New insight to tourism-environment nexus in Mediterranean countries: evidence from panel vector autoregression approach

Environment, Development and Sustainability - This paper analyzed the relationship between environmental performance and tourism sector development in Mediterranean countries for the period from...     

Leaching Characteristics of Fly Ash from Thermal Power Plants of Soma and Tunçbilek, Turkey

Use of lignite in power generation has led to increasing environmental problems associated not only with gaseous emissions but also with the disposal of ash residues. In particular, use of low quality coal with high ash content results in huge quantities of fly ash to be disposed of. The main problem related to fly ash disposal is the heavy metal content of the residue. In this regard, experimental results of numerous studies indicate that toxic trace metals may leach when fly ash contacts water. In this study, fly ash samples obtained from thermal power plants, namely Soma and Tunçbilek, located at the west part of Turkey, were subjected to toxicity tests such as European Committee for standardization (CEN) and toxicity characteristic leaching (TCLP) procedures of the U.S. Environmental Protection Agency (U.S. EPA). The geochemical composition of the tested ash samples from the power plant show variations depending on the coal burned in the plants. Furthermore, the CEN and TCLP extraction results showed variations such that the ash samples were classified as `toxic waste' based on TCLP result whereas they were classified as `non-toxic' wastes based on CEN results, indicating test results are pH dependent.     

The role of endogenous nitric oxide in melatonin-improved tolerance to lead toxicity in maize plants

Melatonin (MT) and nitric oxide (NO) are known as scavengers of free radicals and an antioxidant against biotic and abiotic stresses in plant defense systems. However, whether NO interplays role in MT-induced antioxidant defense remains to be determined in the plants exposed to lead (Pb) toxicity. So, two experiments were designed to evaluate the role of NO in MT-mediated tolerance of maize plants to Pb stress. In the initial experiment, prior to starting different treatments, a solution of 0.05- or 0.10-mM MT was sprayed every other day for a period of 10 days to the leaves of maize plants exposed to Pb stress (0.1-mM PbCl₂). Pb toxicity significantly caused reduction in plant biomass (both fresh and dry), PSII maximum efficiency (F_v/F_m), total chlorophyll, leaf potassium (K), calcium (Ca), and leaf water potential, but it resulted in increased levels of proline, hydrogen peroxide (H₂O₂), malondialdehyde (MDA), electron leakage (EL), leaf Pb, and endogenous NO. An addition experiment was set up to further understand whether NO played role in mitigation of Pb toxicity in maize plants by MT using scavengers of NO and cPTIO combined with the MT treatments. MT-induced tolerance to Pb toxicity was totally eliminated by cPTIO by reversing endogenous NO. The present results clearly indicated that MT mediated the endogenous NO to improve tolerance of maize plants to Pb toxicity. This evidence was also supported by the increases of H₂O₂ and MDA and reduces some antioxidant enzyme activities tested as well as the plant growth inhibition and increased leaf Pb content by application of MT combined with cPTIO.

     

Study of a winter PM episode in Istanbul using the high resolution WRF/CMAQ modeling system

High winter-time PM₁₀, sulfate, nitrate and ammonium levels in Istanbul were investigated using a high resolution WRF/CMAQ mesoscale model system. A model-ready anthropogenic emission inventory on 2 km spatial resolution was developed for the area and the present study is the first attempt to test these emissions. The results suggested that the system was capable of producing the magnitudes. PM₁₀ levels calculated by the model underestimated the observations with an average of 10 per cent at Bogazici University sampling station, whereas an overestimation of 12 per cent is calculated for all stations. High uncertainties, particularly in traffic and coal combustion, led to over estimations around emission hot spots. Base case results together with the sensitivity studies pointed significant contribution of local sources, pointing to the need of control strategies focusing on primary particulate emissions.     

Preparation, Thermal Properties and Thermal Reliability of Form-Stable Paraffin/Polypropylene Composite for Thermal Energy Storage

This study is focused on the preparation, characterization, and determination of thermal properties and thermal reliability of paraffin/polypropylene (PP) composite as a novel form-stable phase change material (PCM) for thermal energy storage applications. In the composite, paraffin acts as a PCM when PP is operated as supporting material. The composites prepared at different mass fractions of paraffin (50, 60, 70, 80, and 90 w/w%) by solution casting method were subjected to leakage test by heating the composites over the melting temperature of the PCM. The paraffin/PP composite (70/30 w/w%) is found as the maximum paraffin containing composite and was characterized using Fourier transform infrared spectroscopy, optic microscopy, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA) techniques. DSC analysis indicated that the form-stable paraffin/PP composite melts at 44.77–45.52 °C and crystallizes at 53.55–54.80 °C. It has latent heats of 136.16 and −136.59 J/g for melting and crystallization, respectively. These thermal properties make it potential PCM for latent heat thermal energy storage (LHTES) purposes such as solar space heating applications. Accelerated thermal cycling tests indicated that the form-stable PCM had good thermal reliability. TGA also showed that the form-stable PCM degrades in two distinguishable steps and had good chemical stability.     

