Enzymatic degradation of poly([R,S] β-hydroxybutyrate)

The synthetic analogue of a bacterially produced polyester, poly(-hydroxybutyrate) (PHB) was synthesized from racemic -butyrolactone using anin situ trimethyl aluminum-water catalyst. The polymer was fractionated into samples differing in molecular weight and isotactic diad content. The latter was closely related to degree of crystallinity. The biodegradation of these fractions were examined by monitoring mass loss over time in the presence of anAlcaligenes faecalis T1 extracellular bacterial poly(-hydroxybutyrate) depolymerase. The fraction with high isotactic diad tacticity content showed little or no degradation over a 50 hour incubation period, whereas the fraction of intermediate isotactic diad content degraded in a continuous steady fashion at a rate that was less than that for bacterial PHB. The low isotactic diad fraction underwent a rapid initial degradation, followed by no further mass loss. The presence of stereoblocks in the polymer structure of the various fractions was an influence on the degree of susceptibility towards degradation and is related to sample crystallinity.     

Liquefaction process for a hydrothermally treated waste mixture containing plastics

Most landfilled plastic waste is a mixture or is in the form of composites with incombustible wastes such as glass, metals, and ceramics. After hydrothermal treatment, including a steam-explosion process, the separation of mixed waste (MW) into organic and inorganic substances becomes easy. However, the effect of hydrothermal pretreatment on the subsequent liquefaction of organic substances from MW is not obvious. In this study, the effects on the liquefaction of polystyrene and high-density polyethylene are discussed. Moreover, optimum conditions for the liquefaction of organic substances from hydrothermally treated MW are identified. By means of this hydrothermal pretreatment, including the steam-explosion process, polystyrene and high-density polyethylene can be significantly converted to oil by liquefaction at 300°–400°C. In comparison with liquefaction of hydrothermally pretreated mixed waste (HMW) at 300°–400°C with a batch type reactor, the yield of oil increases significantly on liquefaction using a semi-batch type reactor. It is considered that the radical chain and termination reactions among the radicals from HMW were inhibited in the semi-batch type reactor. On liquefaction of HMW in a semi-batch reactor, the conversion of HMW to oil was enhanced on increasing the liquefaction temperature to 350°C and the holding time to 60 min. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

沈阳市降雪中PFOS和PFOA污染现状调查

通过调查降雪中PFOS和PFOA的浓度,阐明了沈阳市大气中PFOS和PFOA的污染状况和污染规律.2006-02-06采集沈阳市区和郊区共计36个采样点的降雪样品,2006-02-25在其中5个采样点再次采集降雪样品.固相萃取融雪水中的PFOS和PFOA,利用LC-MS-SIM法测定样品中PFOS和PFOA浓度.全部样品中均检出PFOS和PFOA.2006-02-06降雪中PFOS和PFOA的浓度几何平均值分别为2.0 ng·L^-1（范围：0.4～46.2 ng·L^-1）和3.6 ng·L^-1（范围：1.6～22.4 ng·L^-1）,95%置信区间分别为1.5～2.8 ng·L^-1和3.1～4.2 ng·L^-1.PFOS和PFOA的最高浓度同时出现在郊区采样点朱尔屯,市中心区2种物质的浓度呈显著正相关.2006-02-25的5个采样点降雪中PFOS和PFOA的浓度几何平均值均为2.2 ng·L^-1.2次降雪中PFOS浓度差异不显著,2006-02-25降雪中PFOA浓度高于2006-02-06.结果表明,沈阳市区和郊区降雪中广泛存在PFOS和PFOA污染,局部区域可能存在共同的PFOS和PFOA污染来源;沈阳地区有较稳定的PFOS来源持续向大气中输送该类物质;PFOS和PFOA的环境行为可能不同.     

