Zinc tolerance and uptake by <Emphasis Type="Italic">Arabidopsis halleri ssp. gemmifera</Emphasis> grown in nutrient solution

Background, aim, and scope  

Zinc is an essential micronutrient element but its concentrations found in contaminated soils frequently exceed those required by the plant and soil organisms, and thus create danger to animal and human health. Phytoremediation is a technique, often employed in remediation of contaminated soils, which aims to remove heavy metals or other contaminants from soils or waters using plants. Arabidopsis (A.) halleri ssp. gemmifera is a plant recently found to be grown vigorously in heavy metal contaminated areas of Japan and it contained remarkably high amount of heavy metals in its shoots. However, the magnitude of Zn accumulation and tolerance in A. halleri ssp. gemmifera need to be investigated for its use as a phytoremediation plant.     

Removal of estrogenic activity of natural steroidal hormone estrone by ligninolytic enzymes from white rot fungi

Natural steroidal hormone estrone (E1) was treated with the white rot fungus Phanerochaete sordida YK-624 under ligninolytic condition with low-nitrogen and high-carbon culture medium. E1 decreased by 98% after 5 d of treatment and the activities of ligninolytic enzymes, manganese peroxidase (MnP) and laccase, were detected during treatment, which suggested that the disappearance of E1 is related to ligninolytic enzymes produced extracellularly by white rot fungus. Therefore, E1 was treated with MnP and laccase prepared from the culture of white rot fungi. HPLC analysis demonstrated that E1 disappeared completely in the reaction mixture after 1 h of treatment with either MnP or laccase. Using the yeast two-hybrid assay system, it was also confirmed that both enzymatic treatments completely removed the estrogenic activity of E1 after 2 h. These results strongly suggest that ligninolytic enzymes are effective in removing the estrogenic activity of E1.     

Application of rotating cylinder method for ecotoxicological evaluation of antifouling paints

The environmental impact of two biocide-free antifouling paints, fluoropolymer and silicone types, painted on a test cylinder was assessed using a battery of ecotoxicity test and chemical analyses for organic micro-pollutants such as perfluoroalkyl substances (PFAS). A biocide paint containing zinc pyrithione (ZnPT₂) and cuprous oxide was assessed as a positive control. A standardized laboratory rotating-cylinder method using each test cylinder with artificial seawater was performed for 45 days. After 1?h rotation, the leaked seawater was subjected for bioassay and chemical analyses twice weekly. The seawater extracts from the biocide paint showed adverse effects on bacteria, algae, and crustaceans, but those from the biocide-free paints did not. The leakage seawater from biocide-free paints, after 7-day continuous rotation, contained the same concentration levels of PFAS as blank seawater used to conduct the tests. Thus, no significant toxicities of the biocide-free paints were found under the conditions of this study. Simultaneous analysis of ZnPT₂ and copper pyrithione (CuPT₂) was developed using an HPLC with a polymeric resin column, showing that ZnPT₂ was converted to CuPT₂ by trans-chelation in the leakage seawater from the positive control paint. The experimental results using a laboratory rotating-cylinder method demonstrated that biocide-free paints did not markedly affect three species tested and no PFAS was detected. In contrast, biocide paint was significantly toxic to test species and toxicity of the extract on bacteria was partly responsible for CuPT₂ produced in leakage seawater. Thus, a laboratory rotating-cylinder method may be applied for ecotoxicological assessment of antifouling paints.     

Degradation of bisphenol A by photo-fenton processes

The photo-Fenton reactions, which could yield hydroxyl radicals via the catalytic degradation of H₂O₂ by Fe(II), were focused as one of the abiotic degradation processes of bisphenol A (BPA) in surface waters. At pH 6, in the presence of H₂O₂ only, 32% of BPA was degraded after 120?min of irradiation. However, 97% of BPA was degraded in the presence of both H₂O₂ and Fe(II). Without light irradiation, no BPA degradation was observed even in the presence of Fe(II) and H₂O₂. These results show that photo-Fenton processes are effective in the natural attenuation of BPA in surface water. In addition, the presence of humic acids (HAs), which were of more aliphatic nature, resulted in enhancing BPA degradation via the photo-Fenton processes. Therefore, HAs can be one of the important factors in enhancing the degradation of BPA in surface water via the photo-Fenton processes.     

Study on 14C-BHA absorption and distribution in rat

BHA was administered to rats at doses of 5 or 500 mg/kg for seven days. ¹⁴C-BHA absorption was investigated on the eighth day and compared with animals receiving a single dose of 5 or 500 mg/kg BHA. Absorption of ¹⁴C-BHA was proportionately greater at the high dose rats. ¹⁴C distribution was 3–6 times higher in the forestomach than in the pyloric region of the stomach. The urinary excretion of BHA conjugates was not dependent on pretreatment with BHA or on the dose.     

