Preparation of solar-enhanced AlZnO@carbon nano-substrates for remediation of textile wastewaters

Photoactive aluminum doped ZnO(AlZnO) was synthesized by sol-gel method.After that,AlZnO photocatalyst was deposited on five carbon-based materials(CBMs) using ultrasonic route followed by solid-state mixing using ball mill.The CBMs used were poly aniline(PANI),carbon nitride(CN),carbon nanotubes(CNT),graphene(G),and carbon nanofibers(CNF).The crystal phases,elemental compositions,morphological,and optical properties of the AlZnO@CBMs composites were investigated.Experimental results revealed that two of AlZnO@CBMs composites exhibited superior bleaching efficiency(100% removal) and photocatalytic stability(three cycles) for 50 μmol/L Methylene Blue(MB) contaminated water after 60 min irradiation in visible light at pH 6.5,0.7% H_2O_2,and 5 g/L inorganic salts.Under optimum conditions,AlZnO@CBMs nanocomposites were employed for the treatment of mixed dyestuffs composed of MB,Methyl Orange(MO),Astrazone Blue FRR(BB 69),and Rhodamine B(RhB) dyes under dark,ultraviolet,visible,and direct sunlight.For mixed dyestuffs,the AlZnO@G achieved the highest dye sorption capacity(60.91 μmol dye stuffs/g) with kinetic rate 8.22 × 10~(-3) min~(-1) in 90 min via multi-layer physisorption(Freundlich isotherm) on graphene sheet.In additions,AlZnO@CN offered the highest photo-kinetic rate(K_(photo)) of～54.1 × 10~(-3) min~(-1)(93.8% after 60 min) under direct sunlight.Furthermore,the selective radical trapping experiment confirmed that the holes and oxidative superoxide radicals are crucial on dyes photodegradation pathway.Owing to their superior performance,AlZnO@G and AlZnO@CN nanocomposites can offer an effective in-situ solar-assisted adsorption/photocatalytic remediation of textile wastewater effluents.     

Efficiency of Reovirus Concentration from Water with Positively Charged Filters

This study examined the efficacy of reovirus concentration from large volumes of water using two positively charged filters: Zeta Plus 1MDS and NanoCeram. The results indicated that an average of 61 and 81% of input reoviruses were effectively recovered, respectively, from recycled water and tap water using NanoCeram filtration.     

Fate of imidacloprid in soil and plant after application to cotton seeds

This study aimed to investigate the persistence of imidacloprid in soil after application to cotton seeds and to obtain a complete picture on the mass balance of this compound in soil and cotton plants. The study was carried out as a pot culture experiment under laboratory conditions using a Gaucho formulation containing ¹⁴C-labeled imidacloprid. Three treatments of cotton seeds were made in sandy loamy soil: live seeds grown in autoclaved soil, dead seeds put in live soil and live seeds grown in live soil. Results showed that total ¹⁴C recoveries decreased by time ranging 93.8–96.2, 77.1–88.4 and 53.5–62.4% of the applied radioactivity at 7, 14, and 21 d after application, respectively. The reduction in the extracted ¹⁴C from soil coincided with the increase of non-extracted ones. Levels of bound ¹⁴C was always less in autoclaved soil than in live ones. Results revealed also that only 1.8–6.8% of the applied ¹⁴C was taken up by the plants and fluctuated within the test period. ¹⁴C levels were higher in plants grown in autoclaved soil than those in live ones and the radioactivity tended to accumulate on the edges of cotton leaves. Most of the radioactivity in the soil extracts was identified as unchanged ¹⁴C-imidacloprid.     