Spatial distribution and loading amounts of particle sorbed and dissolved perfluorinated compounds in the basin of Tokyo Bay

In this study, we analyzed over 30 types of PFCs, including precursors in both the dissolved phase and particle solid phase, in 50 samples of river water collected from throughout the Tokyo Bay basin. PFCs were detected in suspended solids (SSs) at levels ranging from <0.003-4.4 ng L(-1) (0.11-2470 ng g(-1) dry weight). The concentrations of PFCs in the SS were one to two order(s) of magnitude lower than those of PFCs in the dissolved phase. Relatively high levels of PFCs (total of 35 PFCs) in SS were observed in urbanized areas. The concentration of PFCAs, including PFOA and PFNA, were significantly correlated with the geographic index as artificial area (R(2) of the linear regression curve in a double logarithmic plot: 0.09-0.55). Conversely, PFOS and FOSA were significantly correlated with the arterial traffic area (R(2) in a double logarithmic plot: 0.29-0.55). Those spatial trends were similar to the trends in dissolved PFCs. We estimated the loading amount of PFCs into Tokyo Bay from six main rivers and found that more than 90% of the total PFCs reached Tokyo Bay in the dissolved phase. However, 40.0-83.5% of the long chain PFCAs (C12-C15), were transported as particle sorbed PFCs. Rain runoff events might increase the loading amount of PFCs in SS. Overall, the results presented herein indicate that greater attention should be given to PFCs, especially for longer chain PFCs in SS in addition to dissolved PFCs.     

Initial design process of the sustainability science ontology for knowledge-sharing to support co-deliberation

Implementation of the sustainability science (SS) approach is often difficult because of poor communication between experts from different academic fields. We focused on ontology engineering as a method of knowledge structuring that supports the co-deliberation process. However, SS is too broad for a few experts to construct an ontology because SS targets and covers almost all existing research fields from the viewpoint of problem-solving. The N-iteration process is required for completing an SS ontology. In the present paper, we discuss the initial design process for constructing an ontology on SS from the aspect of a knowledge-sharing tool to support co-deliberation. First, we identified the SS ontology by referring to the existing literature. Second, we traced the structuring process of the SS ontology, which is independent of the existing research domain. Third, we compared the SS ontology with existing ontologies or concept structures on SS. Fourth, we assessed the SS ontology produced in the initial process in terms of relevance and coverage and addressed areas for improvement in order to facilitate co-deliberation among researchers from different domains. As a result of developing the SS ontology and applying it to the mapping tool that we developed based on the ontology, we found the following three points: the SS ontology enables us to define concepts relevant to SS without overlapping by distinguishing part-of and attribute-of relationships at the upper level of the ontology; the SS-based mapping tool successfully represents the potential countermeasures required by the targeted problem for all scientific fields except experimental engineering; however, the SS ontology requires further improvement in order to represent the conceptual linkage arising from compound and secondary problems and the fulfillment of classes at the lower hierarchy of Shortage problem, and requires slots for the entire hierarchy. In addition, based on the discussion of the areas for improvement, we found that missing slots and classes should be added in the process in which we use or improve tools corresponding to a variety of requirements for supporting co-deliberation. In this way, we are able to propose an incremental process for constructing the SS ontology from the aspect of a knowledge-sharing tool to support co-deliberation.     

Photodegradation of gaseous acetaldehyde and methylene blue in aqueous solution with titanium dioxide-loaded activated carbon fiber polymer materials and aquatic plant ecotoxicity tests

TiO₂-supported activated carbon felts (TiO₂–ACFTs) were prepared by dip coating of felts composed of activated carbon fibers (ACFs) with either polyester fibers (PS-A20) and/or a polyethylene pulp (PE-W15) in a TiO₂ aqueous suspension followed by calcination at 250 °C for 1 h. The as-prepared TiO₂–ACFTs with 29–35 wt.% TiO₂ were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and N₂ adsorption. The TiO₂–ACFT(PS-A20) samples with 0 and 29 wt.% TiO₂ were microporous with specific surface areas (S _BET) of 996 and 738 m²/g, respectively, whereas the TiO₂–ACFT(PE-W15) samples with 0 and 35 wt.% TiO₂ were mesoporous with S _BET of 826 and 586 m²/g, respectively. Adsorption and photocatalytic activity of the as-prepared samples were evaluated by measuring adsorption in the dark and photodegradation of gaseous acetaldehyde (AcH) and methylene blue (MB) in aqueous solution under UV light. The TiO₂ loading caused a considerable decrease in the S _BET and MB adsorption capacity along with an increase in MB photodegradation and AcH mineralization. Lemna minor was chosen as a representative aquatic plant for ecotoxicity tests measuring detoxification of water obtained from the MB photodegradation reaction with the TiO₂–ACFT samples under UV light.     

