Analysis of waste management issues arising from a field study evaluating decontamination of a biological agent from a building

The Bio-response Operational Testing and Evaluation (BOTE) Project was a cross-government effort designed to operationally test and evaluate a response to a biological incident (release of Bacillus anthracis [Ba] spores, the causative agent for anthrax) from initial public health and law enforcement response through environmental remediation. The BOTE Project was designed to address site remediation after the release of a Ba simulant, Bacillus atrophaeus spp. globigii (Bg), within a facility, drawing upon recent advances in the biological sampling and decontamination areas. A key component of response to a biological contamination incident is the proper management of wastes and residues, which is woven throughout all response activities. Waste is generated throughout the response and includes items like sampling media packaging materials, discarded personal protective equipment, items removed from the facility either prior to or following decontamination, aqueous waste streams, and materials generated through the application of decontamination technologies. The amount of residual contaminating agent will impact the available disposal pathways and waste management costs. Waste management is an integral part of the decontamination process and should be included through “Pre-Incident” response planning. Overall, the pH-adjusted bleach decontamination process generated the most waste from the decontamination efforts, and fumigation with chlorine dioxide generated the least waste. A majority of the solid waste generated during pH-adjusted bleach decontamination was the nonporous surfaces that were removed, bagged, decontaminated ex situ, and treated as waste. The waste during the two fumigation rounds of the BOTE Project was associated mainly with sampling activities. Waste management activities may represent a significant contribution to the overall cost of the response/recovery operation. This paper addresses the waste management activities for the BOTE field test.Implications: Management of waste is a critical element of activities dealing with remediation of buildings and outdoor areas following a biological contamination incident. Waste management must be integrated into the overall remediation process, along with sampling, decontamination, resource management, and other important response elements, rather than being a stand-alone activity. The results presented in this paper will provide decision makers and emergency planners at the federal/state/tribal/local level information that can be used to integrate waste management into an overall systems approach to planning and response activities.     

Evaluation of Tire-Derived Fuel for Use in Nitrogen Oxide Reduction by Reburning

ABSTRACT

Tire-derived fuel (TDF) was tested in a small-scale (44 kW or 150,000 Btu/hr) combustor to determine its feasibility as a fuel for use in reburning for control of nitrogen oxide (NO). TDF was gravity-fed into upward flowing combustion gases from a primary natural gas flame doped with ammonia to simulate a high NO combustion process. Emissions of NO, oxygen, carbon dioxide, carbon monoxide, and particulate matter were measured. The tests varied the nominal primary NO level from 600 to 1,200 ppm and the primary stoichiometry from 1.1 to 1.2, and used both natural gas and TDF as reburn fuels. The reburn injection rate was varied to achieve 8–20% of the total heat input from the reburn fuel. NO emissions reductions ranged between 20 and 63% when using TDF, depending upon the rate of TDF injection, primary NO, and primary stoichiometry. NO emission reductions when using natural gas as the reburn fuel were consistently higher than those when using TDF. While additional work remains to optimize the process and evaluate costs, TDF has been shown to have the potential to be a technically viable reburning fuel.     

Variables affecting emissions of PCDD/Fs from uncontrolled combustion of household waste in barrels

The uncontrolled burning of household waste in barrels has recently been implicated as a major source of airborne emissions of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). A detailed, systematic study to understand the variables affecting emissions of PCDD/Fs from burn barrels was performed. The waste composition, fullness of the barrel, and the combustion conditions within the barrel all contribute significantly to determining the emissions of PCDD/Fs from burn barrels. The study found no statistically significant effect on emissions from the Cl content of waste except at high levels, which are not representative of typical household waste. At these elevated Cl concentrations, the impact of Cl on PCDD/F emissions was found to be independent of the form of the Cl (inorganic or organic). For typical burn conditions, most of the PCDD/F emissions appear to be associated with the later stages of the burn when the waste is smoldering. Polychlorinated biphenyls (PCBs) were also measured for a subset of the tests. For the nominal waste composition, the average emissions were 76.8 ng toxic equivalency units (TEQ)WHO98/kg of waste combusted, which suggests that uncontrolled burning of household waste could be a major source of airborne PCDD/Fs in the United States.     

Climate change collaboration among natural resource management agencies: lessons learned from two US regions

It has been argued that regional collaboration can facilitate adaptation to climate change impacts through integrated planning and management. In an attempt to understand the underlying institutional factors that either support or contest this assumption, this paper explores the institutional factors influencing adaptation to climate change at the regional scale, where multiple public land and natural resource management jurisdictions are involved. Insights from two mid-western US case studies reveal that several challenges to collaboration persist and prevent fully integrative multi-jurisdictional adaptation planning at a regional scale. We propose that some of these challenges, such as lack of adequate time, funding and communication channels, be reframed as opportunities to build interdependence, identify issue-linkages and collaboratively explore the nature and extent of organisational trade-offs with respect to regional climate change adaptation efforts. Such a reframing can better facilitate multi-jurisdictional adaptation planning and management of shared biophysical resources generally while simultaneously enhancing organisational capacity to mitigate negative effects and take advantage of potentially favourable future conditions in an era characterised by rapid climate change.     

