Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Concentration of heavy metals in various children's herbal tea types and their correlations

This investigation was undertaken to determine the concentrations of cadmium, lead, mercury, zinc, copper and magnesium in six tea types used as children's tea. Six types of tea of different herbal composition used for children's consumption (T1, T2, T3, T4, T5 and T6) were analyzed in three subsequent collections. The analysis of cadmium showed that the concentration was very similar in all types of children's tea, ranging from 0.233 to 0.369 mg/kg. Lead concentrations were in the range of 0.340-1.564 mg/kg without any significant differences. The analysis of mercury detected very low concentration of this metal in all samples (0.002-0.004 mg/kg). In zinc, the values ranged from 36.633 to 71.711 mg/kg, with significant differences (p < 0.001) according to tea type. Copper concentration was 10.089-30.178 mg/kg with the highest value in T4. The concentration of magnesium was significantly higher in tea T1 and T2 (102.311 and 129.422 mg/kg) in comparison with other tea types where the level was 19.811-37.411 mg/kg. The maximum tolerable limit determined by Codex Alimentarius was not exceeded in any sample. In general, correlation analysis detected high positive correlation between cadmium and lead (r = 0.89), cadmium and mercury (r = 0.92) and between lead and mercury (r = 0.77).     

Anaerobic inhibition and biodegradation of antibiotics in ISO test schemes

Municipal sewage is the main exposure route for antibiotics that are used in human medical care. Antibiotics that adsorb to the primary sludge and/or sur-plus activated sludge will enter the anaerobic digesters of municipal sewage treatment plants. Here anaerobic biodegradation or inhibition of anaerobic bacteria resulting in a disturbance of the process might occur. ISO standards 13641 (2003) and 11734 (1999) were used for assessing the anaerobic inhibition of 16 and the anaerobic biodegradability of 9 antibiotics respectively. Digestion sludge from a municipal sewage treatment plant (1g/l d.s.) was used as inoculum in both tests. In ISO 13641 (2003) most antibiotics showed only moderate inhibition effects after a 7 day incubation period, with EC50 values between 24 mg/l and more than 1000 mg/l (equal to mg/g d.s.). In contrast, metronidazol was decisively toxic to anaerobic bacteria with an EC50 of 0.7 mg/l. In the anaerobic degradation tests according to ISO standard 11734 (1995), only benzylpenicillin showed certain ultimate biodegradation after 60 days and most antibiotics inhibited the digesting sludge in the respective parallel tested inhibition controls. Thus the inhibition of anaerobic bacteria by antibiotics observed in the degradation tests was higher than expected from the results of the inhibition tests. The possible explanations are that distinct substrates are used (yeast extract versus sodium benzoate), that the digestion sludge loses activity during the washing steps performed for the degradation tests and that the exposure time in the degradation tests was 8 times longer than in the inhibition test.     

Utilization of Waste Lignin and Hydrolysate From Chromium Tanned Waste in Blends of Hot-Melt Extruded PVA-Starch

The demand for biodegradable plastic material is increasing worldwide. However, the cost remains high in comparison with common forms of plastic. Requirements comprise low cost, good UV-stability and mechanical properties, as well as solubility and water uptake lead to the preparation of multi-component polymer blends based on polyvinyl alcohol and starch in combination with waste products that are hard to utilize—waste lignin and hydrolysate extracted from chromium tanned waste. Surprisingly the addition of such waste products into PVA gives rise to blends with better biodegradability than commercial PVA in an aquatic aerobic environment with non-adapted activated sludge. These blends also exhibited greater solubility in the water and UV stability than commercial PVA. Tests on the processing properties of the blends (melt flow index, tensile strength and elongation at break of the films) as well as their mechanical properties showed that materials based on these blends might be applied in agriculture (for example as the systems for controlled-release pesticide or fertilizer) and, somewhat, in the packaging sector.     