Perfluorosulfonates and perfluorocarboxylates in snow and rain in Dalian,China

Samples of precipitation events (snow and rain) in Dalian, a typical coastal town in China, were analyzed for perfluorosulfonates (PFSAs) and perfluorocarboxylates (PFCAs) to investigate atmospheric contamination by these compounds. In the snow event on December 16, 2006, samples were collected from 21 different sites and in another 6 precipitation events, samples were collected from a single location. Four PFSAs (C4, C6, C8, C10) and seven PFCAs (C6–12) were analyzed. Among the homologues, perfluorooctane sulfonate (PFOS) concentrations were the highest with a geometric mean (GM) of 145 ng/L (n = 21) during the snow event on December 16, 2006, followed by perfluorooctanoate (PFOA) with a GM of 24.7 ng/L (n = 21). Concentrations of perfluorobutane sulfonate (PFBS), perfluorohexane sulfonate (PFHxS) and perfluoroheptanoate (PFHpA) were more than two orders of magnitude lower than that of PFOS. Other PFSAs and PFCAs were found to be below the limit of detection in all the samples. In other 6 precipitation events, PFSAs and PFCAs were detected approximately in the same order of magnitude in both snow and rain. The results indicate that wet deposition may be a potential transport mechanism of perfluorinated chemicals in the environment.     

Purification and characterization of extracellular poly(3-hydroxybutyrate) depolymerases

Five extracellular PHB depolymerases of bacteria isolated from various sources were purified to electrophoretic homogeneity and compared with known extracellular PHB depolymerase fromAlcaligenes faecalis T1. The molecular mass of these enzymes were all around 40–50 kDa. Nonionic detergent, diisopropylfluorophosphate and dithiothreitol inhibited the PHB depolymerase activity of all these enzymes. Trypsin abolished PHB depolymerase activity, but not theD-3-hydroxybutyric acid dimer hydrolase activity of all the enzymes. These results showed that the basic properties of these PHB depolymerases resemble those of theA. faecalis T1 enzyme. Analysis ofN-terminal amino acid sequence of the purified enzymes revealed that these enzymes includingA. faecalis T1 enzyme fall into three groups.     

Respiratory tract retention of inhaled air pollutants: Report 1 : Mercury absorption by inhaling through the nose and expiring through the mouth at various concentrations

To study atmospheric mercury absorption in human respiratory passage-ways, mercury in expired air was measured in three different states of breathing: steady breathing, deep breathing and breath held after inspiration.In this study, air containing mercury was inhaled through the nose and expired through the mouth. The concentration of mercury in the exhaled air was determined by the technique of gold-amalgam trapping, heat vaporization, and flameless atomic absorption measurement.The subjects were 13 male adults, aged 25–62 years, and 38 cases were observed. Four different concentrations of mercury, 1–3, 4–6, 10–11, and 20–30 μg/m³ were used, and absorption for each was determined. When the concentration was 1–3 μg/m₃, the absorption was 74–92%, the average being 82.5%. At concentrations of 4–6, 10–11, and 20–30 μg/m₃, the absorption was 76.6–100%, 75.5–99.2%, and 79.9–95.9% respectively, and the average was 88.8%, 85.2%, and 87.7% respectively.A slightly higher rate of mercury absorption was observed in deep breathing than in steady breathing, and when expiration was suppressed for some time after inspiration, the rate increased remarkably to 97.4–99.7%. Prolonged retention of inhaled air containing mercury in the respiratory tract is believed to have caused the increased absorption.