Simulation of groundwater age evolution during the Wisconsinian glaciation over the Canadian landscape

The simulation of groundwater age (residence time) is used to study the impact of the Wisconsinian glaciation on the Canadian continental groundwater flow system. Key processes related to coupled groundwater flow and glaciation modeling are included in the model such as density-dependent flow, hydromechanical loading, subglacial infiltration, glacial isostasy, and permafrost development. It is found that mean groundwater ages span over a large range in values, between zero and 42 Myr; exceedingly old groundwater is found at large depths where there is little groundwater flow because of low permeabilities and because of the presence of very dense brines. During the glacial cycle, old, deep groundwater below the ice sheet mixes with the young subglacial meltwater that infiltrates into the subsurface; the water displacement due to subglacial recharge reaches depths up to 3 km. The depth of penetration of the meltwater is, however, strongly dependent on the permeability of the subsurface rocks, the presence of dense brines and the presence or absence on deep fractures or conductive faults. At the end of the simulation period, it was found that the mean groundwater age in regions affected by the ice sheet advance and retreat is younger than it was at the last interglacial period. This is also true for frozen groundwater in the permafrost area and suggests that significant parts of this water is of glacial origin. Finally, the simulation of groundwater age offers an alternative and pragmatic framework to understand groundwater flow during the Pleistocene and for paleo-hydrogeological studies because it records the history of the groundwater flow paths.     

Nano-silver in drinking water and drinking water sources: stability and influences on disinfection by-product formation

Nano-silver is increasingly used in consumer products from washing machines and refrigerators to devices marketed for the disinfection of drinking water or recreational water. The nano-silver in these products may be released, ending up in surface water bodies which may be used as drinking water sources. Little information is available about the stability of the nano-silver in sources of drinking water, its fate during drinking water disinfection processes, and its interaction with disinfection agents and disinfection by-products (DBPs). This study aims to investigate the stability of nano-silver in drinking water sources and in the finished drinking water when chlorine and chloramines are used for disinfection and to observe changes in the composition of DBPs formed when nano-silver is present in the source water. A dispersion of nano-silver particles (10 nm; PVP-coated) was used to spike untreated Ottawa River water, treated Ottawa River water, organic-free water, and a groundwater at concentrations of 5 mg/L. The diluted dispersions were kept under stirred and non-stirred conditions for up to 9 months and analyzed weekly using UV absorption to assess the stability of the nano-silver particles. In a separate experiment, Ottawa River water containing nano-silver particles (at 0.1 and 1 mg/L concentration, respectively) was disinfected by adding sodium hypochlorite (a chlorinating agent) in sufficient amounts to maintain a free chlorine residual of approximately 0.4 mg/L after 24 h. The disinfected drinking water was then quenched with ascorbic acid and analyzed for 34 neutral DBPs (trihalomethanes, haloacetonitriles, haloacetaldehydes, 1,1 dichloro-2-propanone, 1,1,1 trichloro-2-propanone, chloropicrin, and cyanogen chloride). The results were compared to the profile of DBPs obtained under the same conditions in the absence of nano-silver and in the presence of an equivalent concentration of Ag⁺ ions (as AgNO₃). The stability of the nano-silver dispersions in untreated Ottawa River water, with a dissolved organic carbon concentration of 6 mg/L, was significantly higher than the stability of the nano-silver dispersions in distilled, organic-free water. Nano-silver particles suspended in the groundwater agglomerated and were quickly and quantitatively removed from the solution. Our data confirm previous observations that natural dissolved organic matter stabilizes nano-silver particles, while the high-ionic strength of groundwater appears to favor their agglomeration and precipitation. As expected, nano-silver was not stable in Ottawa River water through the chlorination process, but survived for many days when added to the Ottawa River water after treatment with chlorine or chloramines. Stirring appeared to have minimal effect on nano-silver stability in untreated and treated Ottawa River water. The profile of DBPs formed in the presence of nAg differed significantly from the profile of DBPs formed in the absence of nAg only at the 1 mg/L nAg concentration. The differences observed consisted mainly in reduced formation of some brominated DBPs and a small increase in the formation of cyanogen chloride. The reduced formation of brominated congeners may be explained by the decrease in available bromide due to the presence of Ag⁺ ions. It should be noted that a concentration of 1 mg/L is significantly higher than nAg concentrations that would be expected to be present in surface waters, but these results could be significant for the disinfection of some wastewaters with comparably high nano-silver concentrations.     