Interactions between metals accumulated in the narrow-clawed crayfish Astacus leptodactylus (Eschscholtz, 1823) in Dikilitaş Lake,Turkey

The accumulations of Al, Cd, Cr, Cu, Fe, Ni, Pb and Zn in the exoskeleton, gills, hepatopancreas and abdominal muscles of crayfish Astacus leptodactylus (Eschscholtz, 1823) were determined. The strongest correlation observed was between Cr and Ni in the gills (r?=?0.904); moderate to strong correlations between Al, Cr, Fe, Ni and Cu were also observed in gill tissue. Disregarding the gills, the strongest correlation was found between Cu and Zn in the hepatopancreas (r?=?0.808); the correlation between these two metals might have been a result of metallothionein activity. The accumulation of Pb was found to correlate with that of Cd in the exoskeleton, Cd and Zn in the gills, Zn and Cu in the hepatopancreas and Cu in the abdominal muscle. None of these correlations were present in lakewater and sediment samples, suggesting that the crayfish metabolism may be responsible for the co-accumulation of metal–metal pairs. As all correlations in non-gill tissues are observed between divalent metals, a shared transporter such as divalent metal transporter 1 might be involved in the accumulation of these metals.     

Concentrations of cadmium and lead heavy metals in Dardanelles seawater

Cadmium and lead were determined simultaneously in seawater by differential pulse stripping voltammetry (DPSV) preceded by adsoptive collection of complexes with 8-hydroxyquinoline (oxine) on to a hanging mercury drop electrode (HMDE). In preliminary experiments the optimal analytical condition for oxine concentration was found to be 2.10⁻⁵ M, at pH 7.7, the accumulation potential was −1.1 V, and the initial scannig potential was −0.8 V. The peak potentials were found −0.652 V for Cd and −0.463 V for Pb At the 60 s accumalation time. The limit of detection (LOD) and limit of quantitatification (LOQ) were found to be by voltammetry as 0.588 and 1.959 μg l⁻¹ (RSD, 5.50%) for Cd and 0.931 and 3.104 μg l⁻¹ (RSD, 4.10%) for Pb at 60 s stirred accumulation time respectively. In these conditions the most of the seawater samples are amenable for direct voltammetric determination of cadmium and lead using a HMDE. An adsorptive stripping mechanism of the electrode reaction was proposed. For the comparison, seawater samples were also analysed by ICP-atomic emission spectrometry method (ICP-AES). The applied voltammetric technique was validated and good recoveries were obtained.     

Earthworm Aporrectodea molleri (oligochaeta)’s coelomic fluid-associated bacteria modify soil biochemical properties and improve maize (Zea mays L.) plant growth under abiotic stress conditions

Environmental Science and Pollution Research - This study evaluated the impact of Aporrectodea molleri's coelomic fluid-associated bacteria (CFB) on Zea mays L. growth and soil biochemical...     

The impact of natural resources and gross capital formation on economic growth in the context of globalization: evidence from developing countries on the continent of Europe,Asia, Africa,and America

Environmental Science and Pollution Research - The aim of this paper is to investigate the nexus between natural resources, gross capital formation, globalization, and economic growth in the...     

Effects of farmyard manure and chemical fertilizers on the nutritional status of the loquat trees

The nutritional status of the loquat trees was investigated using cattle manure and commercial fertilizers for three years. The farmyard manure increased N, P, K, Mg, Fe and Zn contents of the leaves. No significant difference was found between the fertilizer types for trunk growth. Yield efficiency was nearly doubled by application of farmyard manure. Fertilizers did not affect the weight and shape of the fruits; however, commercial fertilizers led the lower total acidity in fruits. It was concluded that the loquat trees grown in sandy soils could fulfill their principal nutrient requirements for growth and commercial yield with application of farmyard manure.