H and O isotopic differences in typhon and urban-induced heavy rain in Tokyo

Stable isotope ratios of hydrogen and oxygen of water are useful tracers of the hydrological cycle. For example, isotopes monitor the evapotranspiration in vegetated areas, local snow ice processes and stream water flow processes. δ¹⁸O and δD in rainwater reflect the processes of evaporation, condensation and precipitation. Heavy rains thus modify the stable isotope ratio of ground water, stream water and transpiration water vapor. However, the controlling factors of δ¹⁸O and δD are not clear. Here we analyzed the inorganic ion concentration and stable isotope ratio in 38 normal rainwater and 15 heavy rainwater samples were collected in Shinjuku, Tokyo, Japan, during four years from October 2012 to December 2015. Results show a decrease in δ¹⁸O and δD values with the total rainfall amount, thus highlighting the amount effect. δ¹⁸O and δD volume-weighted mean values in typhoon heavy rain were higher than the values estimated from amount effect, whereas δ¹⁸O and δD volume-weighted mean values in urban-induced heavy rain were lower. Typhoon heavy rain has high Na⁺ ratio and stable isotope ratios, while urban-induced heavy rain has low Na⁺ ratio and stable isotope ratio.     

Initial design process of the sustainability science ontology for knowledge-sharing to support co-deliberation

Implementation of the sustainability science (SS) approach is often difficult because of poor communication between experts from different academic fields. We focused on ontology engineering as a method of knowledge structuring that supports the co-deliberation process. However, SS is too broad for a few experts to construct an ontology because SS targets and covers almost all existing research fields from the viewpoint of problem-solving. The N-iteration process is required for completing an SS ontology. In the present paper, we discuss the initial design process for constructing an ontology on SS from the aspect of a knowledge-sharing tool to support co-deliberation. First, we identified the SS ontology by referring to the existing literature. Second, we traced the structuring process of the SS ontology, which is independent of the existing research domain. Third, we compared the SS ontology with existing ontologies or concept structures on SS. Fourth, we assessed the SS ontology produced in the initial process in terms of relevance and coverage and addressed areas for improvement in order to facilitate co-deliberation among researchers from different domains. As a result of developing the SS ontology and applying it to the mapping tool that we developed based on the ontology, we found the following three points: the SS ontology enables us to define concepts relevant to SS without overlapping by distinguishing part-of and attribute-of relationships at the upper level of the ontology; the SS-based mapping tool successfully represents the potential countermeasures required by the targeted problem for all scientific fields except experimental engineering; however, the SS ontology requires further improvement in order to represent the conceptual linkage arising from compound and secondary problems and the fulfillment of classes at the lower hierarchy of Shortage problem, and requires slots for the entire hierarchy. In addition, based on the discussion of the areas for improvement, we found that missing slots and classes should be added in the process in which we use or improve tools corresponding to a variety of requirements for supporting co-deliberation. In this way, we are able to propose an incremental process for constructing the SS ontology from the aspect of a knowledge-sharing tool to support co-deliberation.     

Recovery of gold by chicken egg shell membrane-conjugated chitosan beads

We have successfully prepared a bead-type adsorbent from two materials with different adsorption characteristics. Heavy metals were removed by greatly swollen egg shell membrane-conjugated chitosan beads. The egg shell membrane accumulated and removed precious metal ions from a dilute aqueous solution with a high affinity in a short contact time. Experiments suggested that chitosan beads could take up gold ions with great capacity and selectivity by conjugation with egg shell membrane. Under certain conditions, the selective removal of gold and copper in a mixture of gold and copper ions by egg shell membrane-conjugated chitosan beads was 100% and 2%, respectively. Egg shell membrane-conjugated chitosan beads can be seen as a promising material to recover gold in wastewater from various industries, such as electroplating.     

Rare earth element recovery potentials from end-of-life hybrid electric vehicle components in 2010–2030

Increasing attention is currently given to the management of end-of-life (EoL) hybrid electric vehicles (HEVs), because approximately two decades have passed since they were first introduced to the market. A HEV would be one of the largest consumers of rare earth elements (REEs), and hence represents the greatest potential for REE recovery in the future. The purpose of this study is to clarify the present and future recovery potential of REEs that are disposed of as EoL HEVs. This study first estimated the numbers of EoL HEVs during fiscal years (FYs) 2010–2030, and then clarified the potential for recovery of REEs from two HEV-specific components—the hybrid transmission and NiMH battery unit. The results suggest that 0.51–0.65 million HEVs will reach the EoL stage in FY2030, compared with only 11,000 HEVs in FY2010. As of FY2030, REE recovery potentials will increase to 220 tons and 2900 tons for EoL hybrid transmission and NiMH battery units, respectively. A total of 49,000 tons of REEs will be contained within HEV-specific components of HEVs still in use. Moreover, the potential for recovery of REEs from EoL hybrid transmissions and NiMH battery units is estimated to equal 35.4 and 92.1 % of respective demand.     