Emissions from carpet combustion in a pilot-scale rotary kiln: comparison with coal and particle-board combustion

The use of post-consumer carpet as a potential fuel substitute in cement kilns and other high-temperature processes is being considered to address the problem of huge volumes of carpet waste and the opportunity of waste-to-energy recovery. Carpet represents a high volume waste stream, provides high energy value, and contains other recoverable materials for the production of cement. This research studied the emission characteristics of burning 0.46-kg charges of chopped nylon carpet squares, pulverized coal, and particle-board pellets in a pilot-scale natural gas-fired rotary kiln. Carpet was tested with different amounts of water added. Emissions of oxygen, carbon dioxide, nitric oxide (NO), sulfur dioxide (SO2), carbon monoxide (CO), and total hydrocarbons and temperatures were continuously monitored. It was found that carpet burned faster and more completely than coal and particle board, with a rapid volatile release that resulted in large and variable transient emission peaks. NO emissions from carpet combustion ranged from 0.06 to 0.15 g/MJ and were inversely related to CO emissions. Carpet combustion yielded higher NO emissions than coal and particle-board combustion, consistent with its higher nitrogen content. SO2 emissions were highest for coal combustion, consistent with its higher sulfur content than carpet or particle board. Adding water to carpet slowed its burn time and reduced variability in the emission transients, reducing the CO peak but increasing NO emissions. Results of this study indicate that carpet waste can be used as an effective alternative fuel, with the caveats that it might be necessary to wet carpet or chop it finely to avoid excessive transient puff emissions due to its high volatility compared with other solid fuels, and that controlled mixing of combustion air might be used to control NO emissions from nylon carpet.     

Pilot-scale studies on the effect of bromine addition on the emissions of chlorinated organic combustion by-products

The addition of brominated organic compounds to the feed of a pilot-scale incinerator burning chlorinated waste has been found previously, under some circumstances, to enhance emissions of volatile and semivolatile organic chlorinated products of incomplete combustion (PICs) including polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/Fs). This phenomenon appears to be sensitive to temperature and combustion conditions. This paper reports on a study to evaluate the emissions of organic combustion by-products while varying amounts of bromine (Br) and chlorine (Cl) are being fed into a pilot-scale incinerator burning surrogate waste materials. The surrogate waste was fed at a constant molar halogen input rate, with varying Br/Cl molar ratios. In these tests, an approximately 30% decrease in the total PCDD/F concentrations due to the addition of Br was observed. This decrease appears to be a decrease only in the chlorinated dioxin and furan species; other halogenated dioxins and furans were formed instead. PCDD/F homologue distribution shifted towards the higher chlorinated species. Perhalogenated or nearly perhalogenated mixed bromo-chloro furans were also observed in quantities that could potentially account for the observed decrease in PCDDs/Fs. This research illustrates the need for careful trial burn planning if Br will be present in the facility's feed-stock during normal operation.     

Synchronization of amniotic fluid cells for high resolution cytogenetics

A high resolution technique was applied to amniotic fluid cells by synchronization. After inoculation, the cells were incubated for 30 h in the presence of either thymidine or 5-bromodeoxyuridine (BrdU). After removal of the blocking agent and addition of a low concentration of thymidine, the cells were incubated for another 6 1/2–7 h, then harvested in prometaphase without colcemid. This technique gives a mitotic index of 3·7 per cent after thymidine synchronization and of 3·2 per cent after BrdU synchronization, and more than half of the mitoses were in the earlier phases with the chromosomes showing more than 550 bands per haploid set. GBG, GTG, and RHG prometaphases are presented. Precise high-resolution banding of chromosomes of amniotic fluid cells can increase diagnostic accuracy.     

Bench-scale studies on the simultaneous formation of PCBs and PCDD/Fs from combustion systems

The presence of endocrine disrupting chemicals (EDCs) in the environment has wide-ranging potential ecological and health impacts on animals and humans. A significant amount of experimental and theoretical work has been performed the examining formation and control of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs), which account for only part of the EDCs being emitted from combustion devices. Generally accepted mechanistic theories for PCDD/F formation propose heterogeneous reactions in the cooler regions of the combustor involving gas-phase organic precursors (such as chlorobenzenes or chlorophenols), a chlorine donor [such as hydrogen chloride (HCl)], and a flyash-bound metallic catalyst (such as copper chloride). There is evidence that some other proposed EDCs, including polychlorinated biphenyls (PCBs), are formed through a similar mechanistic pathway as PCDD/Fs. In addition, there is evidence that certain important steps in the catalytic reaction between the copper catalyst and the organic precursors may suggest a common rate limiting step for the heterogeneous formation of the previously mentioned EDCs. This paper reports on a bench-scale experimental study to characterize a newly built reactor system that was built to: produce levels and distributions of PCDD/F production similar to those achieved by previous researchers; verify similar responses to changes in independent variables; examine the hypothesis that PCB formation rates exhibit trends similar to PCDD/F formation rates as reactor variables are changed; and begin to explore the dependence of PCB formation on temperature and precursor type. The reactor system has been built, and initial reactor characterization studies have been performed. Initial experiments yielded results that support the hypothesis of a similar formation mechanism of PCBs and PCDD/Fs in combustors. Initial experiments uncovered potential deficiencies with the reactor system and the experimental procedures and have suggested corrective action to improve the experimental system.