost exclusively in the particulate fractions. For example, the filtered water phase contained 2,100 mug l(-1) and 0.72 ng l(-1) for CPs and PCDD/Fs, respectively, and the particulate fractions contained 27 mug l(-1) and 32 ng l(-1) for CPs and PCDD/Fs, respectively. XPS evaluation of the particulate phases showed no correlation between the surface chemistry of the particle properties and the distribution of chlorinated compounds. DISCUSSION: The results suggest that groundwater transport of CPs, PCPPs, PCDEs and PCDD/Fs may occur from contaminated sawmill sites and that the colloid-facilitated transport, especially of PCDD/Fs, is substantial. The results correlated well with previous studies of compounds sorbed to dissolved organic carbon, which indicate that dissolved and colloidal organic carbon facilitated the transport of PCDEs, PCDFs and PCDDs particularly. CONCLUSIONS: Several classes of chlorinated compounds were readily detected in the groundwater samples. Due to the differences in their physicochemical properties, CPs, PCPPs, PCDEs and PCDD/Fs vary in their partitioning between colloidal fractions and the filtered groundwater. The proportion of the bound fraction increased with an increasing hydrophobicity of the chlorinated compounds. The groundwater transport of colloid-associated pollutants from the site may be significant. RECOMMENDATIONS AND PERSPECTIVES: The results imply that colloidal particles <0.7 mum are freely mobile in groundwater from this site. The groundwater transport of colloid-associated pollutants may be significant. However, the extent of the problem is not yet known and, thus, further research is needed to evaluate the impact of colloidal transport of hydrophobic organic contaminants. In Sweden alone, 400 to 500 sawmill sites are estimated to be contaminated with PCDD/Fs as a result of the former use of CP-based wood preservatives. The widespread use of CP mixtures for a variety of applications, including wood preservation, indicates that potential colloidal transport will be an issue of concern in many countries.     

Initial Screening of Contaminated Land: A Comparison of US and Swedish Methods

Preliminary surveys are used to prioritize between contaminated sites to select those to be investigated more thoroughly. The data-gathering steps are almost identical between countries; however, the assessment procedures differ significantly. In this study, we have investigated 21 contaminated sites assessed as belonging to the high-risk or the very high-risk class using the Swedish Methods for Inventories of Contaminated Sites (MICS). We then applied the US Preliminary Assessment (PA) method to the same sites and compared the results and conclusions from the two screening procedures. In both cases, all sites were recommended for further investigation and the two approaches seem to corroborate one another; however, the PA assessment scores and the preliminary MICS classifications did not correlate. The results obtained with the PA method were easier to explain than the final MICS classification. The PA method also seems more transparent and easier to standardize, although objections could be made regarding the weighting scheme, because the outcome in this study was entirely dependent on the surface exposure pathway. However, to examine this in greater detail, it is necessary to include sites with less contamination: The importance of preliminary surveys in the overall risk management process gives a strong motivation for such an evaluation. Generally, the lack of research and scientific support for the various assessment procedures in use suggests that there is a need for method development, standardization, and validation.     

Baltic Sea ecosystem-based management under climate change: Synthesis and future challenges

Ecosystem-based management (EBM) has emerged as the generally agreed strategy for managing ecosystems, with humans as integral parts of the managed system. Human activities have substantial effects on marine ecosystems, through overfishing, eutrophication, toxic pollution, habitat destruction, and climate change. It is important to advance the scientific knowledge of the cumulative, integrative, and interacting effects of these diverse activities, to support effective implementation of EBM. Based on contributions to this special issue of AMBIO, we synthesize the scientific findings into four components: pollution and legal frameworks, ecosystem processes, scale-dependent effects, and innovative tools and methods. We conclude with challenges for the future, and identify the next steps needed for successful implementation of EBM in general and specifically for the Baltic Sea.     

Indoor and outdoor radon measurements at lung cancer patients’ homes in the dwellings of Rize Province in Turkey

In this study, indoor and outdoor radon (²²²Rn) surveys were carried out in the summer and winter seasons in homes of one hundred lung cancer patients in the year 2013–2014. The aim was to investigate the relationship between radon and cancer patients. Lung cancer patients completed a questionnaire concerning their living environment, various physical parameters and living habits. Pearson correlation and t tests revealed no meaningful results between radon concentrations, on one hand, and environmental and personal living habits, on the other hand. Consequently, the BEIR VI model was adapted and ²²²Rn exposure was estimated to be responsible for about 12% of the lung cancer incidences in the winter season and around 5% in the summer season in the Rize Province. However, due to the limited number of data and numerous parameters that could lead to lung cancer, the estimations done with the model should be taken very lightly. The annual effective doses due to inhalation of indoor and outdoor ²²²Rn were estimated to be, respectively, 1.43 and 0.94 mSv y^?1. The indoor and outdoor annual effective doses were, respectively, close and below the world annual effective dose (1.3 mSv y^?1). At the district level, the indoor annual effective dose equivalent in the ?yidere district was 4.52 mSv y^?1, which was 3.5 times greater than the world average. The number of patients in the majority of the houses in this district was more than one.     

Health importance of arsenic in drinking water and food

Arsenic is a toxic metalloid of global concern. It usually originates geogenically but can be intensified by human activities such as applications of pesticides and wood preservatives, mining and smelting operations, and coal combustion. Arsenic-contaminated food is a widespread problem worldwide. Data derived from population-based studies, clinical case series, and case reports relating to ingestion of inorganic arsenic in drinking water, medications, or contaminated food or beverages show the capacity of arsenate and arsenite to adversely affect multiple organ systems. Chronic arsenic poisoning can cause serious health effects including cancers, melanosis (hyperpigmentation or dark spots, and hypopigmentation or white spots), hyperkeratosis (hardened skin), restrictive lung disease, peripheral vascular disease (blackfoot disease), gangrene, diabetes mellitus, hypertension, and ischemic heart disease.     

Monitoring and measurement of microalgae using the first derivative of absorbance and comparison with chlorophyll extraction method

Monitoring of microalgae in water supplies and industrial applications are becoming increasingly important, yet there are few options available that are simple and accurate, and can provide real-time information. The present work illustrates a new method to determine the concentration of microalgae in water and wastewater using spectrophotometry and the first derivative of absorbance. Chlorella vulgaris was used as an indicator microalga, spiked in water samples representing a range of water qualities (distilled water, surface water, and wastewater), and correlations among C. vulgaris concentrations, absorbance, and the first derivative of absorbance measurements were investigated. In addition, detection limits were established and sensitivity analyses were carried out to determine the lowest C. vulgaris concentrations that can be confidently measured in different water matrices. Finally, the study compared the performance and detection limits of the spectrophotometry-based methods with the well-accepted chlorophyll extraction method. A strong linear relationship (R²?>?0.97) was found between C. vulgaris concentration and absorbance at 695 nm. Using the first derivative of absorbance improved C. vulgaris detection limits by reducing the effects of the background noise and interferences from other substances. The detection limits established using the first derivative method were 0.47, 0.56, and 1.96 mg TVS/L in distilled water, surface water, and wastewater, respectively. In comparison, the detection limits of the chlorophyll extraction method were found to be 19.6, 38.6, and 48.3 mg TVS/L in the same water matrices. These results indicate that first derivative of absorbance can be successfully used for monitoring of microalgae in surface waters and environmental samples as well as in bioreactors used for microalgae cultivation in industrial applications.