Respiratory uptake kinetics of neutral hydrophobic organic chemicals in a marine benthic fish, Pseudopleuronectes yokohamae

We investigated the respiratory uptake kinetics of polychlorinated biphenyls (PCBs), organohalogen pesticides (OCPs), polycyclic aromatic hydrocarbons (PAHs), and 2,2′,4,4′-tetrabrominated diphenyl ether (BDE #47) in a marine benthic fish, Pseudopleuronectes yokohamae. The respiratory uptake efficiencies (E_W) of the chemicals, of which there have been no reports for the majority of persistent organic pollutants (POPs), were obtained by measuring the respiratory uptake rate constants (k₁) and the oxygen consumption rates of fish. Fish were exposed to water in which these chemicals were dissolved at environmentally relevant concentrations for 28 d, followed by 168 d of depuration in clean seawater. The k₁ and E_W values for 99 compounds were obtained, and they ranged from 2000 to 42 000 L kg-lipid⁻¹ d⁻¹ and from 0.060 to 1.3, respectively. The E_W values of the chemicals, except for PAHs, tended to increase with increasing values of the log octanol–water partition coefficients (K_OW) of the chemicals up to a log K_OW of 5. For log K_OW in the range 3–5, the E_W values in this study were much lower than those in a published study (about one-third). As a result of analysis by a two-phase resistance model, the resistance of transport rates to the lipid phase in this study was lower than was the case in the published study. These findings indicate that the E_W predicted by the published study for log K_OW in the range 3–5 may differ among fish species and water temperature, and further study is needed.     

Degradation of a Terephthalate-containing Polyester by Thermophilic Actinomycetes and <Emphasis Type="Italic">Bacillus</Emphasis> Species Derived from Composts

We intended to find thermophilic degraders of terephthalate-containing Biomax^® films. Films in mesh bags were buried in composts (inside temperature: approximately 55–60 °C), resulting in the degradation of them in 2 weeks. Fluorescent microscopy of films recovered from composts showed that microorganisms gradually covered the surface of a film during composting. DGGE analysis of microorganisms on the composted film indicated the presence of Bacillus species as main species (approximately 80% of microbial flora) and actinomycetes (approximately 10–20%) as the second major flora. Isolation of Biomax^®-utilizing bacteria was focused on these two genera: two actinomycetes and one Bacillus species were isolated as pure best degraders from the composted polymer films, which were fragmented into small pieces. All the strains were thermophilic and identified, based on their 16S rDNA analyses. Degradation of polymer films was confirmed by (1) accelerated fragmentation of films in composts, compared with a control (no inoculum) and resultant decrease in molecular weights, (2) growth in a powdered Biomax^® medium, compared with a control without powdered Biomax^®, and (3) production of terephthalate in a powdered Biomax^® medium. In this way, we concluded that these bacteria were useful for degradation of thermostable Biomax^® products.     

Geographical genetic structure and phylogeography of the <Emphasis Type="Italic">Sargassum horneri</Emphasis>/<Emphasis Type="Italic">filicinum</Emphasis> complex in Japan,based on the mitochondrial <Emphasis Type="Italic">cox3</Emphasis> haplotype

The genetic structure and phylogeography of the brown seaweed Sargassum horneri/filicinum complex in Japan were studied based on the mitochondrial cox3 haplotype. The cox3 haplotypes found were divided into three clades in a statistical parsimony network, among which there were large numbers of steps. Contrary to the reported large amount of drifting S. horneri along the Japanese coast, the three clades were dividedly distributed on the Japanese coast: the northern Pacific, the central Pacific, and western Japan. The western Japan S. horneri had haplotypes that were phylogenetically closer to those of S. filicinum than to the northern and central Pacific S. horneri populations. The S. filicinum populations were included within the western Japan clade and grouped together with the S. horneri samples from western Japan. Taken together with the unstable morphological diagnosis, this result suggests that S. filicinum should be reduced into a synonymy of S. horneri. The TMRCA analysis suggested that the divergence time of each clade may go back to the last interglacial period and a skyline plot suggested that the last glacial maximum had only a small effect on the population size of S. horneri. The geographic subdivision of the three groups, in spite of a large amount of drifting mats, suggests a limited contribution of drifting mats to gene flow on a large geographic scale. On a small geographic scale, a small number of haplotypes were shared between S. horneri-type and S. filicinum-type populations. This result suggests that populations of these two types are partially, though not completely, isolated from each other, possibly by selfing in S. filicinum-type populations or by a difference in peak reproduction.     

Reduction of natural resource consumption in cement production in Japan by waste utilization

According to Japanese government policy, the input of natural resources should be minimized and input resources should be utilized to the greatest extent possible so that, eventually, minimum waste is generated. The cement industry of Japan has worked hard to maximize waste utilization. Focusing on the cumulative amounts of the elements needed for clinker and gross calorific values, this study estimated the extent to which waste utilization has directly or indirectly reduced natural resource consumption and greenhouse gas emissions associated with cement production at 32 factories in Japan and clarified the effect of waste utilization in the cement industry on the resource productivity of Japan based on information for fiscal year 2008. Had no wastes been utilized, the cement industry consumption of limestone would have been 18% higher; of clay, 2,899% higher; and of energy, 22% higher. The utilization of wastes in the mixing and burning process of cement production directly reduced greenhouse gas emissions (12% emitted gas reduction) by a larger amount than the indirect reduction achieved by their utilization during the admixing process (10% reduction). Waste utilization for cement production contributed to an increase in resource productivity of about 8,000 Japanese Yen/ton.