Mercury in fish tissues in the area of Malachov Hg-ore deposit (Slovakia)

Environmental Geochemistry and Health - The abandoned Malachov deposit belongs among the most important historic Hg deposits in the world. The soil, groundwater, surface water, plants, and animals...     

Aquivalence revisited--new model formulation and application to assess environmental fate of ionic pharmaceuticals in Hamilton Harbour, Lake Ontario

A model formulation based on "aquivalence", as defined in terms of activity is presented to estimate the multimedia fate of ionizing chemicals. The aquivalence approach is analogous to fugacity but aquivalence is applicable to neutral and ionizing compounds, and has been applied previously to speciating chemicals, notably metals. The new aquivalence-based mass-balance model treats ionizing organic compounds that exist as interconverting neutral and ionic species which are subject to fate processes at differing rates. The model is illustrated by application to four ionizing pharmaceuticals in Hamilton Harbour, Lake Ontario. At the system pH of 7.9-8.5, ibuprofen, gemfibrozil, and naproxen are expected to be almost entirely ionic and triclosan split between ionic and neutral forms. Measured seasonal surface water concentrations, which were 2-10 times lower in the late summer and fall than during spring, were used to solve for unknown values of chemical half-life in the water column due to degradation (photo- and bio-) of the ionizing and neutral forms and secondarily, ionic sorption coefficients of the ionizing forms. Model estimates of half-lives in the habour's water ranged from 11 to 77, 11 to 147 and 10 to 37 for ionic ibuprofen, gemfibrozil, and naproxen, respectively; and 4-22 days and 2-9 days for ionic and neutral triclosan, respectively, with the shortest half-lives in spring and the longest in summer.     

Influence of H2SO4 and ferric iron on Cd bioleaching from spent Ni–Cd batteries

The paper is concerned with biohydrometallurgical methods of cadmium recovery from spent Ni–Cd batteries. Cd leaching efficiency from electrode material in different media (H₂SO₄ and Fe₂(SO₄)₃ solutions), at different Fe(III) concentrations and using the bacteria Acidithiobacillus ferrooxidans were investigated. The main aim of this study was to understand which from the bioleaching products (sulphuric acid or ferric sulphate) play a main role in the bioleaching process of Cd recovery. The influence of Fe ions on Cd leachability was confirmed. The best leaching efficiency of Cd (100%) was reached by bioleaching and also by leaching in Fe₂(SO₄)₃ solution. The results of X-ray diffraction confirmed that no cadmium was present in solid residuum obtained after the Cd bioleaching as well as Cd leaching using solely ferric iron. The use of H₂SO₄ solution resulted in the lowest efficiency of Cd leachability, the presence of hydroxides in electrode materials caused neutralization of the leaching solution and inhibition of Cd leaching.     

Concentration of heavy metals in various children's herbal tea types and their correlations

This investigation was undertaken to determine the concentrations of cadmium, lead, mercury, zinc, copper and magnesium in six tea types used as children's tea. Six types of tea of different herbal composition used for children's consumption (T1, T2, T3, T4, T5 and T6) were analyzed in three subsequent collections. The analysis of cadmium showed that the concentration was very similar in all types of children's tea, ranging from 0.233 to 0.369 mg/kg. Lead concentrations were in the range of 0.340–1.564 mg/kg without any significant differences. The analysis of mercury detected very low concentration of this metal in all samples (0.002–0.004 mg/kg). In zinc, the values ranged from 36.633 to 71.711 mg/kg, with significant differences (p < 0.001) according to tea type. Copper concentration was 10.089–30.178 mg/kg with the highest value in T4. The concentration of magnesium was significantly higher in tea T1 and T2 (102.311 and 129.422 mg/kg) in comparison with other tea types where the level was 19.811–37.411 mg/kg. The maximum tolerable limit determined by Codex Alimentarius was not exceeded in any sample. In general, correlation analysis detected high positive correlation between cadmium and lead (r = 0.89), cadmium and mercury (r = 0.92) and between lead and mercury (r = 0.77).