Time series analysis for the estimation of tidal fluctuation effect on different aquifers in a small coastal area of Saijo plain, Ehime prefecture, Japan

Considering the current poor understanding of the seawater–freshwater (SW–FW) interaction pattern at dynamic hydro-geological boundary of coastal aquifers, this work strives to study tidal effect on groundwater quality using chemical tracers combined with environmental isotopes. In situ measurement data of electrical conductivity and groundwater level along with laboratory measurement data of hydro-chemical species were compared with tidal level data measured by Hydrographic and Oceanographic Department, Saijo City, Japan for time series analysis. Result shows that diurnal tides have significant effect on groundwater level as well as its chemical characteristics; however, the magnitude of effect is different in case of different aquifers. Various scatter diagrams were plotted in order to infer mechanisms responsible for water quality change with tidal phase, and results show that cations exchange, selective movement and local SW–FW mixing were likely to be the main processes responsible for water quality changes. It was also found that geological structure of the aquifers is the most important factor affecting the intensity of tidal effect on water quality.     

Strontium isotope constraints on the seasonal variation of the provenance of base cations in rain water at Kawakami, Central Japan

The ⁸⁷Sr/⁸⁶Sr ratios in monthly precipitation in the forested basin at Kawakami, central Japan, varied seasonally from 0.709 to 0.711 in spring to as low as 0.7062 ± 0.0004 in autumn over nine years from 1987 to 1995. The seasonal variation can be explained in terms of the mixing of three sources of Sr: sea salt (⁸⁷Sr/⁸⁶Sr 0.70917), soluble eolian minerals originating from deserts in continental Asia ( 0.711), and biogenic materials growing on soils derived from the volcanic rock substrates in the vicinity ( 0.706). It is estimated that the contribution of sea-salt Sr into the Kawakami rain Sr is relatively constant (10 ± 5%) and that more than half of the Sr is of biogenic origin throughout the year except during spring rains when 50% of the Sr is due to the dissolution of Ca-minerals from Asian dusts. The dominant contribution of eolian components to spring rains is consistent with the high concentration of ³H, which is typical of air masses from Asia.     

Toward knowledge structuring of sustainability science based on ontology engineering

In sustainability science (SS), it is difficult to identify what needs to be solved, and it is also not clear how to solve the problems that are identified. There has been no consensus on the underlying question of “What is structuring knowledge in SS?” This paper focuses on knowledge structuring accompanied by supporting of thinking. It addresses the key challenges associated with knowledge structuring in SS, identifies the requirements for the structuring of knowledge, proposes a reference model, and develops an ontology-based mapping tool as a solution to one layer of the reference model. First, we identify the important requirements for SS knowledge structuring. Second, we develop a reference model composed of five layers based on three of the requirements. Third, we develop an ontology-based mapping tool at Layer 2 of the reference model for meeting the two major challenges for SS, namely, identifying what problems should be addressed in SS itself and proposing solutions for those problems. The tool is designed to store and retrieve information regarding SS, to provide access to a prototype ontology for SS, and to create multiple maps of conceptual chains depending on a user’s interests and perspectives. Finally, we assess whether the developed tool successfully realizes the targeted part of the reference model for SS by examining the tool’s conformity to the reference model, as well as its usability, effectiveness, and constraints. Although several issues were identified in the prototype ontology and the mapping tool, the study concluded that the mapping tool is useful enough to facilitate the function of Layer 2. In particular, the mapping tool can support thinking about SS from the viewpoint of: (a) finding new potentials and risks of technological countermeasures studied in SS; (b) helping users to get a more comprehensive picture of problems and their potential solutions; and (c) providing an effective opportunity to come up with new ideas that might not be thought of without such a tool.     

Techniques to separate metal from waste printed circuit boards from discarded personal computers

Waste printed circuit boards contain valuable metals such as Au, Pd, Ag, and Cu that can be reutilized and harmful elements such as Pb, Br, and Cr that must be removed from the viewpoint of environmental conservation. In this research, we examined a method that separates the materials from printed circuit boards contained in discarded personal computers. After cutting the printed circuit boards to a size of 20 × 20 mm, they were heated at 873 K under an Ar atmosphere to remove organic resins containing elements such as C, H, and N. After heat treatment, the printed circuit boards were crushed using a planetary ball mill and the pulverized powders were filtered. The fraction with a granularity of greater than 250 μm was separated into magnetic and nonmagnetic materials by a magnetic field. Because the fraction with a granularity of less than 250 μm contained 39 mass% of C, it was heated at 1273 K in an atmosphere of 95% Ar and 5% O₂ to allow carbon combustion to take place, followed by metal reduction processing at the same temperature in an atmosphere of 97% Ar and 3% H₂. The basicity of the resulting powder was adjusted and the powder was heated at 1773 K under an Ar atmosphere. The proposed method separated the slag and metal, and 80% of the valuable metals contained in printed circuit boards could be collected.     

Promoting Sustainability with Ecological, Economic and Social Dimensions in Developing Countries

Sustainable development is one of the most important ideas, and goals of our time. It is defined as ＂development which meets the needs and aspirations of the current generation and develops safe and sound society for future generation＂. Achieving sustainable development thus involves a vigorous and urgent debate on different dimensions. The different dimensions of sustainability as a framework involve all issues such as science, technology, economic growth and development, health, education, finance investment and trade, politics, natural disasters, population growth and terrorism, etc. No single dimension is responsible to develop sustainable society. This article mainly described the integrated relationship among the three dimensions ofsustainability.     

Effectiveness of an air cleaner device in reducing aerosol numbers and airborne bacteria from an enclosed type dairy barn

Environmental Science and Pollution Research - There is growing pressure to find technically feasible and economically viable solutions in reducing emissions of pollutants from various occupational...