Leaching Characteristics of Fly Ash from Thermal Power Plants of Soma and Tunçbilek, Turkey

Use of lignite in power generation has led to increasing environmental problems associated not only with gaseous emissions but also with the disposal of ash residues. In particular, use of low quality coal with high ash content results in huge quantities of fly ash to be disposed of. The main problem related to fly ash disposal is the heavy metal content of the residue. In this regard, experimental results of numerous studies indicate that toxic trace metals may leach when fly ash contacts water. In this study, fly ash samples obtained from thermal power plants, namely Soma and Tunçbilek, located at the west part of Turkey, were subjected to toxicity tests such as European Committee for standardization (CEN) and toxicity characteristic leaching (TCLP) procedures of the U.S. Environmental Protection Agency (U.S. EPA). The geochemical composition of the tested ash samples from the power plant show variations depending on the coal burned in the plants. Furthermore, the CEN and TCLP extraction results showed variations such that the ash samples were classified as `toxic waste' based on TCLP result whereas they were classified as `non-toxic' wastes based on CEN results, indicating test results are pH dependent.     

The role of endogenous nitric oxide in melatonin-improved tolerance to lead toxicity in maize plants

Melatonin (MT) and nitric oxide (NO) are known as scavengers of free radicals and an antioxidant against biotic and abiotic stresses in plant defense systems. However, whether NO interplays role in MT-induced antioxidant defense remains to be determined in the plants exposed to lead (Pb) toxicity. So, two experiments were designed to evaluate the role of NO in MT-mediated tolerance of maize plants to Pb stress. In the initial experiment, prior to starting different treatments, a solution of 0.05- or 0.10-mM MT was sprayed every other day for a period of 10 days to the leaves of maize plants exposed to Pb stress (0.1-mM PbCl₂). Pb toxicity significantly caused reduction in plant biomass (both fresh and dry), PSII maximum efficiency (F_v/F_m), total chlorophyll, leaf potassium (K), calcium (Ca), and leaf water potential, but it resulted in increased levels of proline, hydrogen peroxide (H₂O₂), malondialdehyde (MDA), electron leakage (EL), leaf Pb, and endogenous NO. An addition experiment was set up to further understand whether NO played role in mitigation of Pb toxicity in maize plants by MT using scavengers of NO and cPTIO combined with the MT treatments. MT-induced tolerance to Pb toxicity was totally eliminated by cPTIO by reversing endogenous NO. The present results clearly indicated that MT mediated the endogenous NO to improve tolerance of maize plants to Pb toxicity. This evidence was also supported by the increases of H₂O₂ and MDA and reduces some antioxidant enzyme activities tested as well as the plant growth inhibition and increased leaf Pb content by application of MT combined with cPTIO.

     

Preparation, Thermal Properties and Thermal Reliability of Form-Stable Paraffin/Polypropylene Composite for Thermal Energy Storage

This study is focused on the preparation, characterization, and determination of thermal properties and thermal reliability of paraffin/polypropylene (PP) composite as a novel form-stable phase change material (PCM) for thermal energy storage applications. In the composite, paraffin acts as a PCM when PP is operated as supporting material. The composites prepared at different mass fractions of paraffin (50, 60, 70, 80, and 90 w/w%) by solution casting method were subjected to leakage test by heating the composites over the melting temperature of the PCM. The paraffin/PP composite (70/30 w/w%) is found as the maximum paraffin containing composite and was characterized using Fourier transform infrared spectroscopy, optic microscopy, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA) techniques. DSC analysis indicated that the form-stable paraffin/PP composite melts at 44.77–45.52 °C and crystallizes at 53.55–54.80 °C. It has latent heats of 136.16 and −136.59 J/g for melting and crystallization, respectively. These thermal properties make it potential PCM for latent heat thermal energy storage (LHTES) purposes such as solar space heating applications. Accelerated thermal cycling tests indicated that the form-stable PCM had good thermal reliability. TGA also showed that the form-stable PCM degrades in two distinguishable steps and had good chemical stability.     

A criticism of applications with multi-criteria decision analysis that are used for the site selection for the disposal of municipal solid wastes

The main aim of this study is to criticize the process of selecting the most appropriate site for the disposal of municipal solid wastes which is one of the problematic issues of waste management operations. These kinds of problems are pathological symptoms of existing problematical human–nature relationship which is related to the syndrome called ecological crisis. In this regard, solving the site selection problem, which is just a small part of a larger entity, for the good of ecological rationality and social justice is only possible by founding a new and extensive type of human–nature relationship. In this study, as a problematic point regarding the discussions on ecological problems, the existing structure of the applications using multi-criteria decision analysis in the process of site selection with three main criteria is criticized. Based on this critique, fundamental problematic points (to which applications are insufficient to find solutions) will be defined. Later, some modifications will be suggested in order to provide solutions to these problematical points. Finally, the criticism addressed to the structure of the method with three main criteria and the feasibility of the new method with four main criteria is subjected to an evaluation process. As a result, it is emphasized that the new structure with four main criteria may be effective in solution of the fundamental problematic points.     