Mesoporous hexagonal and cubic aluminosilica adsorbents for toxic nitroanilines from water

In the present study, ordered mesocage hexagonal P6mm and cubic Pm3n aluminosilica nanoadsorbents with monolith-like morphology and micro-, meso-, and macro-pores were fabricated using a simple, reproducible, direct synthesis. Our results suggest that the aluminosilica nanoadsorbents attained the ordering and uniform hexagonal and cubic pores even at the high Si/Al ratio of 4. The acidity of nanoadsorbents significantly based on the amount of aluminum species in the walls of the silica pore framework. Aluminosilica nanoadsorbents were used as a removal of environmentally toxic aromatic amines, namely p-nitroaniline (p-NA), from wastewater. The loading amount of Bronsted acid sites, mesostructural geometries, and multi-directional pores (3D) of the aluminosilica adsorbents played a key factor in the enhancement of the coverage adsorbent surfaces and intraparticle diffusion of adsorbate molecules onto the network surfaces and into the pore architectures of monoliths. Significantly, we developed theoretical models to explain the 3D microscopic geometry and the pore orientation of aluminosilica monoliths. A key component of the nanoadsorbents is the ability to create revisable p-NA adsorption systems with multiple reuse cycles. However, simple treatment using an acidic aqueous solution was found to remove effectively the p-NA and to form “p-NA-free” pore surfaces without any mesostructural damage.     

The response of industry to environmental regulations in Alexandria, Egypt

The response of industry to current environmental regulations in Alexandria, Egypt was investigated. Environmental officers in 55 industrial firms completed a questionnaire examining their opinions about current environmental regulations, the statuses of their companies' compliance with those regulations, and the environmental management progress and problems in their companies. Although Egyptian industrialists had positive opinions about environmental regulations, their companies were not in satisfactory compliance with those regulations. The context in which environmental concern started in Egypt and the economic environment of Egyptian industry had lead to 'soft' enforcement and implementation of environmental regulations. The response of Alexandria's industrial firms to the issued environmental regulations was limited to adopting symbolic 'end-of-pipe' environmental protection measures. Progress in environmental management and problems in industries of Alexandria were also investigated.     

Search and rescue in collapsed structures: engineering and social science aspects

This paper discusses the social science and engineering dimensions of search and rescue (SAR) in collapsed buildings. First, existing information is presented on factors that influence the behaviour of trapped victims, particularly human, physical, socioeconomic and circumstantial factors. Trapped victims are most often discussed in the context of structural collapse and injuries sustained. Most studies in this area focus on earthquakes as the type of disaster that produces the most extensive structural damage. Second, information is set out on the engineering aspects of urban search and rescue (USAR) in the United States, including the role of structural engineers in USAR operations, training and certification of structural specialists, and safety and general procedures. The use of computational simulation to link the engineering and social science aspects of USAR is discussed. This could supplement training of local SAR groups and USAR teams, allowing them to understand better the collapse process and how voids form in a rubble pile. A preliminary simulation tool developed for this purpose is described.     

Regional climate sensitivity of wetland environments in Rwanda: the need for a location-specific approach

Wetlands are sustaining large communities of people in Rwanda where 10 % of its land surface consists of many local wetlands. Sustainable future management of these numerous wetlands requires a reliable inventory of their location and a dynamic quantitative characterization that allows assessment of their climate change sensitivity. The aim of this study was to assess the importance of climatic factors for determining wetland location at different regional scales. Wetland locations were analyzed and statistically modeled using their location factors with logistic regression. Wetland location probability was determined using topographic (elevation, slope), hydrological (contributing area) and climatic (temperature and rainfall) location factors. A wetland location probability map was made that demonstrated a calibration accuracy of 87.9 % correct at national level compared to an existing inventory, displaying even better fits at subnational level (reaching up to 98 % correct). A validation accuracy of 86.2 % was obtained using an independently collected dataset. A sensitivity analysis was applied to the threshold values used as cutoff value between wetland/non-wetland, demonstrating a robust performance. The developed models were used in a sensitivity scenario analysis to assess future wetland location probability to changes in temperature and rainfall. In particular, wetlands in the central regions of Rwanda demonstrate a high sensitivity to changes in temperature (1 % increase causes a net probable wetland area decline by 12.4 %) and rainfall (+1 % causes a net increase by 1.6 %). This potentially significant impact on wetland number and location probability indicates that climate-sensitive future planning of wetland use is required in Rwanda.