Siting a municipal solid waste disposal facility,Part II: The effects of external criteria on the final decision

The procedure of a multi-criteria decision analysis supported by the geographic information systems was applied to the site selection process of a planning municipal solid waste management practice based on twelve different scenarios. The scenarios included two different decision tree modes and two different weighting models for three different area requirements. The suitability rankings of the suitable sites obtained from the application of the decision procedure for the scenarios were assessed by a factorial experimental design concerning the effect of some external criteria on the final decision of the site selection process. The external criteria used in the factorial experimental design were defined as “Risk perception and approval of stakeholders” and “Visibility”. The effects of the presence of these criteria in the decision trees were evaluated in detail. For a quantitative expression of the differentiations observed in the suitability rankings, the ranking data were subjected to ANOVA test after a normalization process. Then the results of these tests were evaluated by Tukey test to measure the effects of external criteria on the final decision. The results of Tukey tests indicated that the involvement of the external criteria into the decision trees produced statistically meaningful differentiations in the suitability rankings. Since the external criteria could cause considerable external costs during the operation of the disposal facilities, the presence of these criteria in the decision tree in addition to the other criteria related to environmental and legislative requisites could prevent subsequent external costs in the first place.

Implications:

An experimental design was applied to a siting process based on different scenarios. The suitability rankings of suitable sites were obtained for each scenario. The external criteria used in the design were defined as perception and visibility. The presence of the external criteria produced meaningful differentiations. Two widespread persuasions about site selection were disproved using the results.     

Concentrations of cadmium and lead heavy metals in Dardanelles seawater

Cadmium and lead were determined simultaneously in seawater by differential pulse stripping voltammetry (DPSV) preceded by adsoptive collection of complexes with 8-hydroxyquinoline (oxine) on to a hanging mercury drop electrode (HMDE). In preliminary experiments the optimal analytical condition for oxine concentration was found to be 2.10⁻⁵ M, at pH 7.7, the accumulation potential was −1.1 V, and the initial scannig potential was −0.8 V. The peak potentials were found −0.652 V for Cd and −0.463 V for Pb At the 60 s accumalation time. The limit of detection (LOD) and limit of quantitatification (LOQ) were found to be by voltammetry as 0.588 and 1.959 μg l⁻¹ (RSD, 5.50%) for Cd and 0.931 and 3.104 μg l⁻¹ (RSD, 4.10%) for Pb at 60 s stirred accumulation time respectively. In these conditions the most of the seawater samples are amenable for direct voltammetric determination of cadmium and lead using a HMDE. An adsorptive stripping mechanism of the electrode reaction was proposed. For the comparison, seawater samples were also analysed by ICP-atomic emission spectrometry method (ICP-AES). The applied voltammetric technique was validated and good recoveries were obtained.     

Earthworm Aporrectodea molleri (oligochaeta)’s coelomic fluid-associated bacteria modify soil biochemical properties and improve maize (Zea mays L.) plant growth under abiotic stress conditions

Environmental Science and Pollution Research - This study evaluated the impact of Aporrectodea molleri's coelomic fluid-associated bacteria (CFB) on Zea mays L. growth and soil biochemical...     

Comparison of chemical composition of the essential oil of Laurus nobilis L. leaves and fruits from different regions of Hatay, Turkey

The essential oils of the leaves and fruits from bay (Laurus nobilis L.) grown in Antakya, Yayladagi and Samandagi were isolated by solvent extraction and analysed by capillary gas chromatography (GC), gas chromatography and mass spectrometry (GC/MS). In Antakya, Yayladagi and Samandagi the chemical compositions of the fruits and leaves were similar according to qualitative and quantitative analysis. Although in both fruits and leaves the major component was found to be 1.8-Cineole a concentration of about 50% compared with essential oils. The composition of the essential oil from the leaves has high content of 1.8-Cineole, Sabinene and alpha-Terpinyl acetate, but a low content of a-Pinene, alpha-Phellandrene and trans-/beta-osimen. 1.8-Cineole was found major component of the leaves essential oil collected from Samandagi (59.94%) which is sea coast of region. Interestingly alpha-Pinene, beta-Pinene, alpha-Phellandrene, 1.8-Cineole and trans-beta-osimen were found the major components of fruits of Laurus nobilis L. harvested from Antakya, Yayladagi and Samandagi Trans-beta-osimen was detected as the major component of fruits essential oil collected again from Samandagi (28.35%)     

Effects of farmyard manure and chemical fertilizers on the nutritional status of the loquat trees

The nutritional status of the loquat trees was investigated using cattle manure and commercial fertilizers for three years. The farmyard manure increased N, P, K, Mg, Fe and Zn contents of the leaves. No significant difference was found between the fertilizer types for trunk growth. Yield efficiency was nearly doubled by application of farmyard manure. Fertilizers did not affect the weight and shape of the fruits; however, commercial fertilizers led the lower total acidity in fruits. It was concluded that the loquat trees grown in sandy soils could fulfill their principal nutrient requirements for growth and commercial yield with application of farmyard manure.